Difference between revisions of "SOM-RK3399"

From FriendlyELEC WiKi
Jump to: navigation, search
(→‎Carrier Board)
(→‎Introduction)
Line 4: Line 4:
 
[[File:SOM-RK3399_1904-B01.jpg|thumb|Overview]]
 
[[File:SOM-RK3399_1904-B01.jpg|thumb|Overview]]
 
[[File:SOM-RK3399_1904-layout.jpg|thumb|500px]]
 
[[File:SOM-RK3399_1904-layout.jpg|thumb|500px]]
 +
*The SOM-RK3399 is a 260-pin high performance ARM module designed and developed by FriendlyElec. It is based on Rockchip’s 64-bit hexa-core RK3399 SoC. The regular version has 2GB DDR3 RAM, 16GB Flash, onboard 2x2 MIMO dual-antenna WiFi module. Its dimension is 69.6 x 50 mm. It has a TypeC power port and USB-C display port, and can work by itself without a carrier board.
 +
 +
*The SOM-RK3399 module has various interfaces and ports. It can drive a 4-channel NVMe high speed SSD hard disk by working with a carrier board and the read/write rate can reach up to 1GB/s. It can drive dual-MIPI WDR cameras. It has an eDP interface, MIPI interface, USB 3.0, two USB 2.0 interfaces and other interfaces such as I2C, I2S, SPI, PWM, GPIO, serial and etc.
 +
 +
*The SOM-RK3399 can run popular OS systems such as Android 8.1, Ubuntu 18.04, Armbian and Buildroot smoothly. It has well established software support. Especially it has NN SDK packages for neural networks in Android 8.1, VPU hardware encoding/decoding in Qt-5.10, and GPU graphic acceleration. It supports development of dynamic GUI with Qt Quick. It is a perfect platform for startups to develop applications and prototypes in facial detection, machine vision, VR, autonomous-driving, deep learning, AI and etc.
  
 
==Hardware Spec==
 
==Hardware Spec==

Revision as of 10:25, 30 May 2019

查看中文

1 Introduction

Overview
SOM-RK3399 1904-layout.jpg
  • The SOM-RK3399 is a 260-pin high performance ARM module designed and developed by FriendlyElec. It is based on Rockchip’s 64-bit hexa-core RK3399 SoC. The regular version has 2GB DDR3 RAM, 16GB Flash, onboard 2x2 MIMO dual-antenna WiFi module. Its dimension is 69.6 x 50 mm. It has a TypeC power port and USB-C display port, and can work by itself without a carrier board.
  • The SOM-RK3399 module has various interfaces and ports. It can drive a 4-channel NVMe high speed SSD hard disk by working with a carrier board and the read/write rate can reach up to 1GB/s. It can drive dual-MIPI WDR cameras. It has an eDP interface, MIPI interface, USB 3.0, two USB 2.0 interfaces and other interfaces such as I2C, I2S, SPI, PWM, GPIO, serial and etc.
  • The SOM-RK3399 can run popular OS systems such as Android 8.1, Ubuntu 18.04, Armbian and Buildroot smoothly. It has well established software support. Especially it has NN SDK packages for neural networks in Android 8.1, VPU hardware encoding/decoding in Qt-5.10, and GPU graphic acceleration. It supports development of dynamic GUI with Qt Quick. It is a perfect platform for startups to develop applications and prototypes in facial detection, machine vision, VR, autonomous-driving, deep learning, AI and etc.

