Difference between revisions of "Template:OfficialUbuntuCore"
From FriendlyELEC WiKi
(updated by API) |
(updated by API) |
||
| Line 43: | Line 43: | ||
sudo dpkg -i /opt/linux-headers-*.deb | sudo dpkg -i /opt/linux-headers-*.deb | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | |||
<!-- Build kernel header --> | <!-- Build kernel header --> | ||
{{#switch: {{{1}}} | {{#switch: {{{1}}} | ||
| Line 56: | Line 55: | ||
| #default = | | #default = | ||
}} | }} | ||
| − | |||
| − | |||
<!-- LEDs --> | <!-- LEDs --> | ||
{{#switch: {{{1}}} | {{#switch: {{{1}}} | ||
Revision as of 01:31, 24 May 2022
Contents
1 Work with FriendlyCore
1.1 FriendlyCore User Account
- Non-root User:
User Name: pi Password: pi
- Root:
User Name: root Password: fa
1.2 Update Software Packages
$ sudo apt-get update
1.3 Setup Network Configurations
By default "eth0" is assigned an IP address obtained via dhcp. If you want to change the setting you need to change the following file:
vi /etc/network/interfaces.d/eth0
For example if you want to assign a static IP to it you can run the following commands:
auto eth0
iface eth0 inet static
address 192.168.1.231
netmask 255.255.255.0
gateway 192.168.1.1You also need to modify the following file to add the DNS configuration:
vi /etc/systemd/resolved.conf
例如设置为192.168.1.1:
[Resolve] DNS=192.168.1.1
Restart the systemd-resolved service with the following command:
sudo systemctl restart systemd-resolved.service sudo systemctl enable systemd-resolved.service
To change the setting of "eth1" you can add a new file similar to eth0's configuration file under the /etc/network/interfaces.d/ directory.
1.4 Install the kernel-header package
sudo dpkg -i /opt/linux-headers-*.deb
