Difference between revisions of "Template:RK3399-FriendlyCore-4G-EC20"
From FriendlyELEC WiKi
(updated by API) |
(updated by API) |
||
| Line 99: | Line 99: | ||
[05-15_08:23:15:132] adding dns 120.196.165.7 | [05-15_08:23:15:132] adding dns 120.196.165.7 | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | ==== | + | ====Test 4G connection==== |
Ping a domain name to see if DNS resolution is already working： | Ping a domain name to see if DNS resolution is already working： | ||
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
| Line 110: | Line 110: | ||
64 bytes from 183.232.231.174 (183.232.231.174): icmp_seq=5 ttl=56 time=29.2 ms | 64 bytes from 183.232.231.174 (183.232.231.174): icmp_seq=5 ttl=56 time=29.2 ms | ||
</syntaxhighlight> | </syntaxhighlight> | ||
| − | Test the speed of 4G | + | ====Test the speed of 4G==== |
<syntaxhighlight lang="bash"> | <syntaxhighlight lang="bash"> | ||
wget -O - https://raw.githubusercontent.com/sivel/speedtest-cli/master/speedtest.py | python | wget -O - https://raw.githubusercontent.com/sivel/speedtest-cli/master/speedtest.py | python | ||
Revision as of 08:58, 15 May 2019
Contents
1 Using 4G Module EC20 on FriendlyCore
1.1 Step1：Compile the quectel-CM command line tool on the development board
Compile and install quectel-CM into the /usr/bin/ directory by entering the following command：
git clone https://github.com/friendlyarm/quectel-cm.git cd quectel-cm/ make cp quectel-CM /usr/bin/
1.2 Step2：创建udhcpc script
The quectel-CM tool will call the udhcpc script. we need to create a udhcpc script for it. Please create a new file with the editor you are familiar with. The file name is: / Usr/share/udhcpc/default.script, the content is as follows：
#!/bin/sh # udhcpc script edited by Tim Riker <Tim@Rikers.org> [ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1 RESOLV_CONF="/etc/resolv.conf" [ -n "$broadcast" ] && BROADCAST="broadcast $broadcast" [ -n "$subnet" ] && NETMASK="netmask $subnet" case "$1" in deconfig) /sbin/ifconfig $interface 0.0.0.0 ;; renew|bound) /sbin/ifconfig $interface $ip $BROADCAST $NETMASK if [ -n "$router" ] ; then echo "deleting routers" while route del default gw 0.0.0.0 dev $interface ; do : done for i in $router ; do route add default gw $i dev $interface done fi echo -n > $RESOLV_CONF [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF for i in $dns ; do echo adding dns $i echo nameserver $i >> $RESOLV_CONF done ;; esac exit 0
Assign executable permissions with the following command：
chmod 755 /usr/share/udhcpc/default.script
1.3 Step3：Start 4G dialing
Start the dialing by entering the following command:
quectel-CM &If the dialing is successful, the screen will output information such as the IP address, as shown below:
root@NanoPC-T4:~# quectel-CM & [1] 5364 root@NanoPC-T4:~# [05-15_08:23:13:719] WCDMA<E_QConnectManager_Linux&Android_V1.1.34 [05-15_08:23:13:720] quectel-CM profile[1] = (null)/(null)/(null)/0, pincode = (null) [05-15_08:23:13:721] Find /sys/bus/usb/devices/3-1 idVendor=2c7c idProduct=0125 [05-15_08:23:13:722] Find /sys/bus/usb/devices/3-1:1.4/net/wwan0 [05-15_08:23:13:722] Find usbnet_adapter = wwan0 [05-15_08:23:13:723] Find /sys/bus/usb/devices/3-1:1.4/usbmisc/cdc-wdm0 [05-15_08:23:13:723] Find qmichannel = /dev/cdc-wdm0 [05-15_08:23:13:739] cdc_wdm_fd = 7 [05-15_08:23:13:819] Get clientWDS = 18 [05-15_08:23:13:851] Get clientDMS = 2 [05-15_08:23:13:884] Get clientNAS = 2 [05-15_08:23:13:915] Get clientUIM = 1 [05-15_08:23:13:947] Get clientWDA = 1 [05-15_08:23:13:979] requestBaseBandVersion EC20CEFHLGR06A01M1G_OCPU_BETA1210 [05-15_08:23:14:043] requestSetEthMode QMUXResult = 0x1, QMUXError = 0x46 [05-15_08:23:14:075] requestGetSIMStatus SIMStatus: SIM_READY [05-15_08:23:14:107] requestGetProfile[1] cmnet///0 [05-15_08:23:14:139] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: LTE [05-15_08:23:14:171] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED [05-15_08:23:14:235] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: LTE [05-15_08:23:14:938] requestSetupDataCall WdsConnectionIPv4Handle: 0xe16e4540 [05-15_08:23:15:002] requestQueryDataCall IPv4ConnectionStatus: CONNECTED [05-15_08:23:15:036] ifconfig wwan0 up [05-15_08:23:15:052] busybox udhcpc -f -n -q -t 5 -i wwan0 [05-15_08:23:15:062] udhcpc (v1.23.2) started [05-15_08:23:15:077] Sending discover... [05-15_08:23:15:093] Sending select for 10.22.195.252... [05-15_08:23:15:105] Lease of 10.22.195.252 obtained, lease time 7200 [05-15_08:23:15:118] deleting routers SIOCDELRT: No such process [05-15_08:23:15:132] adding dns 221.179.38.7 [05-15_08:23:15:132] adding dns 120.196.165.7
1.4 Test 4G connection
Ping a domain name to see if DNS resolution is already working：
root@NanoPC-T4:~# ping www.baidu.com PING www.a.shifen.com (183.232.231.174) 56(84) bytes of data. 64 bytes from 183.232.231.174 (183.232.231.174): icmp_seq=1 ttl=56 time=74.3 ms 64 bytes from 183.232.231.174 (183.232.231.174): icmp_seq=2 ttl=56 time=25.1 ms 64 bytes from 183.232.231.174 (183.232.231.174): icmp_seq=3 ttl=56 time=30.8 ms 64 bytes from 183.232.231.174 (183.232.231.174): icmp_seq=4 ttl=56 time=29.1 ms 64 bytes from 183.232.231.174 (183.232.231.174): icmp_seq=5 ttl=56 time=29.2 ms
1.5 Test the speed of 4G
wget -O - https://raw.githubusercontent.com/sivel/speedtest-cli/master/speedtest.py | python
The test results obtained are as follows：
Retrieving speedtest.net configuration... Testing from China Mobile Guangdong (117.136.40.167)... Retrieving speedtest.net server list... Selecting best server based on ping... Hosted by ChinaTelecom-GZ (Guangzhou) [2.51 km]: 62.726 ms Testing download speed................................................................................ Download: 32.93 Mbit/s Testing upload speed................................................................................................ Upload: 5.58 Mbit/s
