Difference between revisions of "Template:OfficialUbuntuCore"

Revision as of 08:28, 15 June 2022

   User Name: pi
   Password: pi

   User Name: root
   Password: fa

$ sudo apt-get update

By default "eth0" is assigned an IP address obtained via dhcp. If you want to change the setting you need to change the following file:

vi /etc/network/interfaces.d/eth0

For example if you want to assign a static IP to it you can run the following commands:

auto eth0
iface eth0 inet static
    address 192.168.1.231
    netmask 255.255.255.0
    gateway 192.168.1.1

You also need to modify the following file to add the DNS configuration:

vi /etc/systemd/resolved.conf

For example, set to 192.168.1.1:

[Resolve]
DNS=192.168.1.1

Restart the systemd-resolved service with the following command:

sudo systemctl restart systemd-resolved.service
sudo systemctl enable systemd-resolved.service

To change the setting of "eth1" you can add a new file similar to eth0's configuration file under the /etc/network/interfaces.d/ directory.

sudo dpkg -i /opt/linux-headers-*.deb

@@ Line 27: / Line 27: @@
 {{#switch: {{{1}}}
   | NanoPi-R5S =
-The other two network ports are set up with static IP addresses, as follows:<br/>
+The other two ethernet ports are set up with static IP addresses, as follows:<br/>
 eth1: 192.168.2.1<br/>
 eth2: 192.168.3.1<br/>