Difference between revisions of "Template:OfficialUbuntuCore"

Revision as of 10:51, 30 November 2021

   User Name: pi
   Password: pi

   User Name: root
   Password: fa

$ sudo apt-get update

By default "eth0" is assigned an IP address obtained via dhcp. If you want to change the setting you need to change the following file:

vi /etc/network/interfaces.d/eth0

For example if you want to assign a static IP to it you can run the following commands:

auto eth0
iface eth0 inet static
    address 192.168.1.231
    netmask 255.255.255.0
    gateway 192.168.1.1

You also need to modify the following file to add the DNS configuration:

vi /etc/systemd/resolved.conf

例如设置为192.168.1.1:

[Resolve]
DNS=192.168.1.1

Restart the systemd-resolved service with the following command:

sudo systemctl restart systemd-resolved.service
sudo systemctl enable systemd-resolved.service

To change the setting of "eth1" you can add a new file similar to eth0's configuration file under the /etc/network/interfaces.d/ directory.

sudo dpkg -i /opt/linux-headers-*.deb

@@ Line 50: / Line 50: @@
 Please refre to: https://github.com/friendlyarm/sd-fuse_rk3399/blob/kernel-5.10.y/test/test-build-kernel-header-deb.sh <br />
   | NanoPi-R2S
+ | NanoPi-R2C-Plus
   | NanoPi-R2C =
 ===Build kernel-header deb package===
@@ Line 61: / Line 62: @@
   | NanoPi-R4S
   | NanoPi-R2S
+ | NanoPi-R2C-Plus
   | NanoPi-R2C =
   ===Config status LEDs===