Difference between revisions of "NanoPi M1/zh"
From FriendlyELEC WiKi
(→资源特性) |
(→接口布局) |
||
| Line 42: | Line 42: | ||
|3 || I2C0_SDA ||4 || VDD_5V | |3 || I2C0_SDA ||4 || VDD_5V | ||
|- | |- | ||
| − | |5 || I2C0_SCL ||6 || | + | |5 || I2C0_SCL ||6 || GND |
|- | |- | ||
|7 || GPIOG11 ||8 || UART1_TX/GPIOG6 | |7 || GPIOG11 ||8 || UART1_TX/GPIOG6 | ||
|- | |- | ||
| − | |9 || | + | |9 || GND ||10 || UART1_RX/GPIOG7 |
|- | |- | ||
|11 || UART2_TX/GPIOA0 ||12 || PWM1/GPIOA6 | |11 || UART2_TX/GPIOA0 ||12 || PWM1/GPIOA6 | ||
|- | |- | ||
| − | |13 || UART2_RTS/GPIOA2 ||14 || | + | |13 || UART2_RTS/GPIOA2 ||14 || GND |
|- | |- | ||
|15 || UART2_CTS/GPIOA3 ||16 || UART1_RTS/GPIOG8 | |15 || UART2_CTS/GPIOA3 ||16 || UART1_RTS/GPIOG8 | ||
| Line 56: | Line 56: | ||
|17 || SYS_3.3V ||18 || UART1_CTS/GPIOG9 | |17 || SYS_3.3V ||18 || UART1_CTS/GPIOG9 | ||
|- | |- | ||
| − | |19 || SPI0_MOSI/GPIOC0 ||20 || | + | |19 || SPI0_MOSI/GPIOC0 ||20 || GND |
|- | |- | ||
|21 || SIP0_MISO/GPIOC1 ||22 || UART2_RX/GPIOA1 | |21 || SIP0_MISO/GPIOC1 ||22 || UART2_RX/GPIOA1 | ||
| Line 62: | Line 62: | ||
|23 || SPI0_CLK/GPIOC29 ||24 || SPI0_CS/GPIOC3 | |23 || SPI0_CLK/GPIOC29 ||24 || SPI0_CS/GPIOC3 | ||
|- | |- | ||
| − | |25 || | + | |25 || GND ||26 || SPDIF-OUT/GPIOA17 |
|- | |- | ||
|27 || I2C1_SDA/GPIOA19 ||28 || I2C1_SCL/GPIOA18 | |27 || I2C1_SDA/GPIOA19 ||28 || I2C1_SCL/GPIOA18 | ||
|- | |- | ||
| − | |29 || GPIOA20 ||30 || | + | |29 || GPIOA20 ||30 || GND |
|- | |- | ||
|31 || GGPIOA21 ||32 || GPIOA7 | |31 || GGPIOA21 ||32 || GPIOA7 | ||
|- | |- | ||
| − | |33 || GPIOA8 ||34 || | + | |33 || GPIOA8 ||34 || GND |
|- | |- | ||
|35 || UART3_CTS/SPI1_MISO/GPIOA16 ||36 || UART3_TX/SPI1_CS/GPIOA13 | |35 || UART3_CTS/SPI1_MISO/GPIOA16 ||36 || UART3_TX/SPI1_CS/GPIOA13 | ||
| Line 76: | Line 76: | ||
|37 || GPIOA9 ||38 || UART3_RTS/SPI1_MOSI/GPIOA15 | |37 || GPIOA9 ||38 || UART3_RTS/SPI1_MOSI/GPIOA15 | ||
|- | |- | ||
| − | |39 || | + | |39 || GND ||40 || UART3_RX/SPI1_CLK/GPIOA14 |
|} | |} | ||
| Line 84: | Line 84: | ||
|Pin# || Name | |Pin# || Name | ||
|- | |- | ||
| − | |1 || | + | |1 || GND |
|- | |- | ||
|2 || VDD_5V | |2 || VDD_5V | ||
| Line 94: | Line 94: | ||
* '''DVP Camera IF 管脚定义''' | * '''DVP Camera IF 管脚定义''' | ||
| − | + | ::{| class="wikitable" | |
| + | |- | ||
| + | |Pin# || Name | ||
| + | |- | ||
| + | |1, 2 || SYS_3.3V | ||
| + | |- | ||
| + | |7,9,13,15,24 || GND | ||
| + | |- | ||
| + | |3 || I2C2_SCL | ||
