Difference between revisions of "CPU/zh"

Revision as of 06:41, 23 August 2019

1 RK3399

1.1 查看cpu0-3 支持的频率

cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies

1.2 锁定cpu0-3 的最高频率为816 mhz

echo 816000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq

1.3 查看cpu4-5 支持的频率

cat /sys/devices/system/cpu/cpu4/cpufreq/scaling_available_frequencies

1.4 锁定cpu4-5 的最高频率为1008 mhz

echo 1008000 > /sys/devices/system/cpu/cpu4/cpufreq/scaling_max_freq

1.5 查看当前频率

cat /sys/devices/system/cpu/cpu[04]/cpufreq/cpuinfo_cur_freq

2 S5P4418/S5P6818

2.1 锁定CPU的最高频率

2.1.1 Method 1

The following command is used to temporarily limit the maximum CPU frequency to 1GHz: echo 1000000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq

2.1.2 Method 2

Modify the kernel source code:

arch/arm/plat-s5p4418/nanopi2/device.c

Delete the unwanted frequencies in the following array:

static unsigned long dfs_freq_table[][2] = {
    { 1400000, 1200000, },
    { 1200000, 1120000, },
    { 1000000, 1040000, },
    {  800000, 1000000, },
    {  700000,  940000, },
    {  600000,  940000, },
    {  500000,  940000, },
    {  400000,  940000, },
};

2.2 CPU thermal

读取以下文件获得当前的CPU温度：
S5P4418/S5P6818:
/sys/class/hwmon/hwmon0/device/temp_label
Allwinner H3/H5/A64:
/sys/class/thermal/thermal_zone0/temp
RK3399，获取CPU温度和运行频率:

while true; do
	t1=`cat /sys/class/thermal/thermal_zone0/temp`
	t2=`cat /sys/class/thermal/thermal_zone1/temp`
	f1=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq`
	f2=`cat /sys/devices/system/cpu/cpu4/cpufreq/cpuinfo_cur_freq`
	echo "$t1 $t2  $f1 $f2"
	sleep 1
	#cat /sys/class/thermal/thermal_zone[01]/temp
	#cat /sys/devices/system/cpu/cpu[04]/cpufreq/cpuinfo_cur_freq
done

3 H3

3.1 CPU DVFS

3.1.1 Linux-4.14

对于H3系列的开发板，使用的都是同样的DVFS设置，相关代码位于arch/arm/boot/dts/sun8i-h3-nanopi.dtsi:

&cpu0 {
	operating-points = <
		1008000	1300000
		816000	1100000
		624000	1100000
		480000	1100000
		312000	1100000
		240000	1100000
		120000	1100000
		>;
	#cooling-cells = <2>;
	cooling-min-level = <0>;
	cooling-max-level = <6>;
	cpu0-supply = <&vdd_cpux>;
};
 
&cpu_thermal {
	trips {
		cpu_warm: cpu_warm {
			temperature = <65000>;
			hysteresis = <2000>;
			type = "passive";
		};
		cpu_hot: cpu_hot {
			temperature = <75000>;
			hysteresis = <2000>;
			type = "passive";
		};
		cpu_very_hot: cpu_very_hot {
			temperature = <90000>;
			hysteresis = <2000>;
			type = "passive";
		};
		cpu_crit: cpu_crit {
			temperature = <105000>;
			hysteresis = <2000>;
			type = "critical";
		};
	};
 
	cooling-maps {
		cpu_warm_limit_cpu {
			trip = <&cpu_warm>;
			cooling-device = <&cpu0 THERMAL_NO_LIMIT 1>;
		};
		cpu_hot_limit_cpu {
			trip = <&cpu_hot>;
			cooling-device = <&cpu0 2 3>;
		};
		cpu_very_hot_limit_cpu {
			trip = <&cpu_very_hot>;
			cooling-device = <&cpu0 5 THERMAL_NO_LIMIT>;
		};
	};
};

3.1.1.1 关闭cpu核

以关闭cpu1为例：

echo 0 > /sys/devices/system/cpu/cpu1/online

3.2 CPU ID

3.2.1 Linux-4.14

As for Allwinner H2+/H3/H5/ SoCs each of these CPUs has an internal 16-btye CHIP ID which can be read by running the following commands in the Linux-4.14 kernel:

$ apt-get install bsdmainutils
$ hexdump /sys/bus/nvmem/devices/sunxi-sid0/nvmem 
0000000 8082 0447 0064 04c3 3650 ce0a 1e28 2202
0000010 0002 0000 0000 0000 0000 0000 0000 0000
0000020 0000 0000 0000 0000 0000 0000 0000 0000
0000030 0000 0008 0508 0000 0000 0000 0000 0000
0000040 0000 0000 0000 0000 0000 0000 0000 0000

"8082 0447 0064 04c3 3650 ce0a 1e28 2202" is the 16-byte CHIP ID.

3.3 CPU thermal

3.3.1 Linux-4.14

$ cat /sys/class/thermal/thermal_zone0/temp
30489

表示当前CPU温度为30.489摄氏度。

4 H5

4.1 CPU DVFS

4.1.1 Linux-4.14

对于H5系列的开发板，不同型号的DVFS设置是不一样的。以NanoPi NEO2为例，相关代码位于arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts:

&cpu0 {
	operating-points = <
		1008000	1100000
		816000	1100000
		624000	1100000
		480000	1100000
		312000	1100000
		240000	1100000
		120000	1100000
		>;
	#cooling-cells = <2>;
	cooling-min-level = <0>;
	cooling-max-level = <6>;
	cpu0-supply = <&vdd_cpux>;
};
 
&cpu_thermal {
	trips {
		cpu_warm: cpu_warm {
			temperature = <65000>;
			hysteresis = <2000>;
			type = "passive";
		};
		cpu_hot: cpu_hot {
			temperature = <75000>;
			hysteresis = <2000>;
			type = "passive";
		};
		cpu_very_hot: cpu_very_hot {
			temperature = <90000>;
			hysteresis = <2000>;
			type = "passive";
		};
		cpu_crit: cpu_crit {
			temperature = <105000>;
			hysteresis = <2000>;
			type = "critical";
		};
	};
 
	cooling-maps {
		cpu_warm_limit_cpu {
			trip = <&cpu_warm>;
			cooling-device = <&cpu0 THERMAL_NO_LIMIT 1>;
		};
		cpu_hot_limit_cpu {
			trip = <&cpu_hot>;
			cooling-device = <&cpu0 2 3>;
		};
		cpu_very_hot_limit_cpu {
			trip = <&cpu_very_hot>;
			cooling-device = <&cpu0 5 THERMAL_NO_LIMIT>;
		};
	};
};

4.2 CPU ID

4.2.1 Linux-4.14