Difference between revisions of "Matrix - MCAM400"
From FriendlyELEC WiKi
(→Lens Spec) |
(→Lens Spec) |
||
(4 intermediate revisions by the same user not shown) | |||
Line 26: | Line 26: | ||
==Lens Spec== | ==Lens Spec== | ||
− | * | + | *'''5MP Fixed Lens with IR Filter''' |
** Focal Length (EFL): 3.3 mm | ** Focal Length (EFL): 3.3 mm | ||
** Fno: 2.2 | ** Fno: 2.2 | ||
Line 37: | Line 37: | ||
** Thread Size:M12x0.5 | ** Thread Size:M12x0.5 | ||
** Barrel Material: Aluminium Alloy | ** Barrel Material: Aluminium Alloy | ||
− | *IR | + | |
− | ** Focal Length (EFL): 3. | + | *'''5MP Fixed Lens without IR Filter''' |
− | ** Fno: 2. | + | ** Focal Length (EFL): 3.6 mm |
− | ** MAX FOV D/H/V: | + | ** Fno: 2.0 |
− | ** FBL and BFL: | + | ** MAX FOV D/H/V: 132℃/102℃/76℃ |
+ | ** FBL and BFL: 7.67mm, 5mm | ||
** TTL: 21.5mm | ** TTL: 21.5mm | ||
− | ** TV Distortion : < - | + | ** TV Distortion : < -35% |
− | ** Optical Structure: | + | ** Optical Structure: 5x6G |
− | + | ||
** Thread Size:M12x0.5 | ** Thread Size:M12x0.5 | ||
** Barrel Material: Aluminium Alloy | ** Barrel Material: Aluminium Alloy |
Latest revision as of 07:39, 29 January 2019
Contents
1 Introduction
- The MCAM400 module uses Omni Vision's 4MP CMOS OV4689 image sensor. It has MIPI output interface and supports up to 2688 x 1520 photographing and 1920x1080@120fps video recording.
2 Features
- Omnivision OV4689 4M pixels Sensor
- 4-lane MIPI interface
- M12 lens
- Build in IR Cut-Off filter motor driver
- Module Size: 38mm x 38mm
3 Sensor Spec
- Sensor size: 1/3"
- Active pixels: 2688H x 1520V
- Pixel size: 2.0 um x 2.0 um
- Output format: 10-bit RAW RGB
- Max S/N ratio: 38.3dB
- Dynamic range:64.6dB@1xgain
- Sensitivity: 1900mv/lux-sec
- Temperature range:
- operating: -30℃ to +85℃ junction temperature
- stable image: 0℃ to +60℃ junction temperature
4 Lens Spec
- 5MP Fixed Lens with IR Filter
- Focal Length (EFL): 3.3 mm
- Fno: 2.2
- MAX FOV D/H/V: 135℃/110℃/80℃
- FBL and BFL: 4.28mm, 4.38mm
- TTL: 21.5mm
- TV Distortion : < -15%
- Optical Structure: 4G+IR CUT
- Wavelength:400nm-650nm
- Thread Size:M12x0.5
- Barrel Material: Aluminium Alloy
- 5MP Fixed Lens without IR Filter
- Focal Length (EFL): 3.6 mm
- Fno: 2.0
- MAX FOV D/H/V: 132℃/102℃/76℃
- FBL and BFL: 7.67mm, 5mm
- TTL: 21.5mm
- TV Distortion : < -35%
- Optical Structure: 5x6G
- Thread Size:M12x0.5
- Barrel Material: Aluminium Alloy
5 Drawing
6 MIPI interface Pin Spec
Connector type : 0.5mm pitch FPC
Pin# Name Description 1 VDD_5V 5V Power input, 3.6V to 5.5V 2 VDD_5V 5V Power input, 3.6V to 5.5V 3 GND Return current path 4 /NC no connection 5 /NC no connection 6 VCC_IO power and reference level for I2C, PWDN, XSHUTDOWN circuit, typical 1.8V 7 /NC no connection 8 /NC no connection 9 I2C_SCL I2C clock signal 10 I2C_SDA I2C data signal 11 XSHUTDOWN XSHUTDOWN signal of OV4689 , connect to GPIO 12 /NC no connection 13 GND Return current path 14 EXTCLK EXTCLK to OV4689 15 GND Return current path 16 MIPI_D3P MIPI TX data lane 3 positive output 17 MIPI_D3N MIPI TX data lane 3 negative output 18 GND Return current path 19 MIPI_D2P MIPI TX data lane 2 positive output 20 MIPI_D2N MIPI TX data lane 2 negative output 21 GND Return current path 22 MIPI_D1P MIPI TX data lane 1 positive output 23 MIPI_D1N MIPI TX data lane 1 negative output 24 GND Return current path 25 MIPI_CLKP MIPI TX clock lane positive output 26 MIPI_CLKN MIPI TX clock lane negative output 27 GND Return current path 28 MIPI_D0P MIPI TX data lane 0 positive output 29 MIPI_D0N MIPI TX data lane 0 negative output 30 GND Return current path
7 IR Cut-Off filter motor driver
- 3.3V,300mA, the circuit is show as below
8 Resources
- 3D model MCAM400_3D_step.zip