Difference between revisions of "Serial port"

Latest revision as of 06:02, 14 February 2019

查看中文

1 Serial port communication in C

Please refre：[1]

2 Serial Device Names under Multiple Platforms

2.1 Allwinner H3/H5 Based Boards (NanoPi M1/NanoPi M1 Plus etc)

UART1-> /dev/ttyS1
UART2 -> /dev/ttyS2
UART3 -> /dev/ttyS3 (Only applies to NanoPi M1, NanoPi K1 and NanoPi K1 Plus)

2.2 S5P4418 Based Boards (NanoPi Fire2A/NanoPi M2A/NanoPi S2/NanoPC-T2 etc)

UART1 -> /dev/ttyAMA1 [Note 1]
UART2 -> /dev/ttyAMA2 [Note 1]
UART3 -> /dev/ttyAMA3
UART4 -> /dev/ttyAMA4

2.3 S5P6818 Based Boards (NanoPi M3/NanoPC-T3 etc)

UART1 -> /dev/ttySAC1 [Note 1]
UART2 -> /dev/ttySAC2 [Note 1]
UART3 -> /dev/ttySAC3
UART4 -> /dev/ttySAC4

Note 1: only applies to specific boards, you need to check if a board has that serial device populated.

2.4 NanoPC T4

UART4 Only

Serial Port	Funcation
UART0	Bluetooth
UART1	Ehternet
UART2	Debug UART
UART3	Ehternet
UART4	Available, /dev/ttyS4

3 Uart Test Demo

• General test method

The serial device test method described below is a general test method, which is applicable to the Allwinner H3/H5 platform development board, the S5P4418 platform development board, and the S5P6818 platform development board.

step1）Get test demo：

$ git clone https://github.com/friendlyarm/comtest.git
$ cd comtest
$ gcc -o comtest comtest.c

step2）Usage.

$ ./comtest -d /dev/ttyS2 -s 115200

After that, the data can be received through the ttyS2.
Press the Esc key 3 times to exit the program.