Difference between revisions of "NanoPi M4 SATA HAT"
From FriendlyELEC WiKi
(→Block) |
|||
| (10 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Features== | ==Features== | ||
| − | [[File: | + | [[File:M4_SATA_HAT_layout.jpg||thumb|Back]] |
| − | + | ||
| − | + | ||
* '''SATA''' | * '''SATA''' | ||
| + | ** Use Marvell 88SE9215 Four-Port 6 Gbps SATA I/O Controller | ||
** Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps | ** Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps | ||
** One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents | ** One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents | ||
** Four LEDs for indicating the status of each sata port | ** Four LEDs for indicating the status of each sata port | ||
* '''Power''' | * '''Power''' | ||
| − | ** Two 12V Power Input options. It includes a DC-Jack and a 5566-04A connector | + | ** Two 12V Power Input options. It includes a 5.5*2.1mm DC-Jack and a 5566-04A connector |
** The output current of the 12V to 5V DC/DC regulator is up to 8A | ** The output current of the 12V to 5V DC/DC regulator is up to 8A | ||
** One PowerKey button and PowerKey jumper | ** One PowerKey button and PowerKey jumper | ||
| Line 18: | Line 17: | ||
* '''GPIO''' | * '''GPIO''' | ||
** ALL the signals of the NanoPi M4's 40-PIN connector are populated | ** ALL the signals of the NanoPi M4's 40-PIN connector are populated | ||
| + | * '''About Power Supply''' | ||
| + | ** To drive one or two hard disk, We recommend our 12V 2A Universal Power Adapter https://www.friendlyarm.com/index.php?route=product/product&path=73&product_id=233 | ||
| + | ** To drive four hard disk, We recommend PC Power | ||
| + | |||
| + | [[File:NanoPi_M4_SATA_HAT-01B.jpg||thumb|Overview]][[File:NanoPi_M4_SATA_HAT-A01.jpg||thumb|Front]][[File:NanoPi_M4_SATA_HAT-B01.jpg||thumb|Back]] | ||
| + | |||
| + | ==Block== | ||
| + | [[File:M4_SATA_HAT_Block.jpg|600px]] | ||
| + | |||
| + | ==Resources== | ||
| + | * 2D CAD file [http://wiki.friendlyarm.com/wiki/images/3/32/M4_SATA_HAT_2D_DWG.zip M4_SATA_HAT_2D_DWG.zip] | ||
Latest revision as of 08:56, 14 June 2019
1 Features
- SATA
- Use Marvell 88SE9215 Four-Port 6 Gbps SATA I/O Controller
- Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps
- One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents
- Four LEDs for indicating the status of each sata port
- Power
- Two 12V Power Input options. It includes a 5.5*2.1mm DC-Jack and a 5566-04A connector
- The output current of the 12V to 5V DC/DC regulator is up to 8A
- One PowerKey button and PowerKey jumper
- USB
- Two 4-PIN PH2.0 USB 2.0 host connectors.
- Heat dissipation
- Two PCB nuts for mounting a heatsink above the PCIe to SATA brigde
- One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
- GPIO
- ALL the signals of the NanoPi M4's 40-PIN connector are populated
- About Power Supply
- To drive one or two hard disk, We recommend our 12V 2A Universal Power Adapter https://www.friendlyarm.com/index.php?route=product/product&path=73&product_id=233
- To drive four hard disk, We recommend PC Power
2 Block
3 Resources
- 2D CAD file M4_SATA_HAT_2D_DWG.zip