2 Hardware Spec

  • SoC: Rockchip RK3399
    • CPU: big.LITTLE，Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53(up to 1.5GHz)
    • GPU: Mali-T864 GPU，supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC
    • VPU: 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
  • PMU: RK808-D PMIC, cooperated with independent DC/DC, enabling DVFS, software power-down, RTC wake-up, system sleep mode
  • RAM: Dual-Channel 2GB DDR3
  • Flash: 16GB eMMC 5.1 Flash
  • Ethernet: Native Gigabit Ethernet
  • Wi-Fi/BT: 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, dual antenna interface
  • Video Input: one or two 4-Lane MIPI-CSI, dual ISP, up to 13MPix/s，supports simultaneous input of dual camera data
  • Video output
    • HDMI: HDMI 2.0a, supports 4K@60Hz，HDCP 1.4/2.2
    • DP on Type-C: DisplayPort 1.2 Alt Mode on USB Type-C
    • LCD Interface: one eDP 1.3（4-Lane，10.8Gbps）, one or two 4-Lane MIPI-DSI
  • USB
    • USB 2.0: 2 independent native USB 2.0 Host
    • USB 3.0: 1 native USB 3.0 Host
    • USB Type-C: Supports USB3.0 Type-C and DisplayPort 1.2 Alt Mode on USB Type-C
  • PCIe: PCIe x4, compatible with PCIe 2.1, Dual operation mode;
  • SDIO/MMC: 1x SDIO/MMC for SD Card
  • GPIOs, I2S, I2C, PWM, UART, SPI, ADCs
    • 2 X 1.8V I2C, 1 x 3V I2C
    • 1 x 3V UART/SPI
    • 2 x PWM
    • 1 x IR-RX
    • 1 x SPDIF_TX
    • 1 x 1.8V I2S,
    • 6 x 1.8V GPIOs, 8 x 3V GPIOs
    • ADC: 3 x 1.8V ADC inputs
  • Debug: one Debug UART, 3V level, 1500000bps
  • Keys: PowerKey, Reset, Recovery
  • LED: 1 x power LED and 1 x GPIO Controlled LED
  • Power supply: DC 12V/1A
  • PCB: 8 Layer, 50 mm x 69.6 mm, 260 Pin edge connector
  • Ambient Operating Temperature: -20℃ to 70℃

