Difference between revisions of "4x USB 3.0 HAT for M4"
From FriendlyELEC WiKi
(→Features) |
(→Features) |
||
| Line 8: | Line 8: | ||
** Two 4-PIN PH2.0 USB 2.0 host connectors, independent bandwidth | ** Two 4-PIN PH2.0 USB 2.0 host connectors, independent bandwidth | ||
* '''Power''' | * '''Power''' | ||
| − | ** | + | ** One 5.5*2.1mm DC-Jack and One 4Pin PH2.0 connector for 12V Power Input |
** The output current of the 12V to 5V DC/DC regulator is up to 8A | ** The output current of the 12V to 5V DC/DC regulator is up to 8A | ||
** One PowerKey button | ** One PowerKey button | ||
Revision as of 08:07, 25 June 2019
1 Features
- USB 3.0
- based on VL805 USB 3.0 host Controller, via a single PCIe 2.0 Lane
- 4x USB 3.0 share 5Gbps Bandwidth
- fully backward compatible with USB 2.0 and 1.1 specifications
- USB 2.0
- Two 4-PIN PH2.0 USB 2.0 host connectors, independent bandwidth
- Power
- One 5.5*2.1mm DC-Jack and One 4Pin PH2.0 connector for 12V Power Input
- The output current of the 12V to 5V DC/DC regulator is up to 8A
- One PowerKey button
- Heat dissipation
- One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
- GPIO
- ALL the signals of the NanoPi M4's 40-PIN connector are populated
2 Block
3 Resources
- 2D CAD file M4_SATA_USB_2D_DWG.zip
