Difference between revisions of "APITestPage/zh"

From FriendlyELEC WiKi
Jump to: navigation, search
(updated by API)
(updated by API)
Line 1: Line 1:
===如何使用SDIO WiFi===
+
 
====AP模式====
+
* FriendlyWrt系统的无线功能默认是关闭状态, 要启用WiFi, 可点击“网络>无线”进入配置无线WiFi界面, 找到“无线未启用”那一行, 点击后面的“启用”按钮即可<br />
+
* 启用后, 在手机上搜索连接名称类拟 FriendlyWrt-xx:yy:zz 名称的WiFi热点, 输入默认密码password即可连接<br />
+
* {{{1}}}支持的SDIO WiFi型号为: rtl8822cs<br />
+
====无线中继模式====
+
* 连接到主无线路由器
+
点击 "网络" -> "无线", 在界面上点击 "Generic MAC80211 802.11ac/b/g/n" 后面的 "扫描" 按钮扫描网络,点击无线路由器后面的 "加入网络" 按钮,<br />
+
在加入网络的配置页面中,勾选 "重置无线配置",在 "WPA密钥"一栏中输入密钥,其他配置保持默认,点 "提交",再点击 "保存",<br />
+
最后点 "保存并应用", 连接成功后,可以在FriendlyWrt首页看到IP地址。
+
* 创建无线热点
+
点击 "网络" -> "无线",在界面上点击 "Generic MAC80211 802.11ac/b/g/n" 后面的 "添加" 按钮,将会弹出 "编辑无线网络" 页面,<br />
+
在 "工作频率" 一栏中设置无线信道(例如"40 (5200 MHz)"),<br />
+
在 "ESSID" 一栏中,输入热点名称,<br />
+
在 "网络" 一栏中,钩选 "lan",<br />
+
点击 "无线安全", 设置加密类型,然后点击 "保存", 然后点击 "保存并应用",<br />
+
由于需要重启才能生效,点击 "系统" 选择 "重启"。
+
===How to use SDIO WiFi===
+
====AP Mode====
+
* FriendlyWrt's wireless function is disabled by default, to enable WiFi, you can click "Network > Wireless", and then click the "Enable" button.<br />
+
* Search for a WiFi hotspot with a name like FriendlyWrt-xx:yy:zz on your phone, enter the default password "password" to connect.<br />
+
* SDIO WiFi models supported: rtl8822cs<br />
+
====Wireless Repeater Mode====
+
* Connect to the wireless router
+
Click "Network" -> "Wireless", Click the "Scan" button next to "Generic MAC80211 802.11ac/b/g/n" to scan for networks, select the router you want to connect and then click the "Join Network" button, <br />
+
In the network joining configuration page, turn on "Replace wireless configuration", enter the key in the "WPA passphrase" field, keep other configurations as default, click "Submit," and then click "Save", <br />
+
Finally, click "Save and Apply", if normal, you can see the IP address on the FriendlyWrt homepage.
+
* Create wireless hotspot
+
Click "Network" -> "Wireless", Click the "Add" button next to "Generic MAC80211 802.11ac/b/g/n",the "Edit wireless network" page will pop up,<br />
+
Set the wireless channel in the "Operating frequency" field (e.g., "40 (5200 MHz)"),<br />
+
In the "ESSID" field, input the hotspot name, <br />
+
In the "Network" field, select "lan", <br />
+
Click on "Wireless Security", set the encryption type, then click "Save" and "Save and Apply", <br />
+
It requires a reboot to take effect, click on "System" menu, then select "Reboot". <br />
+

Revision as of 10:53, 4 December 2023