| + | |- | ||
| + | |4 || I2C2_SDA | ||
| + | |- | ||
| + | |5 || GPIOE15 | ||
| + | |- | ||
| + | |6 || GPIOE14 | ||
| + | |- | ||
| + | |8 || MCLK | ||
| + | |- | ||
| + | |10 || NC | ||
| + | |- | ||
| + | |11 || VSYNC | ||
| + | |- | ||
| + | |12 || HREF/HSYNC | ||
| + | |- | ||
| + | |14 || PCLK | ||
| + | |- | ||
| + | |16-23 || Data bit7-0 | ||
| + | |} | ||
:'''说明''' | :'''说明''' | ||
::#SYS_3.3V: 3.3V电源输出 | ::#SYS_3.3V: 3.3V电源输出 | ||
Revision as of 01:56, 14 March 2016
1 介绍
- NanoPi M1（以下简称M1）是友善之臂团队面向创客、嵌入式爱好者，电子艺术家、发烧友等群体推出的又一款完全开源的掌上创客神器，它的大小只有树莓派的大约2/3，可运行Ubuntu MATE、Debian、Android等操作系统。
- NanoPi M1采用了全志高性能处理器Allwinner H3，集成以太网、红外接收、视频/音频输出等接口，支持HDMI、AVOUT视频输出等功能。
- 尽管体积很小，设计却紧凑美观。NanoPi M1引出了相当丰富的接口，包括HDMI、以太网、USB-Host、USB-OTG、DVP camera和AVOUT（音频+视频）等。而且集成了板载麦克风，红外接收器，并且兼容树莓派GPIO口，并且拥有独立的调试串口等。
2 资源特性
- CPU：Allwinner H3, Quad-core Cortex-A7@1.2GHz
- GPU：Mali400MP2@600MHz，Supports OpenGL ES2.0
- DDR3 RAM：512MB
- 网络：10/100M以太网
- 音频：3.5mm耳机座/Via HDMI
- 麦克风：板载麦克风
- 红外：板载红外接收模块
- USB Host：Type A型号，USB 2.0 x 3
- MicroSD Slot：x1
- MicroUSB ：支持供电和数据传输，有OTG功能
- 视频输出: HDMI 1.4 1080P高清显示, CVBS
- DVP Camera接口：24pin，0.5mm间距竖直贴片FPC座
- 调试串口：4Pin，2.54mm排针
- GPIO： 40pin, 2.54mm间距，兼容RasberryPi2的扩展GPIO，含UART, SPI, I2C, PWM, IO等管脚资源
- 按键：电源按键x1，复位按键x1
- PC Size: 64 x 50mm
- Power Supply: DC 5V/2A
- OS/Software: u-boot，Ubuntu MATE，Debian
3 接口布局和尺寸
3.1 接口布局
- GPIO管脚定义
Pin# Name Pin# Name 1 SYS_3.3V 2 VDD_5V 3 I2C0_SDA 4 VDD_5V 5 I2C0_SCL 6 GND 7 GPIOG11 8 UART1_TX/GPIOG6 9 GND 10 UART1_RX/GPIOG7 11 UART2_TX/GPIOA0 12 PWM1/GPIOA6 13 UART2_RTS/GPIOA2 14 GND 15 UART2_CTS/GPIOA3 16 UART1_RTS/GPIOG8 17 SYS_3.3V 18 UART1_CTS/GPIOG9 19 SPI0_MOSI/GPIOC0 20 GND 21 SIP0_MISO/GPIOC1 22 UART2_RX/GPIOA1 23 SPI0_CLK/GPIOC29 24 SPI0_CS/GPIOC3 25 GND 26 SPDIF-OUT/GPIOA17 27 I2C1_SDA/GPIOA19 28 I2C1_SCL/GPIOA18 29 GPIOA20 30 GND 31 GGPIOA21 32 GPIOA7 33 GPIOA8 34 GND 35 UART3_CTS/SPI1_MISO/GPIOA16 36 UART3_TX/SPI1_CS/GPIOA13 37 GPIOA9 38 UART3_RTS/SPI1_MOSI/GPIOA15 39 GND 40 UART3_RX/SPI1_CLK/GPIOA14
- Debug Port（UART0）
Pin# Name 1 GND 2 VDD_5V 3 UART_TXD0 4 UART_RXD0
- DVP Camera IF 管脚定义
Pin# Name 1, 2 SYS_3.3V 7,9,13,15,24 GND 3 I2C2_SCL 4 I2C2_SDA 5 GPIOE15 6 GPIOE14 8 MCLK 10 NC 11 VSYNC 12 HREF/HSYNC 14 PCLK 16-23 Data bit7-0
- 说明
- SYS_3.3V: 3.3V电源输出
- VDD_5V: 5V电源输入/输出。当电压大于MicroUSB时，向板子供电，否则板子从MicroUSB取电。输入范围：4.7～5.6V
- 全部信号引脚均为3.3V电平，输出电流为5mA,可以带动小负荷模块，io都不能带负载
- 更详细的信息请查看原理图：[]
3.2 机械尺寸
- 详细尺寸：[]
