Difference between revisions of "Template:BurnLinuxToSD-Allwinner/zh"

From FriendlyELEC WiKi
Jump to: navigation, search
(updated by API)
(烧写Linux系统)
Line 1: Line 1:
====烧写Linux系统====
+
====Install Linux====
=====烧写到TF卡=====
+
=====Flash to TF Card=====
* FriendlyCore / FriendlyWrt 等系统都属于 Linux 系统,所以它们的烧写方法是一样。<br>
+
* FriendlyCore / FriendlyWrt are both based on Linux distributions and their installation methods are the same.<br>
* Linux 系统固件和烧写工具 win32diskimager.rar 分别解压,在 Windows 下插入TF卡(限4G及以上的卡),以管理员身份运行烧写工具  win32diskimager,在烧写工具  win32diskimager 的界面上,选择你的TF卡盘符,选择Linux 系统固件,点击 Write 按钮烧写。
+
* Extract the Linux image and win32diskimager.rar files. Insert a TF card(at least 8G) into a Windows PC and run the win32diskimager utility as administrator. On the utility's main window select your TF card's drive, the wanted image file and click on "write" to start flashing the TF card.
  
 
{{#switch: {{{2}}}
 
{{#switch: {{{2}}}

Revision as of 03:38, 7 February 2020

1 Install Linux

1.1 Flash to TF Card
  • FriendlyCore / FriendlyWrt are both based on Linux distributions and their installation methods are the same.
  • Extract the Linux image and win32diskimager.rar files. Insert a TF card(at least 8G) into a Windows PC and run the win32diskimager utility as administrator. On the utility's main window select your TF card's drive, the wanted image file and click on "write" to start flashing the TF card.


成功烧写后,会看到如下界面:
win32disk-finish

  • 当制作完成TF卡后,拔出TF卡插入 BOOT 卡槽,上电启动(注意,这里需要5V/2A的供电),你可以看到STAT灯闪烁,这时你已经成功启动系统。