Difference between revisions of "Template:OfficialUbuntuCore"
From FriendlyELEC WiKi
(→Install the kernel-header package) |
(updated by API) |
||
| Line 76: | Line 76: | ||
Set the following kernel modules to be loaded automatically on boot:<br /> | Set the following kernel modules to be loaded automatically on boot:<br /> | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
| − | echo ledtrig-netdev > /etc/ | + | echo ledtrig-netdev > /etc/modules-load.d/ledtrig-netdev.conf |
</syntaxhighlight> | </syntaxhighlight> | ||
Put the following into the autorun script to associate the status leds with the ethernet interface, and you can configure it to behave in other ways by referring to these content:<br /> | Put the following into the autorun script to associate the status leds with the ethernet interface, and you can configure it to behave in other ways by referring to these content:<br /> | ||
| Line 92: | Line 92: | ||
Set the following kernel modules to be loaded automatically on boot:<br /> | Set the following kernel modules to be loaded automatically on boot:<br /> | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
| − | echo ledtrig-netdev > /etc/ | + | echo ledtrig-netdev > /etc/modules-load.d/ledtrig-netdev.conf |
</syntaxhighlight> | </syntaxhighlight> | ||
Put the following into the autorun script to associate the status leds with the ethernet interface, and you can configure it to behave in other ways by referring to these content:<br /> | Put the following into the autorun script to associate the status leds with the ethernet interface, and you can configure it to behave in other ways by referring to these content:<br /> | ||
Revision as of 07:27, 28 September 2022
Contents
1 Work with FriendlyCore
1.1 FriendlyCore User Account
- Non-root User:
User Name: pi Password: pi
- Root:
User Name: root Password: fa
1.2 Update Software Packages
$ sudo apt-get update
1.3 Setup Network Configurations
1.3.1 Set static IP address
By default "eth0" is assigned an IP address obtained via dhcp. If you want to change the setting you need to change the following file:
vi /etc/network/interfaces.d/eth0
For example if you want to assign a static IP to it you can run the following commands:
auto eth0
iface eth0 inet static
address 192.168.1.231
netmask 255.255.255.0
gateway 192.168.1.11.3.2 Set a DNS
You also need to modify the following file to add the DNS configuration:
vi /etc/systemd/resolved.conf
For example, set to 192.168.1.1:
[Resolve] DNS=192.168.1.1
Restart the systemd-resolved service with the following command:
sudo systemctl restart systemd-resolved.service sudo systemctl enable systemd-resolved.service
1.3.3 Set up to use another network interface
To change the setting of "eth1" you can add a new file similar to eth0's configuration file under the /etc/network/interfaces.d/ directory.
1.4 Install the kernel-header package
sudo dpkg -i /opt/linux-headers-*.deb