3 Software Features

4 Diagram, Layout and Dimension

Top Bottom
Pin# Assignment Pin Type If Not Use Description Pin# Assignment Pin Type If Not Use Description
1 VCC_IN Power IN / 12V Power Input 2 VCC_IN Power IN / 12V Power Input
3 VCC_IN Power IN / 4 VCC_IN Power IN /
5 VCC_IN Power IN / 6 VCC_IN Power IN /
7 VCC_IN Power IN / 8 VCC_IN Power IN /
9 GND Power / System Ground(0V) 10 GND Power / System Ground(0V)
11 GND Power / 12 GND Power /
13 VCC5V0_SYS Power OUT float 5V Power Output，2A max. Auto on when system power on, and off when system power off. 14 PWR_KEY In float System Power Key signal, active low, internal pulled up to 3.3V with 10K
15 VCC5V0_SYS Power OUT float 16 VDC_ONOFF In float Power On Mode Select, float for Auto Start，short to GND for PowerKey Mode
17 VCC5V0_SYS Power OUT float 18 RTC_BATT_IN Power IN float RTC backup battery（3V）input，backup current is 25uA
19 VCC5V0_SYS Power OUT float 20 RECOVERY In float System RECOVERY Key signal，acticve low
21 VCC3V3_SYS Power OUT float 3.3V Power Output，1A max. Auto on when system power on, and off when system power off. 22 RESET_IN_H In float RESET signal， acticve hight
23 VCC3V3_SYS Power OUT float 24 GND Power / System Ground(0V)
25 VCC3V3_SYS Power OUT float 26 ADC_IN0 In float 0V to 1.8V inputs of RK3399 SoC ADC
27 VCC3V3_SYS Power OUT float 28 ADC_IN2 In float
29 VCC_1V8 Power OUT float 1.8V Power Output，200mA max. Auto on when system power on, and off when system power off. 30 ADC_IN3 In float
31 VCC_1V8 Power OUT float 32 GND Power / System Ground(0V)
33 VCC3V3_S3 Power OUT float 3.3V Power Output，100mA max. Auto on when system power on, and off when system sleep or power off. 34 GPIO1_A0 In/Out float 3V GPIO. Linux GPIO 32
35 GND Power / System Ground(0V) 36 GPIO1_A1 In/Out float 3V GPIO. Linux GPIO 33
37 GPIO0_A2 In/Out float 1.8V GPIO. Linux GPIO 2 38 GPIO1_A3 In/Out float 3V GPIO. Linux GPIO 35
39 GPIO2_A2 In/Out float 1.8V GPIO. Linux GPIO 2 40 GPIO1_A4 In/Out float 3V GPIO. Linux GPIO 36
41 GPIO2_A3 In/Out float 1.8V GPIO. Linux GPIO 67 42 GPIO1_C2 In/Out float 3V GPIO . Linux GPIO 50
43 GPIO2_A4 In/Out float 1.8V GPIO. Linux GPIO 68 44 GPIO1_C6 In/Out float 3V GPIO. Linux GPIO 54
45 GPIO2_A5 In/Out float 1.8V GPIO. Linux GPIO 69 46 GPIO1_C7 In/Out float 3V GPIO . Linux GPIO 55
47 GPIO2_A6 In/Out float 1.8V GPIO. Linux GPIO 70 48 GPIO1_D0 In/Out float 3V GPIO . Linux GPIO 56
49 IR_RX In float Infrared Receiver input, 1.8V level 50 GPIO4_C5/SPDIF_TX In/Out float 3V GPIO . Linux GPIO 149. or SPDIF Output
51 GND Power / System Ground(0V) 52 UART2DBG_TX Out float Debug UART TX, 1500000bps, 3V level
53 I2C1_SCL Out float I2C1 clock, 1.8V level, open drian with 2.2K pulled internal 54 UART2DBG_RX In float Debug UART RX, 1500000bps, 3V level
55 I2C1_SDA In/Out float I2C1 data, 1.8V level, open drian with 2.2K pulled internal 56 SPI1_CSn0 Out float SPI1 chip select, 3V level
57 I2C2_SDA In/Out float I2C2 data, 1.8V level, open drian with 2.2K pulled internal 58 SPI1_TXD/UART4_TX Out float SPI1 MOSI, or UART4 TX,3V level
59 I2C2_SCL Out float I2C2 clock, 1.8V level, open drian with 2.2K pulled internal 60 SPI1_RXD/UART4_RX In float SPI1 MISO, or UART4 RX,3V level
