Difference between revisions of "SOM-RK3399/zh"

From FriendlyELEC WiKi
Jump to: navigation, search
(→‎硬件资源和特性)
(→‎布局和引脚定义)
Line 68: Line 68:
 
| Power IN
 
| Power IN
 
| /
 
| /
−
| rowspan="4" | 5V to 20V Power Input
+
| rowspan="4" | 12V Power Input
 
| 2
 
| 2
 
| style="background-color:#9a0000;" | VCC_IN
 
| style="background-color:#9a0000;" | VCC_IN
 
| Power IN
 
| Power IN
 
| /
 
| /
−
| rowspan="4" | 5V to 20V Power Input
+
| rowspan="4" | 12V Power Input
 
|-
 
|-
 
| 3
 
| 3

Revision as of 02:01, 29 May 2019

English

1 简介

Overview
SOM-RK3399 1904-layout.jpg

SOM-RK3399是一款基于RockChip RK3399 SoC设计的核心板，采用与260Pin DDR4内存条相同的金手指设计，集成2GB DDR3双通道内存，16GB eMMC Flash， Wi-Fi蓝牙模块，和千兆以太网PHY。

2 硬件资源和特性

  • SoC: Rockchip RK3399
    • CPU: big.LITTLE，Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53(up to 1.5GHz)
    • GPU: Mali-T864 GPU，supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC
    • VPU: 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
  • PMU: RK808-D PMIC, cooperated with independent DC/DC, enabling DVFS, solfware power-down, RTC wake-up, system sleep mode
  • RAM: Dual-Channel 2GB DDR3
  • Flash: 16GB eMMC 5.1 Flash
  • Ethernet: Native Gigabit Ethernet
  • Wi-Fi/BT: 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, dual antenna interface
  • Video Input: one or two 4-Lane MIPI-CSI, dual ISP, up to 13MPix/s，supports simultaneous input of dual camera data
  • Video output
    • HDMI: HDMI 2.0a, supports 4K@60Hz，HDCP 1.4/2.2
    • DP on Type-C: DisplayPort 1.2 Alt Mode on USB Type-C
    • LCD Interface: one eDP 1.3（4-Lane，10.8Gbps）, one or two 4-Lane MIPI-DSI
  • USB
    • USB 2.0: 2 independent native USB 2.0 Host
    • USB 3.0: 1 native USB 3.0 Host
    • USB Type-C: Supports USB3.0 Type-C and DisplayPort 1.2 Alt Mode on USB Type-C
  • PCIe: PCIe x4, compatible with PCIe 2.1, Dual operation mode;
  • SDIO/MMC: 1x SDIO/MMC for SD Card
  • GPIOs, I2S, I2C, PWM, UART, SPI, ADCs
    • 2 X 1.8V I2C, 1 x 3V I2C
    • 1 x 3V UART/SPI
    • 2 x PWM
    • 1 x IR-RX
    • 1 x SPDIF_TX
    • 1 x 1.8V I2S,
    • 6 x 1.8V GPIOs, 8 x 3V GPIOs
    • ADC: 3 x 1.8V ADC inputs
  • Debug: one Debug UART, 3V level, 1500000bps
  • Keys: PowerKey, Reset, Recovery
  • LED: 1 x power LED and 1 x GPIO Controlled LED
  • Power supply: DC 12V/1A
  • PCB: 8 Layer, 50 mm x 69.6 mm, 260 Pin edge connector
  • Ambient Operating Temperature: -20℃ to 70℃

