Difference between revisions of "NanoPi M4 SATA HAT"
From FriendlyELEC WiKi
(→Overview) |
(→Block) |
||
| (15 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
| − | |||
| − | |||
| − | |||
==Features== | ==Features== | ||
| + | [[File:M4_SATA_HAT_layout.jpg||thumb|Back]] | ||
* '''SATA''' | * '''SATA''' | ||
| − | ** Four Sata Ports | + | ** Use Marvell 88SE9215 Four-Port 6 Gbps SATA I/O Controller |
| − | ** One 4-Pin power connector | + | ** Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps |
| − | ** Four LEDs for | + | ** One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents |
| + | ** Four LEDs for indicating the status of each sata port | ||
* '''Power''' | * '''Power''' | ||
| − | ** Two 12V Power Input options | + | ** Two 12V Power Input options. It includes a 5.5*2.1mm DC-Jack and a 5566-04A connector |
| − | ** | + | ** The output current of the 12V to 5V DC/DC regulator is up to 8A |
** One PowerKey button and PowerKey jumper | ** One PowerKey button and PowerKey jumper | ||
* '''USB''' | * '''USB''' | ||
| − | ** Two 4-PIN PH2.0 USB 2.0 host | + | ** Two 4-PIN PH2.0 USB 2.0 host connectors. |
* '''Heat dissipation''' | * '''Heat dissipation''' | ||
| − | ** Two PCB nuts for mounting heatsink above the PCIe to SATA brigde | + | ** Two PCB nuts for mounting a heatsink above the PCIe to SATA brigde |
| − | ** One 2-PIN PH2.0 connector for fan. 12V output | + | ** One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1 |
| + | * '''GPIO''' | ||
| + | ** ALL the signals of the NanoPi M4's 40-PIN connector are populated | ||
| + | * '''About Power Supply''' | ||
| + | ** To drive one or two hard disk, We recommend our 12V 2A Universal Power Adapter https://www.friendlyarm.com/index.php?route=product/product&path=73&product_id=233 | ||
| + | ** To drive four hard disk, We recommend PC Power | ||
| + | |||
| + | [[File:NanoPi_M4_SATA_HAT-01B.jpg||thumb|Overview]][[File:NanoPi_M4_SATA_HAT-A01.jpg||thumb|Front]][[File:NanoPi_M4_SATA_HAT-B01.jpg||thumb|Back]] | ||
| + | |||
| + | ==Block== | ||
| + | [[File:M4_SATA_HAT_Block.jpg|600px]] | ||
| + | |||
| + | ==Resources== | ||
| + | * 2D CAD file [http://wiki.friendlyarm.com/wiki/images/3/32/M4_SATA_HAT_2D_DWG.zip M4_SATA_HAT_2D_DWG.zip] | ||
Latest revision as of 08:56, 14 June 2019
1 Features
- SATA
- Use Marvell 88SE9215 Four-Port 6 Gbps SATA I/O Controller
- Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps
- One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents
- Four LEDs for indicating the status of each sata port
- Power
- Two 12V Power Input options. It includes a 5.5*2.1mm DC-Jack and a 5566-04A connector
- The output current of the 12V to 5V DC/DC regulator is up to 8A
- One PowerKey button and PowerKey jumper
- USB
- Two 4-PIN PH2.0 USB 2.0 host connectors.
- Heat dissipation
- Two PCB nuts for mounting a heatsink above the PCIe to SATA brigde
- One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
- GPIO
- ALL the signals of the NanoPi M4's 40-PIN connector are populated
- About Power Supply
- To drive one or two hard disk, We recommend our 12V 2A Universal Power Adapter https://www.friendlyarm.com/index.php?route=product/product&path=73&product_id=233
- To drive four hard disk, We recommend PC Power
2 Block
3 Resources
- 2D CAD file M4_SATA_HAT_2D_DWG.zip
