Difference between revisions of "NanoPi M4 SATA HAT"
From FriendlyELEC WiKi
(Created page with "==Spec== * '''SATA''' ** Four Sata Ports, Supports communication speeds of 6 Gbps, 3 Gbps, and 1.5 Gbps ** One 4-Pin power connector, include 12V and 5V output, which is able...") |
(→Spec) |
||
| Line 10: | Line 10: | ||
* '''USB''' | * '''USB''' | ||
** Two 4-PIN PH2.0 USB 2.0 host connector | ** Two 4-PIN PH2.0 USB 2.0 host connector | ||
| − | * Heat dissipation | + | * '''Heat dissipation''' |
** Two PCB nuts for mounting heatsink above the PCIe to SATA brigde | ** Two PCB nuts for mounting heatsink above the PCIe to SATA brigde | ||
** One 2-PIN PH2.0 connector for fan. 12V output and modulated by PWM1 | ** One 2-PIN PH2.0 connector for fan. 12V output and modulated by PWM1 | ||
Revision as of 03:33, 29 January 2019
Spec
- SATA
- Four Sata Ports, Supports communication speeds of 6 Gbps, 3 Gbps, and 1.5 Gbps
- One 4-Pin power connector, include 12V and 5V output, which is able to carry large current
- Four LEDs for Indicating status of each Sata Port
- Power
- Two 12V Power Input options, include one DC-Jack and one 5566-04A Connector
- Output current of 12V to 5V DC/DC regulator is up to 8A
- One PowerKey button and PowerKey jumper
- USB
- Two 4-PIN PH2.0 USB 2.0 host connector
- Heat dissipation
- Two PCB nuts for mounting heatsink above the PCIe to SATA brigde
- One 2-PIN PH2.0 connector for fan. 12V output and modulated by PWM1