3 软件资源和特性

4 布局和引脚定义

Top Bottom
Pin# Assignment Pin Type If Not Use Description Pin# Assignment Pin Type If Not Use Description
1 VCC_IN Power IN / 12V Power Input 2 VCC_IN Power IN / 12V Power Input
3 VCC_IN Power IN / 4 VCC_IN Power IN /
5 VCC_IN Power IN / 6 VCC_IN Power IN /
7 VCC_IN Power IN / 8 VCC_IN Power IN /
9 GND Power / System Ground(0V) 10 GND Power / System Ground(0V)
11 GND Power / 12 GND Power /
13 VCC5V0_SYS Power OUT float 5V Power Output，2A max. Auto on when system power on, and off when system power off. 14 PWR_KEY In float System Power Key signal, active low, internal pulled up to 3.3V with 10K
15 VCC5V0_SYS Power OUT float 16 VDC_ONOFF In float Power On Mode Select, float for Auto Start，short to GND for PowerKey Mode
17 VCC5V0_SYS Power OUT float 18 RTC_BATT_IN Power IN float RTC backup battery（3V）input，backup current is 25uA
19 VCC5V0_SYS Power OUT float 20 RECOVERY In float System RECOVERY Key signal，acticve low
21 VCC3V3_SYS Power OUT float 3.3V Power Output，1A max. Auto on when system power on, and off when system power off. 22 RESET_IN_H In float RESET signal， acticve hight
23 VCC3V3_SYS Power OUT float 24 GND Power / System Ground(0V)
25 VCC3V3_SYS Power OUT float 26 ADC_IN0 In float 0V to 1.8V inputs of RK3399 SoC ADC
27 VCC3V3_SYS Power OUT float 28 ADC_IN2 In float
29 VCC_1V8 Power OUT float 1.8V Power Output，200mA max. Auto on when system power on, and off when system power off. 30 ADC_IN3 In float
31 VCC_1V8 Power OUT float 32 GND Power / System Ground(0V)
33 VCC3V3_S3 Power OUT float 3.3V Power Output，100mA max. Auto on when system power on, and off when system sleep or power off. 34 GPIO1_A0 In/Out float 3V GPIO. Linux GPIO 32
35 GND Power / System Ground(0V) 36 GPIO1_A1 In/Out float 3V GPIO. Linux GPIO 33
37 GPIO0_A2 In/Out float 1.8V GPIO. Linux GPIO 2 38 GPIO1_A3 In/Out float 3V GPIO. Linux GPIO 35
39 GPIO2_A2 In/Out float 1.8V GPIO. Linux GPIO 2 40 GPIO1_A4 In/Out float 3V GPIO. Linux GPIO 36
41 GPIO2_A3 In/Out float 1.8V GPIO. Linux GPIO 67 42 GPIO1_C2 In/Out float 3V GPIO . Linux GPIO 50
43 GPIO2_A4 In/Out float 1.8V GPIO. Linux GPIO 68 44 GPIO1_C6 In/Out float 3V GPIO. Linux GPIO 54
45 GPIO2_A5 In/Out float 1.8V GPIO. Linux GPIO 69 46 GPIO1_C7 In/Out float 3V GPIO . Linux GPIO 55
47 GPIO2_A6 In/Out float 1.8V GPIO. Linux GPIO 70 48 GPIO1_D0 In/Out float 3V GPIO . Linux GPIO 56
49 IR_RX In float Infrared Receiver input, 1.8V level 50 GPIO4_C5/SPDIF_TX In/Out float 3V GPIO . Linux GPIO 149. or SPDIF Output
51 GND Power / System Ground(0V) 52 UART2DBG_TX Out float Debug UART TX, 1500000bps, 3V level
53 I2C1_SCL Out float I2C1 clock, 1.8V level, open drian with 2.2K pulled internal 54 UART2DBG_RX In float Debug UART RX, 1500000bps, 3V level
55 I2C1_SDA In/Out float I2C1 data, 1.8V level, open drian with 2.2K pulled internal 56 SPI1_CSn0 Out float SPI1 chip select, 3V level
57 I2C2_SDA In/Out float I2C2 data, 1.8V level, open drian with 2.2K pulled internal 58 SPI1_TXD/UART4_TX Out float SPI1 MOSI, or UART4 TX,3V level
59 I2C2_SCL Out float I2C2 clock, 1.8V level, open drian with 2.2K pulled internal 60 SPI1_RXD/UART4_RX In float SPI1 MISO, or UART4 RX,3V level
