Difference between revisions of "CPU"
From FriendlyELEC WiKi
(updated by API) |
|||
| Line 2: | Line 2: | ||
==S5P4418/S5P6818== | ==S5P4418/S5P6818== | ||
| − | === | + | ===Setting CPU's Max Clock=== |
====Method 1==== | ====Method 1==== | ||
The following command is used to temporarily limit the maximum CPU frequency to 1GHz: | The following command is used to temporarily limit the maximum CPU frequency to 1GHz: | ||
| Line 29: | Line 29: | ||
===CPU thermal=== | ===CPU thermal=== | ||
| − | + | Get CPU's working temperature by reading the following files:<br /> | |
S5P4418/S5P6818:<br /> | S5P4418/S5P6818:<br /> | ||
/sys/class/hwmon/hwmon0/device/temp_label<br /> | /sys/class/hwmon/hwmon0/device/temp_label<br /> | ||
Allwinner H3/H5/A64:<br /> | Allwinner H3/H5/A64:<br /> | ||
/sys/class/thermal/thermal_zone0/temp<br /> | /sys/class/thermal/thermal_zone0/temp<br /> | ||
| − | + | RK3399, get CPU's working temperature and clock:<br /> | |
<syntaxhighlight lang="text"> | <syntaxhighlight lang="text"> | ||
while true; do | while true; do | ||
| Line 51: | Line 51: | ||
===CPU DVFS=== | ===CPU DVFS=== | ||
====Linux-4.14==== | ====Linux-4.14==== | ||
| − | + | All H3 based boards have the same DVFS setting and the code is in the "arch/arm/boot/dts/sun8i-h3-nanopi.dtsi" file: | |
<syntaxhighlight lang="text"> | <syntaxhighlight lang="text"> | ||
&cpu0 { | &cpu0 { | ||
Revision as of 03:06, 15 January 2019
Contents
1 S5P4418/S5P6818
1.1 Setting CPU's Max Clock
1.1.1 Method 1
The following command is used to temporarily limit the maximum CPU frequency to 1GHz: echo 1000000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
1.1.2 Method 2
Modify the kernel source code:
arch/arm/plat-s5p4418/nanopi2/device.c
Delete the unwanted frequencies in the following array:
static unsigned long dfs_freq_table[][2] = {
{ 1400000, 1200000, },
{ 1200000, 1120000, },
{ 1000000, 1040000, },
{ 800000, 1000000, },
{ 700000, 940000, },
{ 600000, 940000, },
{ 500000, 940000, },
{ 400000, 940000, },
};1.2 CPU thermal
Get CPU's working temperature by reading the following files:
S5P4418/S5P6818:
/sys/class/hwmon/hwmon0/device/temp_label
Allwinner H3/H5/A64:
/sys/class/thermal/thermal_zone0/temp
RK3399, get CPU's working temperature and clock:
while true; do t1=`cat /sys/class/thermal/thermal_zone0/temp` t2=`cat /sys/class/thermal/thermal_zone1/temp` f1=`cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq` f2=`cat /sys/devices/system/cpu/cpu4/cpufreq/cpuinfo_cur_freq` echo "$t1 $t2 $f1 $f2" sleep 1 #cat /sys/class/thermal/thermal_zone[01]/temp #cat /sys/devices/system/cpu/cpu[04]/cpufreq/cpuinfo_cur_freq done
2 H3
2.1 CPU DVFS
2.1.1 Linux-4.14
All H3 based boards have the same DVFS setting and the code is in the "arch/arm/boot/dts/sun8i-h3-nanopi.dtsi" file:
&cpu0 {
operating-points = <
1008000 1300000
816000 1100000
624000 1100000
480000 1100000
312000 1100000
240000 1100000
120000 1100000
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
cooling-max-level = <6>;
cpu0-supply = <&vdd_cpux>;
};
&cpu_thermal {
trips {
cpu_warm: cpu_warm {
temperature = <65000>;
hysteresis = <2000>;
type = "passive";
};
cpu_hot: cpu_hot {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_very_hot: cpu_very_hot {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu_crit {
temperature = <105000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
cpu_warm_limit_cpu {
trip = <&cpu_warm>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT 1>;
};
cpu_hot_limit_cpu {
trip = <&cpu_hot>;
cooling-device = <&cpu0 2 3>;
};
cpu_very_hot_limit_cpu {
trip = <&cpu_very_hot>;
cooling-device = <&cpu0 5 THERMAL_NO_LIMIT>;
};
};
};2.2 CPU ID
2.2.1 Linux-4.14
As for Allwinner H2+/H3/H5/ SoCs each of these CPUs has an internal 16-btye CHIP ID which can be read by running the following commands in the Linux-4.14 kernel:
$ apt-get install bsdmainutils $ hexdump /sys/bus/nvmem/devices/sunxi-sid0/nvmem 0000000 8082 0447 0064 04c3 3650 ce0a 1e28 2202 0000010 0002 0000 0000 0000 0000 0000 0000 0000 0000020 0000 0000 0000 0000 0000 0000 0000 0000 0000030 0000 0008 0508 0000 0000 0000 0000 0000 0000040 0000 0000 0000 0000 0000 0000 0000 0000
"8082 0447 0064 04c3 3650 ce0a 1e28 2202" is the 16-byte CHIP ID.
2.3 CPU thermal
2.3.1 Linux-4.14
$ cat /sys/class/thermal/thermal_zone0/temp 30489
表示当前CPU温度为30.489摄氏度。
3 H5
3.1 CPU DVFS
3.1.1 Linux-4.14
对于H5系列的开发板，不同型号的DVFS设置是不一样的。 以NanoPi NEO2为例，相关代码位于arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts:
&cpu0 {
operating-points = <
1008000 1100000
816000 1100000
624000 1100000
480000 1100000
312000 1100000
240000 1100000
120000 1100000
>;
#cooling-cells = <2>;
cooling-min-level = <0>;
cooling-max-level = <6>;
cpu0-supply = <&vdd_cpux>;
};
&cpu_thermal {
trips {
cpu_warm: cpu_warm {
temperature = <65000>;
hysteresis = <2000>;
type = "passive";
};
cpu_hot: cpu_hot {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_very_hot: cpu_very_hot {
temperature = <90000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu_crit {
temperature = <105000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
cpu_warm_limit_cpu {
trip = <&cpu_warm>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT 1>;
};
cpu_hot_limit_cpu {
trip = <&cpu_hot>;
cooling-device = <&cpu0 2 3>;
};
cpu_very_hot_limit_cpu {
trip = <&cpu_very_hot>;
cooling-device = <&cpu0 5 THERMAL_NO_LIMIT>;
};
};
};3.2 CPU ID
3.2.1 Linux-4.14
As for Allwinner H2+/H3/H5/ SoCs each of these CPUs has an internal 16-btye CHIP ID which can be read by running the following commands in the Linux-4.14 kernel:
$ apt-get install bsdmainutils $ hexdump /sys/bus/nvmem/devices/sunxi-sid0/nvmem 0000000 8082 0447 0064 04c3 3650 ce0a 1e28 2202 0000010 0002 0000 0000 0000 0000 0000 0000 0000 0000020 0000 0000 0000 0000 0000 0000 0000 0000 0000030 0000 0008 0508 0000 0000 0000 0000 0000 0000040 0000 0000 0000 0000 0000 0000 0000 0000
"8082 0447 0064 04c3 3650 ce0a 1e28 2202" is the 16-byte CHIP ID.
3.3 CPU thermal
3.3.1 Linux-4.14
$ cat /sys/class/thermal/thermal_zone0/temp 30489
表示当前CPU温度为30.489摄氏度。
