Difference between revisions of "Matrix - Compact Kit"

Revision as of 10:59, 30 December 2015

查看中文

1 Introduction

• The Matrix-Compact Kit is a compact board with various hardware resources, interfaces and ports including user keys, LED, buzzer, ADC, compass, temperature sensor, IR receiver, TFT port and etc. This board can be connected to the NanoPi, NanoPi 2 and Raspberry Pi via its 40 pin header. In addition you can connect other external modules to its GPIOs.

2 Features

Matrix - Compact Kit has the following onboard resources:

• 0.9 TFT LCD

• 3 x tact switch

• 4 x 5mm LED

• Buzzer

• ADC

• Sliding rheostat

• 40 pin female connector

• 4 pin header - I2C interface

• 4 pin header - UART interface

• 3 pin double row pin-header - 3.3V and GND

• 18B20 temperature sensor

• IR receiver

• 10 x 3 pin header - 3 x AIO, 7 x DIO (two of them can be configured to PWM and four of them can be configured to SPI)

• Compass

3 Dimensional Diagram and Pin Description

• PCB Dimension(mm):

Matrix-Compact_Kit Interface

• 40 pin female connector's pin description

Pin#	Name	Pin#	Name
1	VDD_SYS_3.3V	2	VDD_5V
3	I2C0_SDA	4	VDD_5V
5	I2C0_SCL	6	DGND
7	GPIOB28	8	UART3_TXD
9	DGND	10	UART3_RXD
11	GPIOB29	12	GPIOB26
13	GPIOB30	14	DGND
15	GPIOB31	16	PWM2
17	VDD_SYS_3.3V	18	GPIOB27
19	SPI0_MOSI	20	DGND
21	SPI0_MISO	22	PWM0
23	SPI0_CLK	24	SPI0_CS
25	DGND	26	PWM1
27	I2C1_SDA	28	I2C1_SCL
29	GPIOC8	30	DGND
31	SPI2_CLK	32	GPIOC28
33	SPI2_CS	34	DGND
35	SPI2_MOSI	36	GPIOC7
37	SPI2_MISO	38	ALIVEGPIO2
39	DGND	40	ALIVEGPIO3

Matrix-Compact_Kit Interface

• 30 pin header's pin description

Pin#	Name	Pin#	Name	Pin#	Name
1	GND	2	VDD_5V	3	A1_PCF
4	GND	5	VDD_5V	6	A2_PCF
7	GND	8	VDD_5V	9	A3_PCF
10	GND	11	VDD_5V	12	D1_Pi11
13	GND	14	VDD_5V	15	D2_Pi26
16	GND	17	VDD_5V	18	D3_Pi16
19	GND	20	VDD_5V	21	D4_Pi19
22	GND	23	VDD_5V	24	D5_Pi21
25	GND	26	VDD_5V	27	D6_Pi23
28	GND	29	VDD_5V	30	D7_Pi24

18B20 and IR receiver's interface

• 18B20 and IR receiver's pin description

Pin#	Name	Pin#	Name	Pin#	Name
1	VDD_5V	2	DATA	3	GND
1	DATA	2	GND	3	VDD_5V

4 Download Matrix Source Code

All the matrix modules' code samples are open source. They are maintained on GitHub: https://github.com/friendlyarm/matrix.git
Each branch in this hub contains the matrix modules' code samples for a board that the matrix modules can work with

• The matrix-nanopi branch contains the matrix modules' code samples for the NanoPi
• The matrix-nanopi2 branch contains the matrix modules' code samples for the NanoPi 2
• The matrix-tiny4412 branch contains the matrix modules' code samples for the Tiny4412;
• The matrix-raspberrypi branch contains the matrix modules' code samples for the RaspberryPi;

Please follow the steps below to get the source code:
Install the git utility on a PC running Ubuntu14.04

$ sudo apt-get install git

Clone the matrix code from GitHub

$ git clone https://github.com/friendlyarm/matrix.git

If this is successful a "matrix" directory will be generated, which will contain all the matrix modules' code samples.

5 Connect to NanoPi 2

5.1 Hardware Connection

Please refer to the following connection diagram to connect the Matrix-Compact_Kit to the NanoPi 2:

5.2 Compile Test Program

Please login the matrix hub and enter the nanopi2 branch

$ cd matrix
$ git checkout nanopi2

Compile the Matrix code

$ make CROSS_COMPILE=arm-linux- clean
$ make CROSS_COMPILE=arm-linux-
$ make CROSS_COMPILE=arm-linux- install

Note: please make sure to install the cross compiler "arm-linux-gcc-4.9.3" on your PC, which is used to compile files for the NanoPi 2.
Generated library files are under the "install/lib" directory. The test program is under the "install/usr/bin" directory. The modules are under the "modules" directory

5.3 Copy Test Program

Please insert a TF card which is flashed with Debian to a Linux host and mount its boot and rootfs sections.
We assume the rootfs is mounted to /media/rootfs then please run the following commands to copy the module, library and test program to the card

$ cp modules /media/rootfs/ -r
$ cp install/lib/* /media/rootfs/lib/ -d
$ cp install/usr/bin/* /media/rootfs/usr/bin/

5.4 Test LCD

Insert this TF card to your NanoPi 2, power on and run the following commands.

$ cd /modules
$ insmod fbtft_device.ko name=matrix-st7735s gpios=dc:58,reset:63,cs:59
$ sudo FRAMEBUFFER=/dev/fb-st7735s startx &

"fbtft_device" is the LCD's driver.After it is loaded the LCD will be initialized.
"startx" sets the LCD to the output device. Here is what you should expect:

5.5 Test AD

Please run the following command to get Channel 0's value:

$ matrix-adc

When you turn the resistor the AD value will be changing. Here is what you should expect:

5.6 Test Compass

Please run the following command to activate the compass:

$ matrix-compass

When you change the module's directon you will get a changing value. Here is what you should expect:

5.7 Test Key

We took KEY1 as an example. Running the following commands reads its value:

$ cd /sys/class/gpio/
$ echo 71 > export
$ echo in > gpio71/direction
$ cat gpio71/value

After you press KEY1 the value will be 0. After it is released the value will be 1.

5.8 Access LED

We took LED1 as an example. Please run the following commands to access LED1:

$ cd /sys/class/gpio/
$ echo 74 > export
$ echo out > gpio74/direction
$ echo 1 > gpio74/value

1 indicates LED on and 0 indicates LED1 off.

6 Connect to NanoPi

7 与Tiny4412连接使用

8 与RaspberryPi连接使用

9 与Arduino连接使用

10 相关资料

• [Schematic]()