61 I2C7_SCL_HDMI Out float I2C7 clock, 1.8V level, for HDMI EDID CLK, open drian with 2.2K pulled internal 62 SPI1_CLK Out float SPI1 Clock, 3V level
63 I2C7_SDA_HDMI In/Out float I2C7 data, 1.8V level, for HDMI EDID DATA, open drian with 2.2K pulled internal 64 GND Power / System Ground(0V)
65 GND Power / System Ground(0V) 66 GPIO4_C1/I2C3_SCL In/Out float I2C3 clock, 3V level，open drian. or GPIO，Linux GPIO 145
67 I2S0_SCLK Out float I2S0 continuous serial clock, 1.8V level 68 GPIO4_C0/I2C3_SDA In/Out float I2C3 data, 3V level，open drian. or GPIO，Linux GPIO 144
69 I2S0_LRCK_RX Out float I2S0 word select for input data, 1.8V level 70 I2C4_TPSCL Out float I2C4 clock，3V level， open drian with 2.2K pulled up，for touch panel
71 I2S0_LRCK_TX Out float I2S0 word select for output data, 1.8V level 72 I2C4_TPSDA In/Out float I2C4 data，3V level， open drian with 2.2K pulled up，for touch panel
73 I2S0_SDI0 In float I2S0 serial data, 1.8V level 74 GND Power / System Ground(0V)
75 I2S0_SDI1SDO3 In/out float I2S0 serial data, 1.8V level 76 HP_DET_H In Pull up to VCC3V3_SYS headphone insert detect, active hight
77 I2S0_SDI2SDO2 In/out float I2S0 serial data, 1.8V level 78 GPIO4_D5_LCD_BL_EN Out float LCD backlight on/off control, active hight, 3V level
79 I2S0_SDI3SDO1 In/out float I2S0 serial data, 1.8V level 80 GPIO4_D6_LCD_RST_H Out float LCD reset, active hight, 3V level.
81 I2S0_SDO0 out float I2S0 serial data, 1.8V level 82 GPIO1_B5_TP_RST Out float Touch panel reset, active low, 3V level
83 GND Power / System Ground(0V) 84 GPIO1_C4_TP_INT In float Touch panel IRQ, active low, 3V level
85 I2S_CLK out float I2S Mclk for I2S0 and I2S1 86 GND Power / System Ground(0V)
87 GND Power / System Ground(0V) 88 PWM0_BL Out float PWM0 for LCD backlight dimming
89 I2S1_SCLK Out float I2S1 continuous serial clock, 1.8V level 90 GPIO4_C6/PWM1 Out float PWM1 for cooling fan control
91 2S1_LRCK_RX Out float I2S1 word select for input data, 1.8V level 92 GND Power / System Ground(0V)
93 I2S1_LRCK_TX Out float I2S1 word select for output data, 1.8V level 94 VCC3V0_SD Power Out float 3V power out for SD card.
95 I2S1_SDI0 In float I2S0 serial data, 1.8V level 96 GND Power / System Ground(0V)
97 I2S1_SDO0 Out float I2S0 serial data, 1.8V level 98 SDMMC0_D0 In/Out float SD card Data0
99 MIPI_CSI0_RST Out float Camera Reset for MIPI CSI0, 1.8V level 100 SDMMC0_D1 In/Out float SD card Data1
101 MIPI_CSI0_PWN Out float Camera Power Down for MIPI CSI0, 1.8V level 102 SDMMC0_D2 In/Out float SD card Data2
103 MIPI_CSI1_RST Out float Camera Reset for MIPI CSI1, 1.8V level 104 SDMMC0_D3 In/Out float SD card Data3
105 MIPI_CSI1_PWN Out float Camera Power Down for MIPI CSI1, 1.8V level 106 SDMMC0_CMD Out float SD card CMD
107 VCC1V8_CAM Power Out float Power Out for Camera IO 108 SDMMC0_DET_L In float SD card detect
109 GND Power / System Ground(0V) 110 GND Power / System Ground(0V)
111 GPIO2_B3_CIF_CLKOUTA Out float MCLK for camera sensor 112 SDMMC0_CLK Out float SD card Clock
113 GND Power / System Ground(0V) 114 GND Power / System Ground(0V)
115 MIPI_RX0_D3N In float MIPI CSI0 negative differential data line 116 MIPI_TX1/RX1_D0N In/Out float MIPI CSI1/DSI1 negative differential data line
117 MIPI_RX0_D3P In float MIPI CSI0

