Difference between revisions of "BakeBit - Button/zh"
From FriendlyELEC WiKi
(→硬件连接) |
(→硬件连接) |
||
| Line 25: | Line 25: | ||
|SIG || 信号 | |SIG || 信号 | ||
|} | |} | ||
| − | ==硬件连接== | + | == 示例程序：Button And Buzzer == |
| + | |||
| + | 本示例需要配合蜂鸣器使用，当按下按键时，蜂鸣器会响起，松开按键时，蜂鸣器停止。 | ||
| + | |||
| + | === 硬件连接 === | ||
简单的将 蜂鸣器 模块插入 D3接口，将 按键 插入 D4 接口，如下面这样： | 简单的将 蜂鸣器 模块插入 D3接口，将 按键 插入 D4 接口，如下面这样： | ||
| Line 33: | Line 37: | ||
|- | |- | ||
|} | |} | ||
| + | |||
| + | === 示例源代码 === | ||
| + | |||
| + | <syntaxhighlight lang="python"> | ||
| + | import bakebit | ||
| + | import time | ||
| + | # Connect the BakeBit Ultrasonic Ranger to digital port D4 | ||
| + | # SIG,NC,VCC,GND | ||
| + | ultrasonic_ranger = 4 | ||
| + | |||
| + | # Connect the BakeBit LED to digital port D3 | ||
| + | led = 3 | ||
| + | |||
| + | bakebit.pinMode(led,"OUTPUT") | ||
| + | light = 0 | ||
| + | |||
| + | while True: | ||
| + | try: | ||
| + | # Read distance value from Ultrasonic | ||
| + | distance = bakebit.ultrasonicRead(ultrasonic_ranger) | ||
| + | print(distance) | ||
| + | if distance > 0: | ||
| + | if distance<10: | ||
| + | if light == 0: | ||
| + | print("\ton") | ||
| + | bakebit.digitalWrite(led,1) | ||
| + | light = 1 | ||
| + | else: | ||
| + | if light == 1: | ||
| + | print("\toff") | ||
| + | bakebit.digitalWrite(led,0) | ||
| + | light = 0 | ||
| + | time.sleep(.2) | ||
| + | |||
| + | except KeyboardInterrupt: | ||
| + | bakebit.digitalWrite(led,0) | ||
| + | break | ||
| + | |||
| + | except TypeError: | ||
| + | print ("Error") | ||
| + | except IOError: | ||
| + | print ("Error") | ||
| + | </syntaxhighlight> | ||
| + | |||
| + | |||
| + | === 运行示例 === | ||
| + | |||
| + | 假设你已经参考[http://wiki.friendlyarm.com/bakebit bakebit教程]安装了BakeBit源代码，<br /> | ||
| + | 要运行示例程序，可以在开发板上进入 BakeBit/Software/Python目录,运行bakebit_prj_Button_And_Buzzer.py: | ||
| + | <syntaxhighlight lang="bash"> | ||
| + | cd ~/BakeBit/Software/Python | ||
| + | sudo python bakebit_prj_Button_And_Buzzer.py | ||
| + | </syntaxhighlight> | ||
==示例程序== | ==示例程序== | ||
Revision as of 09:13, 25 November 2016
1 介绍
- BakeBit - Button是一个瞬时（非自锁）按钮开关模块，用于检测按键事件，按钮被释放后自动恢复到常态。
- 在按钮未被按下时模块输出高电平，按钮被按下后输出低电平。
2 特性
- 使用标准的2.0mm 4 Pin BakeBit接口
- 数字信号输出
- PCB尺寸（mm）：20x24
- 引脚说明:
| 名称 | 描述 |
| GND | 地 |
| 5V | 电源5V |
| NC | 空 |
| SIG | 信号 |
3 示例程序：Button And Buzzer
本示例需要配合蜂鸣器使用，当按下按键时，蜂鸣器会响起，松开按键时，蜂鸣器停止。
3.1 硬件连接
简单的将 蜂鸣器 模块插入 D3接口，将 按键 插入 D4 接口，如下面这样：
BakeBit-Button
3.2 示例源代码
import bakebit import time # Connect the BakeBit Ultrasonic Ranger to digital port D4 # SIG,NC,VCC,GND ultrasonic_ranger = 4 # Connect the BakeBit LED to digital port D3 led = 3 bakebit.pinMode(led,"OUTPUT") light = 0 while True: try: # Read distance value from Ultrasonic distance = bakebit.ultrasonicRead(ultrasonic_ranger) print(distance) if distance > 0: if distance<10: if light == 0: print("\ton") bakebit.digitalWrite(led,1) light = 1 else: if light == 1: print("\toff") bakebit.digitalWrite(led,0) light = 0 time.sleep(.2) except KeyboardInterrupt: bakebit.digitalWrite(led,0) break except TypeError: print ("Error") except IOError: print ("Error")
3.3 运行示例
假设你已经参考bakebit教程安装了BakeBit源代码，
要运行示例程序，可以在开发板上进入 BakeBit/Software/Python目录,运行bakebit_prj_Button_And_Buzzer.py:
cd ~/BakeBit/Software/Python sudo python bakebit_prj_Button_And_Buzzer.py
4 示例程序
下面是一个简单的BakeBit - Button模块的例子，当没有按键按下时，输出为1，当有按键按下时，输出为0.
import time import bakebit # Connect the BakeBit Button to digital port D3 # SIG,NC,VCC,GND button = 3 bakebit.pinMode(button,"INPUT") while True: try: print(bakebit.digitalRead(button)) time.sleep(.5) except IOError: print ("Error")
运行结果如下： BakeBit - Button_nanopi_NEO
5 相关资料
- [Schematic](BakeBit - Button.pdf)
