Difference between revisions of "1-bay NAS Dock"
From FriendlyELEC WiKi
(→介绍) |
|||
| Line 1: | Line 1: | ||
[[1-bay NAS Dock/zh|查看中文]] | [[1-bay NAS Dock/zh|查看中文]] | ||
| − | == | + | ==Introduction== |
[[File:1-bay NAS Dock.jpg|thumb|1-bay NAS Dock]] | [[File:1-bay NAS Dock.jpg|thumb|1-bay NAS Dock]] | ||
| − | * 1-bay NAS | + | * The 1-bay NAS Dock is an expansion board which can be used to connect an external hard disk to a FriendlyElec’s NanoPi NEO. Together with FriendlyElec's customized aluminum case and NanoPi NEO you can quickly assemble a storage server. |
| − | * | + | * It uses JM20329 USB2SATA IC and communicates with a NanoPi NEO via USB interface. |
| − | * | + | * It works with a 2.5" SATA hard disk. |
| − | * | + | * It uses TI’s DC-DC chipset to convert a 12V input to 5V. It has a power switch for users to turn on/off the device. |
| − | * | + | * Its dual-color LED can indicate a connected hard disk's status. When the LED is green it means the power is on. When it is red-blinking it means the connected hard disk is reading/writing. |
| + | Warning: when the status LED is red-blinking do NOT shut down the power or plug/unplug the power. | ||
==特性== | ==特性== | ||
Revision as of 13:56, 1 April 2017
Contents
1 Introduction
- The 1-bay NAS Dock is an expansion board which can be used to connect an external hard disk to a FriendlyElec’s NanoPi NEO. Together with FriendlyElec's customized aluminum case and NanoPi NEO you can quickly assemble a storage server.
- It uses JM20329 USB2SATA IC and communicates with a NanoPi NEO via USB interface.
- It works with a 2.5" SATA hard disk.
- It uses TI’s DC-DC chipset to convert a 12V input to 5V. It has a power switch for users to turn on/off the device.
- Its dual-color LED can indicate a connected hard disk's status. When the LED is green it means the power is on. When it is red-blinking it means the connected hard disk is reading/writing.
Warning: when the status LED is red-blinking do NOT shut down the power or plug/unplug the power.
2 特性
- 使用高速稳定的USB转SATA芯片
- 输入电压：12V
- 板载电源开关
- 双色状态指示灯
- USB Host接口
- 定制的金属外壳
- 完善的软件解决方案
- PCB尺寸（mm）：151x89.7
3 硬件组装步骤
搭建NAS设备，您需要准备以下物品：
(1) 1-bay NAS Dock；
(2) 配套螺丝；
(3) 2.5寸HDD硬盘；
(4) 带散热片的NanoPi NEO。
NAS设备组装步骤如下：
(1)把硬盘装配在模块的SATA接口，并在底面用螺丝固定，如下图所示
(2)把NanoPi NEO倒扣安装在排母上，如下图所示
(3)接上12V电源，硬件组装就完成了，如下图所示
4 软件安装
4.1 制作一张运行OpenMediaVault的TF卡
4.1.1 下载系统固件
首先访问下载地址下载固件文件(officail-ROMs目录)和烧写工具(tools目录)：
使用以下固件： Debian-for-nas-YYYYMMDD.img.zip 预装了OpenMediaVault软件的Debian系统固件 烧写工具： win32diskimager.rar Windows平台下的系统烧写工具，Linux平台下可以用dd命令烧写系统
4.1.2 制作系统TF卡
将固件Debian-for-nas-YYYYMMDD.img.zip和烧写工具win32diskimager.rar分别解压，在Windows下插入TF卡（限4G及以上的卡)，以管理员身份运行 win32diskimager 工具，
在win32diskimager工具的界面上，选择你的TF卡盘符，选择系统固件，点击 Write 按钮烧写即可。
烧写完成后，将制作好TF卡插入NanoPi NEO，使用12V电源给1-Bay NAS供电，
打开1-Bay NAS开关，看到NanoPi NEO上的蓝色LED闪烁，这说明系统已经开始启动了。
4.2 OpenMediaVault 的使用
test