61 I2C7_SCL_HDMI Out float I2C7 clock, 1.8V level, for HDMI EDID CLK, open drian with 2.2K pulled internal 62 SPI1_CLK Out float SPI1 Clock, 3V level
63 I2C7_SDA_HDMI In/Out float I2C7 data, 1.8V level, for HDMI EDID DATA, open drian with 2.2K pulled internal 64 GND Power / System Ground(0V)
65 GND Power / System Ground(0V) 66 GPIO4_C1/I2C3_SCL In/Out float I2C3 clock, 3V level，open drian. or GPIO，Linux GPIO 145
67 I2S0_SCLK Out float I2S0 continuous serial clock, 1.8V level 68 GPIO4_C0/I2C3_SDA In/Out float I2C3 data, 3V level，open drian. or GPIO，Linux GPIO 144
69 I2S0_LRCK_RX Out float I2S0 word select for input data, 1.8V level 70 I2C4_TPSCL Out float I2C4 clock，3V level， open drian with 2.2K pulled up，for touch panel
71 I2S0_LRCK_TX Out float I2S0 word select for output data, 1.8V level 72 I2C4_TPSDA In/Out float I2C4 data，3V level， open drian with 2.2K pulled up，for touch panel
73 I2S0_SDI0 In float I2S0 serial data, 1.8V level 74 GND Power / System Ground(0V)
75 I2S0_SDI1SDO3 In/out float I2S0 serial data, 1.8V level 76 HP_DET_H In Pull up to VCC3V3_SYS headphone insert detect, active hight
77 I2S0_SDI2SDO2 In/out float I2S0 serial data, 1.8V level 78 GPIO4_D5_LCD_BL_EN Out float LCD backlight on/off control, active hight, 3V level
79 I2S0_SDI3SDO1 In/out float I2S0 serial data, 1.8V level 80 GPIO4_D6_LCD_RST_H Out float LCD reset, active hight, 3V level.
81 I2S0_SDO0 out float I2S0 serial data, 1.8V level 82 GPIO1_B5_TP_RST Out float Touch panel reset, active low, 3V level
83 GND Power / System Ground(0V) 84 GPIO1_C4_TP_INT In float Touch panel IRQ, active low, 3V level
85 I2S_CLK out float I2S Mclk for I2S0 and I2S1 86 GND Power / System Ground(0V)
87 GND Power / System Ground(0V) 88 PWM0_BL Out float PWM0 for LCD backlight dimming
89 I2S1_SCLK Out float I2S1 continuous serial clock, 1.8V level 90 GPIO4_C6/PWM1 Out float PWM1 for cooling fan control
91 2S1_LRCK_RX Out float I2S1 word select for input data, 1.8V level 92 GND Power / System Ground(0V)
93 I2S1_LRCK_TX Out float I2S1 word select for output data, 1.8V level 94 VCC3V0_SD Power Out float 3V power out for SD card.
95 I2S1_SDI0 In float I2S0 serial data, 1.8V level 96 GND Power / System Ground(0V)
97 I2S1_SDO0 Out float I2S0 serial data, 1.8V level 98 SDMMC0_D0 In/Out float SD card Data0
99 MIPI_CSI0_RST Out float Camera Reset for MIPI CSI0, 1.8V level 100 SDMMC0_D1 In/Out float SD card Data1
101 MIPI_CSI0_PWN Out float Camera Power Down for MIPI CSI0, 1.8V level 102 SDMMC0_D2 In/Out float SD card Data2
103 MIPI_CSI1_RST Out float Camera Reset for MIPI CSI1, 1.8V level 104 SDMMC0_D3 In/Out float SD card Data3
105 MIPI_CSI1_PWN Out float Camera Power Down for MIPI CSI1, 1.8V level 106 SDMMC0_CMD Out float SD card CMD
107 VCC1V8_CAM Power Out float Power Out for Camera IO 108 SDMMC0_DET_L In float SD card detect
109 GND Power / System Ground(0V) 110 GND Power / System Ground(0V)
111 GPIO2_B3_CIF_CLKOUTA Out float MCLK for camera sensor 112 SDMMC0_CLK Out float SD card Clock
113 GND Power / System Ground(0V) 114 GND Power / System Ground(0V)
115 MIPI_RX0_D3N In float MIPI CSI0 negative differential data line 116 MIPI_TX1/RX1_D0N In/Out float MIPI CSI1/DSI1 negative differential data line
117 MIPI_RX0_D3P In float MIPI CSI0

