Difference between revisions of "LED"
From FriendlyELEC WiKi
(Created page with "查看中文") |
|||
| Line 1: | Line 1: | ||
[[LED/zh|查看中文]] | [[LED/zh|查看中文]] | ||
| + | |||
| + | ==H3/H5== | ||
| + | 板载status LED默认都是心跳灯状态，通过下面的命令可以查看相关的设置： | ||
| + | $ cat /sys/class/leds/status_led/trigger | ||
| + | none rc-feedback rfkill-any kbd-scrolllock kbd-numlock kbd-capslock kbd-kanalockk | ||
| + | kbd-shiftlock kbd-altgrlock kbd-ctrllock kbd-altlock kbd-shiftllock kbd-shiftrll | ||
| + | ock kbd-ctrlllock kbd-ctrlrlock usbport usb-gadget usb-host mmc1 mmc2 mmc0 timerr | ||
| + | oneshot disk-activity ide-disk mtd nand-disk [heartbeat] backlight gpio cpu cpuu | ||
| + | 0 cpu1 cpu2 cpu3 default-on transient flash torch panic netdev rfkill0 stmmac-0:: | ||
| + | 00:1Gbps stmmac-0:00:100Mbps stmmac-0:00:10Mbps | ||
| + | [heartbeat]表示该 LED 的默认触发方式为心跳状态，通过改变trigger节点的值就可以改变LED的触发方式。<br> | ||
| + | 举例执行下面的命令可以让LED 保持常亮： | ||
| + | echo default-on > /sys/class/leds/status_led/trigger | ||
Revision as of 03:31, 30 October 2019
H3/H5
板载status LED默认都是心跳灯状态，通过下面的命令可以查看相关的设置： $ cat /sys/class/leds/status_led/trigger none rc-feedback rfkill-any kbd-scrolllock kbd-numlock kbd-capslock kbd-kanalockk
kbd-shiftlock kbd-altgrlock kbd-ctrllock kbd-altlock kbd-shiftllock kbd-shiftrll
ock kbd-ctrlllock kbd-ctrlrlock usbport usb-gadget usb-host mmc1 mmc2 mmc0 timerr
oneshot disk-activity ide-disk mtd nand-disk [heartbeat] backlight gpio cpu cpuu
0 cpu1 cpu2 cpu3 default-on transient flash torch panic netdev rfkill0 stmmac-0::
00:1Gbps stmmac-0:00:100Mbps stmmac-0:00:10Mbps
[heartbeat]表示该 LED 的默认触发方式为心跳状态，通过改变trigger节点的值就可以改变LED的触发方式。
举例执行下面的命令可以让LED 保持常亮：
echo default-on > /sys/class/leds/status_led/trigger
