Difference between revisions of "Smart4418 SDK"

Latest revision as of 04:19, 26 May 2020

查看中文

1 Introduction

Overview

Front

• The Smart4418 SDK carrier board V1606 has various interfaces and ports like HDMI port, USB host, SD card slot, DB9 serial port, RJ-45 Ethernet port, 3.5mm audio jack, SATA interface, MiniPCIe, MicroSIM etc with support for 3G/4G Bluetooth & WiFi.In addition it has hardware resources like buzzer, user keys, RTC battery, microphone and etc for users to evaluate its performance and features. FriendlyARM designed it for sake of industrial applications by putting all commonly used interfaces and ports on one side with mounting holes for easy deployment.
• To make this carrier board applicable in various applications compared to our existing carrier boards we add more interfaces and ports such as DVP camera interface, SPI, GPIO, I2C, AP6212 WiFi & Bluetooth module, porcelain antenna, RTC seat and etc.

2 Features

Features

SDK Carrier Board Model	Smart4418SDK 1606
Dimension	189.8 x 118.2(mm)
Applicable CPU Board	Smart4418
WiFi/Bluetooth	Onboard WiFi & Bluetooth
MiniPCIe Interface	For 4G modules, data service only, speech service not applicable
SIM Card Slot	Pop-up MicroSIM card slot
Antenna	Onboard porcelain antenna
DVP Camera Interface	24pin, 0.5mm pitch FPC seat DVP Camera interface, ITU-R BT 601/656 8-bit
HDMI Interface	1 x HDMI A Type, HDMI 1.4a (Smart4418) 1080p30 video output
RS232 Serial Interface	2 x 3-wire serial port (UART0 and 3), DB9 male connector
USB Host	2 x USB A brought out from USB 2.0 hub, (USB 1.1 compatible)
USB Slave	1 x Micro USB, data communication only
Audio Interface	Internal Audio supports audio recording and play 3.5mm audio jack and MIC onboard Microphone
Ethernet	Internal 1000/100/10M Ethernet
User Key	PWRKEY (power key) RST (reset) K1/K2/K3 programmable keys
LED	2 x GPIO LED (On Smart4418 CPU board)
RTC	Onboard RTC battery(CR1220)
Buzzer	1 x PWM buzzer
SPI Interface	CON3: 26pin ,2.54mm pitch double row pin-header
GPIO Header	GPIOC9, GPIOC10, GPIOC11 and GPIOC12
SD Card Slot	Pop-up SD card slot
I2C Interface	I2C0
UART Serial Interface	UART2
SATA	Onboard SATA interface
SATA Power	Onboard SATA power interface
LCD Interface	LCD Interface(45pin, 0.5mm pitch FPC seat) Supports FriendlyARM one wire technology back-light adjustable Supports LCDs with capacitive touch Supports RGB888 Supports full color TFT CD
LCD Mounting Holes	Applicable for X710 LCD
LVDS Interface	2pin, 2.0mm pitch
GPIO Pin-header	30pin 2.0mm pitch double-row pin-header including 1x UART, 1x I2C, 1 x SPI, 1 x SDIO and 11 x GPIO
Other Resources	1 x EEPROM, 1 x 3-Axis Digital Accelerometer
Power	DC 9V~24V/2A. When you connect a SATA hard disk or LVDS LCD to it a 12V/3A power adapter is required

3 Diagram, Layout and Dimension

3.1 Pin Descriptions

• 26Pin UART/SPI/I2C/PWM Interface

Pin#	Name	Pin#	Name
1	VDD_3.3V	2	VDD_5V
3	I2C0_SDA	4	VDD_5V
5	I2C0_SCL	6	DGND
7	NC	8	UART3_TX
9	DGND	10	UART3_RX
11	NC	12	GPIOD1/PWM0
13	NC	14	DGND
15	NC	16	GPIOC13/PWM1
17	VDD_3.3V	18	NC
19	SPI0_MOSI/GPIOC31	20	DGND
21	SPI0_MISO/GPIOD0	22	NC
23	SPI0_CLK/GPIOC29	24	SPI0_CS/GPIOC30
25	DGND	26	NC

• LVDS Interface

Pin#	Name	Pin#	Name
1	SYS_3.3V	2	SYS_3.3V
3	GPIOC16	4	GPIOB18
5	DGND	6	DGND
7	LVDS_D0-	8	LVDS_D0+
9	LVDS_D1-	10	LVDS_D1+
11	LVDS_D2-	12	LVDS_D2+
13	DGND	14	DGND
15	LVDS_CLK-	16	LVDS_CLK+
17	LVDS_D3-	18	LVDS_D3+
19	I2C2_SCL	20	I2C2_SDA

• DVP Camera Interface

Pin#	Name
1, 2	SYS_3.3V
7,9,13,15,24	DGND
3	I2C0_SCL
4	I2C0_SDA
5	GPIOB14
6	GPIOB16
8,10	NC
11	VSYNC
12	HREF
14	PCLK
16-23	Data bit7-0

• LCD Interface

Pin#	Name	Description
1, 2	VDD_5V	5V Output, it can be used to power LCD modules
11，20，29, 37，38，39，40, 45	DGND	Ground
3-10	Blue LSB to MSB	RGB blue
12-19	Green LSB to MSB	RGB green
21-28	Red LSB to MSB	RGB red
30	GPIOB25	available for users
31	GPIOC15	occupied by FriendlyARM one wire technology to recognize LCD models and control backlight and implement resistive touch, not applicable for users
32	XnRSTOUT Form CPU	low when system is reset
33	VDEN	signal the external LCD that data is valid on the data bus
34	VSYNC	vertical synchronization
35	HSYNC	horizontal synchronization
36	LCDCLK	LCD clock, Pixel frequency
41	I2C2_SCL	I2C2 clock signal, for capacitive touch data transmission
42	I2C2_SDA	I2C2 data signal, for capacitive touch data transmission
43	GPIOC16	interrupt pin for capacitive touch, used with I2C2
44	NC	Not connected

• SATA Interface

• Standard 7Pin Data Interface, 4Pin Power Interface

• Power Interface

• DC power jack, applicable for DC 5.5 * 2.1mm power jack, DC 9V~24V/2A. When you connect a SATA hard disk or LVDS LCD to it a 12V/3A power adapter is required

• 2.54mm pitch, 2510-4P pin-header, Pin1~Pin4 description: VDD_12V, DGND, DGND, 12V_IN
  Pin 12V_IN is connected to DC power jack, VDD_12V is connected to 12V_IN through the S1 switch

3.2 Dimensional Diagram

For more details refer to :dxf file

4 Resources

SDK Carrier Board Hardware Technical Documents

PCB source files, Allegro 16.5 or above

PCB dxf file

schematics, OrCAD 16.5 or above

schematics in pdf

Smart4418 CPU board wiki

Smart4418 CPU board schematics in pdf

5 Update Log

5.1 August-02-2016

• Released English version

5.2 Dec-08-2016

• Updated Section 2