Difference between revisions of "NanoPi NEO3"
From FriendlyELEC WiKi
(→Layout) |
(→Layout) |
||
Line 161: | Line 161: | ||
:'''Note:''' | :'''Note:''' | ||
− | ::# For more details refer to the document: [] | + | ::# For more details refer to the document: [http://wiki.friendlyarm.com/wiki/index.php/File:NanoPi-NEO3-2005-Schematic.pdf NanoPi-NEO3-2005-Schematic.pdf] |
===Dimensional Diagram=== | ===Dimensional Diagram=== |
Revision as of 08:35, 28 June 2020
Contents
1 Introduction
- The NanoPi NEO3 is another fun board developed by FriendlyELEC for makers, hobbyists and fans.
2 Hardware Spec
- Soc: RockChip RK3328, Quad-core 64-bit high-performance Cortex A53
- RAM: 1GB/2GB DDR4
- LAN: 10/100/1000M Ethernet with unique MAC
- USB Host: 1x USB3.0 Type A and 2x USB2.0 on 2.54mm pin header
- MicroSD Slot: MicroSD x 1 for system boot and storage
- LED: Power LED x 1, System LED x 1
- Key: User Key x 1
- Fan: 2Pin JST ZH 1.5mm Connector for 5V Fan
- GPIO: 2.54mm pitch 26 pin-header, include I2C, UART, SPI, I2S, GPIO
- Serial Debug Port: 2.54mm pitch 3 pin-header, 115200bps
- Power: 5V/1A, via Type-C or GPIO
- PCB Dimension: 48 x 48mm
- Working Temperature: -20℃ to 70℃
- Weight: 22g
3 Software Features
4 Diagram, Layout and Dimension
4.1 Layout
- GPIO(I2C/UART/SPI/I2S/GPIO)
Pin# Name Linux GPIO Pin# Name Linux GPIO 1 3.3V(OUT) 2 5V(OUT/IN) 3 I2C0_SDA 4 5V(OUT/IN) 5 I2C0_SCL 6 GND 7 GPIO2_A2/IR-RX 66 8 GPIO3_A4/UART1_TX 100 9 GND 10 GPIO3_A6/UART1_RX 102 11 GPIO2_B7/I2S1_MCLK 79 12 GPIO2_C3/I2S1_SDI 83 13 GPIO2_C1/I2S1_LRCK_TX 81 14 GND 15 GPIO2_C2/I2S1_SCLK 82 16 GPIO3_A5/UART1_RTSN 101 17 3.3V(OUT) 18 GPIO3_A7/UART1_CTSN 103 19 GPIO3_A1/SPI_TXD 97 20 GND 21 GPIO3_A2/SPI_RXD 98 22 GPIO2_C7/I2S1_SDO 87 23 GPIO3_A0/SPI_CLK 96 24 GPIO3_B0/SPI_CSN0 104 25 GND 26 GPIO0_D3/SPDIF_TX 27
- USB2.0
Pin# Name Pin# Name 1 GND 2 GND 3 DP1 4 OTG_DP 5 DM1 6 OTG_DM 7 5V 8 5V
- Note:
- For more details refer to the document: NanoPi-NEO3-2005-Schematic.pdf
4.2 Dimensional Diagram
- Refer to the document: [pcb file in dxf format]
5 Software Features
6 Resources
6.1 Schematics and Datasheets
- Schematics
- []
- Dimensional Diagram
- [ pcb file in dxf format]
- RK3328 Datasheet []