Difference between revisions of "GPIO"
From FriendlyELEC WiKi
(updated by API) |
(updated by API) |
||
| Line 28: | Line 28: | ||
</syntaxhighlight> | </syntaxhighlight> | ||
The difference between each group is 32, which is checked by the cat gpiochip0/ngpio command. | The difference between each group is 32, which is checked by the cat gpiochip0/ngpio command. | ||
| + | |||
| + | ===RK3399 GPIO pin definition=== | ||
| + | Use the following command to see the GPIO pins.<br /> | ||
| + | <syntaxhighlight lang="bash"> | ||
| + | cat /sys/kernel/debug/gpio | ||
| + | </syntaxhighlight> | ||
| + | Output on T4: | ||
| + | <syntaxhighlight lang="bash"> | ||
| + | GPIOs 0-31, platform/pinctrl, gpio0: | ||
| + | gpio-1 ( |vcc_sd ) out lo | ||
| + | gpio-4 ( |bt_default_wake_host) out hi | ||
| + | gpio-5 ( |GPIO Key Power ) in hi | ||
| + | gpio-9 ( |bt_default_reset ) out hi | ||
| + | gpio-10 ( |reset ) out hi | ||
| + | gpio-13 ( |? ) out hi | ||
| + | GPIOs 32-63, platform/pinctrl, gpio1: | ||
| + | gpio-34 ( |int-n ) in hi | ||
| + | gpio-46 ( |vsel ) out lo | ||
| + | gpio-49 ( |vsel ) out lo | ||
| + | GPIOs 64-95, platform/pinctrl, gpio2: | ||
| + | gpio-83 ( |bt_default_rts ) out lo | ||
| + | gpio-90 ( |bt_default_wake ) out hi | ||
| + | GPIOs 96-127, platform/pinctrl, gpio3: | ||
| + | gpio-111 ( |mdio-reset ) out hi | ||
| + | GPIOs 128-159, platform/pinctrl, gpio4: | ||
| + | gpio-154 ( |vbus-5v ) out lo | ||
| + | gpio-156 ( |Headphone detection ) in lo | ||
| + | gpio-157 ( |enable ) out lo | ||
| + | gpio-158 ( |vcc_lcd ) out hi | ||
| + | </syntaxhighlight> | ||
| + | Take GPIO4_C6 as an example, since gpio4 is 128, According to:<br/> | ||
| + | a = 1<br/> | ||
| + | b = 2<br/> | ||
| + | c = 3<br/> | ||
| + | d = 4<br/> | ||
| + | So GPIO4_C6 is 128 + (3-1)*8 + 6 = 128+16+6 = 150。<br/> | ||
| + | Some examples of conversion of pin index numbers： | ||
| + | <syntaxhighlight lang="bash"> | ||
| + | GPIO4_C6 128+(3-1)*8+6 = 150 | ||
| + | GPIO4_C1 128+(3-1)*8+1 = 145 | ||
| + | GPIO4_C0 128+(3-1)*8+0 = 144 | ||
| + | GPIO1_C2 32+(3-1)*8+2 = 50 | ||
| + | GPIO1_C7 32+(3-1)*8+7 = 55 | ||
| + | GPIO3_D4 96+(4-1)*8+4 = 124 | ||
| + | GPIO3_D5 96+(4-1)*8+5 = 125 | ||
| + | GPIO3_D6 96+(4-1)*8+6 = 126 | ||
| + | </syntaxhighlight> | ||
Revision as of 04:54, 20 March 2019
1 S5P4418/S5P6818 GPIO pin definition
See pin definition, total GPIOA ~ GPIOD 4 group，
Use the following command to see the GPIO pins.
#/bin/sh cd /sys/class/gpio for i in gpiochip* ; do echo `cat $i/label`: `cat $i/base` ; done
Output on T2:
nxp-gpio.0: 0 nxp-gpio.4: 128 nxp-gpio.5: 160 nxp-gpio.1: 32 nxp-gpio.2: 64 nxp-gpio.3: 96
Each label represents a group, and the above shows 6 groups.
Then the corresponding is:
nxp-gpio.0: 0 -> GPIOA nxp-gpio.4: 128 -> GPIOE ->AliveGPIO3 nxp-gpio.5: 160 -> GPIOF ->AliveGPIO5 nxp-gpio.1: 32 -> GPIOB nxp-gpio.2: 64 -> GPIOC nxp-gpio.3: 96 -> GPIOD
The difference between each group is 32, which is checked by the cat gpiochip0/ngpio command.
2 RK3399 GPIO pin definition
Use the following command to see the GPIO pins.
cat /sys/kernel/debug/gpio
Output on T4:
GPIOs 0-31, platform/pinctrl, gpio0: gpio-1 ( |vcc_sd ) out lo gpio-4 ( |bt_default_wake_host) out hi gpio-5 ( |GPIO Key Power ) in hi gpio-9 ( |bt_default_reset ) out hi gpio-10 ( |reset ) out hi gpio-13 ( |? ) out hi GPIOs 32-63, platform/pinctrl, gpio1: gpio-34 ( |int-n ) in hi gpio-46 ( |vsel ) out lo gpio-49 ( |vsel ) out lo GPIOs 64-95, platform/pinctrl, gpio2: gpio-83 ( |bt_default_rts ) out lo gpio-90 ( |bt_default_wake ) out hi GPIOs 96-127, platform/pinctrl, gpio3: gpio-111 ( |mdio-reset ) out hi GPIOs 128-159, platform/pinctrl, gpio4: gpio-154 ( |vbus-5v ) out lo gpio-156 ( |Headphone detection ) in lo gpio-157 ( |enable ) out lo gpio-158 ( |vcc_lcd ) out hi
Take GPIO4_C6 as an example, since gpio4 is 128, According to:
a = 1
b = 2
c = 3
d = 4
So GPIO4_C6 is 128 + (3-1)*8 + 6 = 128+16+6 = 150。
Some examples of conversion of pin index numbers：
GPIO4_C6 128+(3-1)*8+6 = 150 GPIO4_C1 128+(3-1)*8+1 = 145 GPIO4_C0 128+(3-1)*8+0 = 144 GPIO1_C2 32+(3-1)*8+2 = 50 GPIO1_C7 32+(3-1)*8+7 = 55 GPIO3_D4 96+(4-1)*8+4 = 124 GPIO3_D5 96+(4-1)*8+5 = 125 GPIO3_D6 96+(4-1)*8+6 = 126