positive differential data line

118 MIPI_TX1/RX1_D0P In/Out float MIPI CSI1/DSI1

positive differential data line

119 GND Power / System Ground(0V) 120 GND Power / System Ground(0V)
121 MIPI_RX0_D2N In float MIPI CSI0 negative differential data line 122 MIPI_TX1/RX1_D1N In/Out float MIPI CSI1/DSI1 negative differential data line
123 MIPI_RX0_D2P In float MIPI CSI0

positive differential data line

124 MIPI_TX1/RX1_D1P In/Out float MIPI CSI1/DSI1

positive differential data line

125 GND Power / System Ground(0V) 126 GND Power / System Ground(0V)
127 MIPI_RX0_CLKN In float MIPI CSI0 negative differential clock line 128 MIPI_TX1/RX1_CLKN In/Out float MIPI CSI1/DSI1 negative differential clock line
129 MIPI_RX0_CLKP In float MIPI CSI0

positive differential clock line

130 MIPI_TX1/RX1_CLKP In/Out float MIPI CSI1/DSI1

positive differential clock line

131 GND Power / System Ground(0V) 132 GND Power / System Ground(0V)
133 MIPI_RX0_D1N In float MIPI CSI0 negative differential data line 134 MIPI_TX1/RX1_D2N In/Out float MIPI CSI1/DSI1 negative differential data line
135 MIPI_RX0_D1P In float MIPI CSI0

