Difference between revisions of "Template:OfficialUbuntuCore"

Revision as of 10:30, 10 February 2020

   User Name: pi
   Password: pi

   User Name: Root
   Password: fa

$ sudo apt-get update

By default "eth0" is assigned an IP address obtained via dhcp. If you want to change the setting you need to change the following file:

vi /etc/network/interfaces.d/eth0

For example if you want to assign a static IP to it you can run the following commands:

auto eth0
iface eth0 inet static
    address 192.168.1.231
    netmask 255.255.255.0
    gateway 192.168.1.1

To change the setting of "eth1" you can add a new file similar to eth0's configuration file under the /etc/network/interfaces.d/ directory.

@@ Line 1: / Line 1: @@
-==FriendlyCore的使用==
+==Work with FriendlyCore==
-===FriendlyCore默认帐户===
+===FriendlyCore User Account===
-*普通用户：
+*Non-root User:
-     用户名: pi
+     User Name: pi
-     密码: pi
+     Password: pi
-*Root用户：
+*Root:
-     用户名: Root用户：
+     User Name: Root
-     密码: fa
+     Password: fa
-===更新软件包===
+===Update Software Packages===
 <syntaxhighlight lang="bash">
 $ sudo apt-get update
 </syntaxhighlight>
-===配置网络===
+===Setup Network Configurations===
-默认已将 eth0 配置成 dhcp 自动获取IP地址，要更改配置，可以修改这个文件：
+By default "eth0" is assigned an IP address obtained via dhcp. If you want to change the setting you need to change the following file:
 <syntaxhighlight lang="bash">
 vi /etc/network/interfaces.d/eth0
 </syntaxhighlight>
-比如修改成静态IP地址，如下所示：
+For example if you want to assign a static IP to it you can run the following commands:
 <syntaxhighlight lang="bash">
 auto eth0
@@ Line 24: / Line 24: @@
      gateway 192.168.1.1
 </syntaxhighlight>
-要配置另一个网口 eth1，可以在 /etc/network/interfaces.d/ 下新增一个 eth1 文件，配置格式可以参考 eth0。
+To change the setting of "eth1" you can add a new file similar to eth0's configuration file under the /etc/network/interfaces.d/ directory.