Difference between revisions of "NanoPC-T4"

From FriendlyELEC WiKi
Jump to: navigation, search
(Created page with "查看中文 ==Introduction== Overview Front Back ==Hard...")
 
(→‎Hardware Spec)
Line 7: Line 7:
  
  
−
==Hardware Spec==
+
* SoC: Rockchip RK3399
−
* SoC:  
+
** CPU: big.LITTLE，Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53(up to 1.5GHz)
−
* Power Management Unit:
+
** GPU: Mali-T864 GPU，supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC
−
* System Memory:
+
** VPU: 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
−
* Storage:  
+
* PMU: RK808-D PMIC, cooperated with Independent DC/DC, enabling DVFS, solfware power-down, RTC wake-up, system sleep mode
−
* Ethernet:
+
* RAM: Dual-Channel 4GB LPDDR3
−
* WiFi:  
+
* Flash: 16GB eMMC 5.1 Flash
−
* Bluetooth:  
+
* Ethernet: Native Gigabit Ethernet
−
* Video Input:  
+
* Wi-Fi/BT: 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, dual antenna interface
−
* Video Output:
+
* Video Input: two 4-Line MIPI-CSI, dual ISP, up to 13MPix/s，supports simultaneous input of dual camera data
−
** HDMI:
+
* Video output
−
** DP on Type-C:
+
** HDMI: HDMI 2.0a, supports 4K 60Hz，HDCP 1.4/2.2
−
** LCD Interface:  
+
** DP on Type-C: DisplayPort 1.2 Alt Mode on USB Type-C
−
* Audio Out:  
+
** LCD Interface: one eDP 1.3（4 line，10.8Gbps）, one 4-Line MIPI-DSI
−
* Audio In:
+
* Audio Out: 3.5mm Dual channel headphone jack, or HDMI
−
* USB 2.0 Host:
+
* Audio In: Onboard microphone
−
* USB 3.0 Host:
+
* USB 2.0: 2 independent native USB 2.0 Host A interfaces
−
* USB Type-C:  
+
* USB 3.0: 1 native USB 3.0 Host A type interface
−
* GPIO:  
+
* USB Type-C: Supports USB3.0 Type-C 和 DisplayPort 1.2 Alt Mode on USB Type-C
−
* Serial Debug Port: 2.54mm pitch 4-pin-header
+
* PCIe: One M.2 M-Key PCIe x4 socket, compatible with PCIe 2.1, Dual operation mode; Onboard M.2 2280 moduel M3 mounting Stud
−
* User Key: Power, Reset, boot Select, Recovery
+
* 40Pin GPIO Extension ports:  
 +
** 1 X 3V/1.8V I2C, up to 2 x 3V UART, 1 X 3V SPI, 1 x SPDIF_TX, up to 8 x 3V GPIOs
 +
** Eight-channel I2S, supports 8-channel digital microphone array input, 1.8V signal level
 +
* ADC: 3 x 1.8V ADC inputs, 5 Pin 2.54mm header
 +
* Debug: one Debug UART, 4 Pin 2.54mm header, 3V level, 1500000bps
 +
* Keys: PowerKey, Reset, MASKROM(BOOT), Recovery
 
* LED: 1 x power LED and 1 x GPIO Controled LED
 
* LED: 1 x power LED and 1 x GPIO Controled LED
−
* RTC Battery: RTC Battery Seat
+
* IR reciver: Onboard IR reciver, Acceptes 38KHz carrier frequency
−
* Heat Sink: 1 x Heat Sink with mounting holes
+
* RTC Battery: 2 Pin 1.27/1.25mm RTC battery input connector
−
* Power: DC 12V/2A
+
* Cooling: two 2.5mm studs for mounting heat sink; 3 Pin 12V cooling fan interface with PWM
−
* PCB: Ten Layer
+
* Power supply: DC 12V/2A
−
* Dimension: 100 mm x 64 mm
+
* PCB: Ten Layer, 100 mm x 64 mm
−
* Ambient Operating Temperature: 0℃ to 80℃
+
*Ambient Operating Temperature: 0℃ to 80℃
−
* OS/Software: uboot, Android and Ubuntu
+
  
 
==Software Features==
 
==Software Features==

Revision as of 04:33, 21 May 2018

查看中文

1 Introduction

Overview
Front
Back


  • SoC: Rockchip RK3399
    • CPU: big.LITTLE，Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53(up to 1.5GHz)
    • GPU: Mali-T864 GPU，supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC
    • VPU: 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
  • PMU: RK808-D PMIC, cooperated with Independent DC/DC, enabling DVFS, solfware power-down, RTC wake-up, system sleep mode
  • RAM: Dual-Channel 4GB LPDDR3
  • Flash: 16GB eMMC 5.1 Flash
  • Ethernet: Native Gigabit Ethernet
  • Wi-Fi/BT: 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, dual antenna interface
  • Video Input: two 4-Line MIPI-CSI, dual ISP, up to 13MPix/s，supports simultaneous input of dual camera data
  • Video output
    • HDMI: HDMI 2.0a, supports 4K 60Hz，HDCP 1.4/2.2
    • DP on Type-C: DisplayPort 1.2 Alt Mode on USB Type-C
    • LCD Interface: one eDP 1.3（4 line，10.8Gbps）, one 4-Line MIPI-DSI
  • Audio Out: 3.5mm Dual channel headphone jack, or HDMI
  • Audio In: Onboard microphone
  • USB 2.0: 2 independent native USB 2.0 Host A interfaces
  • USB 3.0: 1 native USB 3.0 Host A type interface
  • USB Type-C: Supports USB3.0 Type-C 和 DisplayPort 1.2 Alt Mode on USB Type-C
  • PCIe: One M.2 M-Key PCIe x4 socket, compatible with PCIe 2.1, Dual operation mode; Onboard M.2 2280 moduel M3 mounting Stud
  • 40Pin GPIO Extension ports:
    • 1 X 3V/1.8V I2C, up to 2 x 3V UART, 1 X 3V SPI, 1 x SPDIF_TX, up to 8 x 3V GPIOs
    • Eight-channel I2S, supports 8-channel digital microphone array input, 1.8V signal level
  • ADC: 3 x 1.8V ADC inputs, 5 Pin 2.54mm header
  • Debug: one Debug UART, 4 Pin 2.54mm header, 3V level, 1500000bps
  • Keys: PowerKey, Reset, MASKROM(BOOT), Recovery
  • LED: 1 x power LED and 1 x GPIO Controled LED
  • IR reciver: Onboard IR reciver, Acceptes 38KHz carrier frequency
  • RTC Battery: 2 Pin 1.27/1.25mm RTC battery input connector
  • Cooling: two 2.5mm studs for mounting heat sink; 3 Pin 12V cooling fan interface with PWM
  • Power supply: DC 12V/2A
  • PCB: Ten Layer, 100 mm x 64 mm
  • Ambient Operating Temperature: 0℃ to 80℃

2 Software Features

3 Diagram, Layout and Dimension

3.1 Layout

File:NanoPC-T4-1802-IF-01.png
NanoPC-T4 Layout
  • 40Pin GPIO Pin Spec
Pin# Name Pin# Name
  • eDP Interface Pin Spec
Pin# Name Pin# Name
  • MIPI-CSI Interface Pin Spec
Pin# MIPI-CSI2
  • MIPI-DSI Interface Pin Spec
Pin# Name


Notes
  1. For more details refer to the document:

3.2 Board Dimension

NanoPC-T3 Dimensions

For more details refer to the document:
  • Power Jack

4 Notes in Hardware Design

Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=NanoPC-T4&oldid=14153"