positive differential data line

136 MIPI_TX1/RX1_D2P In/Out float MIPI CSI1/DSI1

positive differential data line

137 GND Power / System Ground(0V) 138 GND Power / System Ground(0V)
139 MIPI_RX0_D0N In float MIPI CSI0 negative differential data line 140 MIPI_TX1/RX1_D3N In/Out float MIPI CSI1/DSI1 negative differential data line
141 MIPI_RX0_D0P In float MIPI CSI0

positive differential data line

142 MIPI_TX1/RX1_D3P In/Out float MIPI CSI1/DSI1

positive differential data line

143 GND Power / System Ground(0V) 144 GND Power / System Ground(0V)
Connector Key Connector Key
145 HDMI_CEC In/Out float HDMI CEC signal, 3V level 146 GND Power / System Ground(0V)
147 HDMI_HPD In float HDMI hot plug 148 MIPI_TX0_D3N Out float MIPI DSI0 negetive differential data line
149 GND Power / System Ground(0V) 150 MIPI_TX0_D3P Out float MIPI DSI0 positive differential data line
151 HDMI_TXCN Out float HDMI differential clock line negative 152 GND Power / System Ground(0V)
153 HDMI_TXCP Out float HDMI differential clock line positive 154 MIPI_TX0_D2N Out float MIPI DSI0 negetive differential data line
155 GND Power / System Ground(0V) 156 MIPI_TX0_D2P Out float MIPI DSI0 positive differential data line
157 HDMI_TX0N Out float HDMI differential data line negative 158 GND Power / System Ground(0V)
159 HDMI_TX0P Out float HDMI differential data line positive 160 MIPI_TX0_CLKN Out float MIPI DSI0 negetive differential clock line
161 GND Power / System Ground(0V) 162 MIPI_TX0_CLKP Out float MIPI DSI0 positive differential clock line
163 HDMI_TX1N Out float HDMI differential data line negative 164 GND Power / System Ground(0V)
165 HDMI_TX1P Out float HDMI differential data line positive 166 MIPI_TX0_D1N Out float MIPI DSI0 negetive differential data line
167 GND Power / System Ground(0V) 168 MIPI_TX0_D1P Out float MIPI DSI0 positive differential data line
169 HDMI_TX2N Out float HDMI differential data line negative 170 GND Power / System Ground(0V)
171 HDMI_TX2P Out float HDMI differential data line positive 172 MIPI_TX0_D0N Out float MIPI DSI0 negetive differential data line
173 GND Power / System Ground(0V) 174 MIPI_TX0_D0P Out float MIPI DSI0 positive differential data line
175 USB3.0/TYPE-C1_DP In/Out float TYPEC1 USB 2.0 data+ 176 GND Power / System Ground(0V)
177 USB3.0/TYPE-C1_DM In/Out float TYPEC1 USB 2.0 data- 178 PCIE_RX3_N In float PCIe negative differential data line
179 GND Power / System Ground(0V) 180 PCIE_RX3_P In float PCIe positive differential data line
181 USB3.0/TYPEC1_TX1P Out float TYPEC1 USB3.0 PHY0 SuperSpeed TX1P 182 GND Power / System Ground(0V)
183 USB3.0/TYPEC1_TX1M Out float TYPEC1 USB3.0 PHY0 SuperSpeed TX1M 184 PCIE_TX3N Out float PCIe negative differential data line
185 GND Power / System Ground(0V) 186 PCIE_TX3P Out float PCIe positive differential data line
187 USB3.0/TYPEC1_RX1P In float TYPEC1 USB3.0 PHY0 SuperSpeed RX1P 188 GND Power / System Ground(0V)
189 USB3.0/TYPEC1_RX1M In float TYPEC1 USB3.0 PHY0 SuperSpeed RX1M 190 PCIE_RX2_N In float PCIe negative differential data line
191 GND Power / System Ground(0V) 192 PCIE_RX2_P In float PCIe positive differential data line
193 TYPEC1_TX2P Out float TYPEC1 USB3.0 PHY0 SuperSpeed TX2P 194 GND Power / System Ground(0V)
195 TYPEC1_TX2M Out float TYPEC1 USB3.0 PHY0 SuperSpeed TX2M 196 PCIE_TX2N Out float PCIe negative differential data line
197 GND Power / System Ground(0V) 198 PCIE_TX2P Out float PCIe positive differential data line
199 TYPEC1_RX2P In float TYPEC1 USB3.0 PHY0 SuperSpeed RX2P 200 GND Power / System Ground(0V)
201 TYPEC1_RX2M In float TYPEC1 USB3.0 PHY0 SuperSpeed RX2M 202 PCIE_RX1_N In float PCIe negative differential data line
203 GND Power / System Ground(0V) 204 PCIE_RX1_P In float PCIe positive differential data line
205 TYPEC1_SBU1 In/Out float TYPEC1 SBU1 206 GND Power / System Ground(0V)
207 TYPEC1_SBU2 In/Out float TYPEC1 SBU2 208 PCIE_TX1N Out float PCIe negative differential data line
209 GND Power / System Ground(0V) 210 PCIE_TX1P Out float PCIe positive differential data line
211 TYPEC1_SBU1_DC Out float TYPEC1 SBU1 DC Bias 212 GND Power / System Ground(0V)
213 TYPEC1_SBU2_DC Out float TYPEC1 SBU2 DC Bias 214 PCIE_RX0_N In float PCIe negative differential data line
215 TYPEC1_U2VBUSDET In float TYPEC1 Vbus detect 216 PCIE_RX0_P In float PCIe positive differential data line
217 GND Power / System Ground(0V) 218 GND Power / System Ground(0V)
219 HOST0_DP In/Out float USB 2.0 Host0 data+ 220 PCIE_TX0N Out float PCIe negative differential data line
221 HOST0_DM In/Out float USB 2.0 Host0 data- 222 PCIE_TX0P Out float PCIe positive differential data line
223 GND Power / System Ground(0V) 224 GND Power / System Ground(0V)
225 HOST1_DP In/Out float USB 2.0 Host1 data+ 226 PCIE_REF_CLKN Out float PCIe negative differential reference clock line
227 HOST1_DM In/Out float USB 2.0 Host1 data- 228 PCIE_REF_CLKP Out float PCIe positive differential reference clock line
229 GND Power / System Ground(0V) 230 GND Power / System Ground(0V)
231 EDP_TX3N Out float eDP data line negative 232 LAN_LED0_BLINK Out float 10/100/1000M Ethernet Status LED0
233 EDP_TX3P Out float eDP data line positive 234 LAN_LED1_LINK Out float 10/100/1000M Ethernet Status LED1
235 GND Power / System Ground(0V) 236 GND Power / System Ground(0V)
237 EDP_TX2N Out float eDP data line negative 238 MDI3- In/Out float 10/100/1000M Ethernet MDI3-
239 EDP_TX2P Out float eDP data line positive 240 MDI3+ In/Out float 10/100/1000M Ethernet MDI3+
241 GND Power / System Ground(0V) 242 GND Power / System Ground(0V)
243 EDP_TX1N Out float eDP data line negative 244 MDI2- In/Out float 10/100/1000M Ethernet MDI2-
245 EDP_TX1P Out float eDP data line positive 246 MDI2+ In/Out float 10/100/1000M Ethernet MDI2+
247 GND Power / System Ground(0V) 248 GND Power / System Ground(0V)
249 EDP_TX0N Out float eDP data line negative 250 MDI1- In/Out float 10/100/1000M Ethernet MDI1-
251 EDP_TX0P Out float eDP data line positive 252 MDI1+ In/Out float 10/100/1000M Ethernet MDI1+
253 GND Power / System Ground(0V) 254 GND Power / System Ground(0V)
255 EDP_AUXP In/Out float eDP AUX line positive 256 MDI0- In/Out float 10/100/1000M Ethernet MDI0-
257 EDP_AUXN In/Out float eDP AUX line negative 258 MDI0+ In/Out float 10/100/1000M Ethernet MDI0+
259 GND Power / System Ground(0V) 260 GND Power / System Ground(0V)

5 Carrier Board

SOM-RK3399 Dev Kit 1904-layout.jpg

6 Link to Rockchip Resources

7 Schematic, PCB CAD File

Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=SOM-RK3399&oldid=19416"