Difference between revisions of "NanoPi M4 SATA HAT"
From FriendlyELEC WiKi
(→Features) |
(→Features) |
||
| Line 13: | Line 13: | ||
* '''USB''' | * '''USB''' | ||
** Two 4-PIN PH2.0 USB 2.0 host connector. | ** Two 4-PIN PH2.0 USB 2.0 host connector. | ||
| − | * '''Heat dissipation'' | + | * '''Heat dissipation''' |
** Two PCB nuts for mounting heatsink above the PCIe to SATA brigde | ** Two PCB nuts for mounting heatsink above the PCIe to SATA brigde | ||
** One 2-PIN PH2.0 connector for fan. 12V output and modulated by PWM1 | ** One 2-PIN PH2.0 connector for fan. 12V output and modulated by PWM1 | ||
| − | * GPIO | + | * '''GPIO''' |
** ALL the GPIOs of NanoPi M4 40-PIN connector are available | ** ALL the GPIOs of NanoPi M4 40-PIN connector are available | ||
Revision as of 03:51, 29 January 2019
Features
- SATA
- Four Sata Ports, Supports communication speeds of 6 Gbps, 3 Gbps, and 1.5 Gbps
- One 4-Pin power connector, include 12V and 5V output, which is able to carry large current
- Four LEDs for Indicating status of each Sata Port
- Power
- Two 12V Power Input options, include one DC-Jack and one 5566-04A Connector
- Output current of 12V to 5V DC/DC regulator is up to 8A
- One PowerKey button and PowerKey jumper
- USB
- Two 4-PIN PH2.0 USB 2.0 host connector.
- Heat dissipation
- Two PCB nuts for mounting heatsink above the PCIe to SATA brigde
- One 2-PIN PH2.0 connector for fan. 12V output and modulated by PWM1
- GPIO
- ALL the GPIOs of NanoPi M4 40-PIN connector are available
