Difference between revisions of "Template:OfficialUbuntuCore"

Revision as of 03:19, 23 January 2021

   User Name: pi
   Password: pi

   User Name: Root
   Password: fa

$ sudo apt-get update

By default "eth0" is assigned an IP address obtained via dhcp. If you want to change the setting you need to change the following file:

vi /etc/network/interfaces.d/eth0

For example if you want to assign a static IP to it you can run the following commands:

auto eth0
iface eth0 inet static
    address 192.168.1.231
    netmask 255.255.255.0
    gateway 192.168.1.1

You also need to modify the following file to add the DNS configuration:

vi /etc/systemd/resolved.conf

例如设置为192.168.1.1:

[Resolve]
DNS=192.168.1.1

Restart the systemd-resolved service with the following command:

sudo systemctl restart systemd-resolved.service
sudo systemctl enable systemd-resolved.service

To change the setting of "eth1" you can add a new file similar to eth0's configuration file under the /etc/network/interfaces.d/ directory.

@@ Line 23: / Line 23: @@
      netmask 255.255.255.0
      gateway 192.168.1.1
+</syntaxhighlight>
+You also need to modify the following file to add the DNS configuration:
+<syntaxhighlight lang="bash">
+vi /etc/systemd/resolved.conf
+</syntaxhighlight>
+例如设置为192.168.1.1:
+<syntaxhighlight lang="bash">
+[Resolve]
+DNS=192.168.1.1
+</syntaxhighlight>
+Restart the systemd-resolved service with the following command:
+<syntaxhighlight lang="bash">
+sudo systemctl restart systemd-resolved.service
+sudo systemctl enable systemd-resolved.service
 </syntaxhighlight>
 To change the setting of "eth1" you can add a new file similar to eth0's configuration file under the /etc/network/interfaces.d/ directory.