positive differential data line

118 MIPI_TX1/RX1_D0P In/Out float MIPI CSI1/DSI1

positive differential data line

119 GND Power / System Ground(0V) 120 GND Power / System Ground(0V)
121 MIPI_RX0_D2N In float MIPI CSI0 negative differential data line 122 MIPI_TX1/RX1_D1N In/Out float MIPI CSI1/DSI1 negative differential data line
123 MIPI_RX0_D2P In float MIPI CSI0

positive differential data line

124 MIPI_TX1/RX1_D1P In/Out float MIPI CSI1/DSI1

positive differential data line

125 GND Power / System Ground(0V) 126 GND Power / System Ground(0V)
127 MIPI_RX0_CLKN In float MIPI CSI0 negative differential clock line 128 MIPI_TX1/RX1_CLKN In/Out float MIPI CSI1/DSI1 negative differential clock line
129 MIPI_RX0_CLKP In float MIPI CSI0

positive differential clock line

130 MIPI_TX1/RX1_CLKP In/Out float MIPI CSI1/DSI1

positive differential clock line

131 GND Power / System Ground(0V) 132 GND Power / System Ground(0V)
133 MIPI_RX0_D1N In float MIPI CSI0 negative differential data line 134 MIPI_TX1/RX1_D2N In/Out float MIPI CSI1/DSI1 negative differential data line
135 MIPI_RX0_D1P In float MIPI CSI0

positive differential data line

136 MIPI_TX1/RX1_D2P In/Out float MIPI CSI1/DSI1

positive differential data line

137 GND Power / System Ground(0V) 138 GND Power / System Ground(0V)
139 MIPI_RX0_D0N In float MIPI CSI0 negative differential data line 140 MIPI_TX1/RX1_D3N In/Out float MIPI CSI1/DSI1 negative differential data line
141 MIPI_RX0_D0P In float MIPI CSI0

positive differential data line

142 MIPI_TX1/RX1_D3P In/Out float MIPI CSI1/DSI1

positive differential data line

143 GND Power / System Ground(0V) 144 GND Power / System Ground(0V)
Connector Key Connector Key
145 HDMI_CEC In/Out float HDMI CEC signal, 3V level 146 GND Power / System Ground(0V)
147 HDMI_HPD In float HDMI hot plug 148 MIPI_TX0_D3N Out float MIPI DSI0 negetive differential data line
149 GND Power / System Ground(0V) 150 MIPI_TX0_D3P Out float MIPI DSI0 positive differential data line
151 HDMI_TXCN Out float HDMI differential clock line negative 152 GND Power / System Ground(0V)
153 HDMI_TXCP Out float HDMI differential clock line positive 154 MIPI_TX0_D2N Out float MIPI DSI0 negetive differential data line
155 GND Power / System Ground(0V) 156 MIPI_TX0_D2P Out float MIPI DSI0 positive differential data line
157 HDMI_TX0N Out float HDMI differential data line negative 158 GND Power / System Ground(0V)
159 HDMI_TX0P Out float HDMI differential data line positive 160 MIPI_TX0_CLKN Out float MIPI DSI0 negetive differential clock line
161 GND Power / System Ground(0V) 162 MIPI_TX0_CLKP Out float MIPI DSI0 positive differential clock line
163 HDMI_TX1N Out float HDMI differential data line negative 164 GND Power / System Ground(0V)
165 HDMI_TX1P Out float HDMI differential data line positive 166 MIPI_TX0_D1N Out float MIPI DSI0 negetive differential data line
167 GND Power / System Ground(0V) 168 MIPI_TX0_D1P Out float MIPI DSI0 positive differential data line
169 HDMI_TX2N Out float HDMI differential data line negative 170 GND Power / System Ground(0V)
171 HDMI_TX2P Out float HDMI differential data line positive 172 MIPI_TX0_D0N Out float MIPI DSI0 negetive differential data line
173 GND Power / System Ground(0V) 174 MIPI_TX0_D0P Out float MIPI DSI0 positive differential data line
175 USB3.0/TYPE-C1_DP In/Out float TYPEC1 USB 2.0 data+ 176 GND Power / System Ground(0V)
177 USB3.0/TYPE-C1_DM In/Out float TYPEC1 USB 2.0 data- 178 PCIE_RX3_N In float PCIe negative differential data line
179 GND Power / System Ground(0V) 180 PCIE_RX3_P In float PCIe positive differential data line
181 USB3.0/TYPEC1_TX1P Out float TYPEC1 USB3.0 PHY0 SuperSpeed TX1P 182 GND Power / System Ground(0V)
183 USB3.0/TYPEC1_TX1M Out float TYPEC1 USB3.0 PHY0 SuperSpeed TX1M 184 PCIE_TX3N Out float PCIe negative differential data line
185 GND Power / System Ground(0V) 186 PCIE_TX3P Out float PCIe positive differential data line
187 USB3.0/TYPEC1_RX1P In float TYPEC1 USB3.0 PHY0 SuperSpeed RX1P 188 GND Power / System Ground(0V)
189 USB3.0/TYPEC1_RX1M In float TYPEC1 USB3.0 PHY0 SuperSpeed RX1M 190 PCIE_RX2_N In float PCIe negative differential data line
191 GND Power / System Ground(0V) 192 PCIE_RX2_P In float PCIe positive differential data line
193 TYPEC1_TX2P Out float TYPEC1 USB3.0 PHY0 SuperSpeed TX2P 194 GND Power / System Ground(0V)
195 TYPEC1_TX2M Out float TYPEC1 USB3.0 PHY0 SuperSpeed TX2M 196 PCIE_TX2N Out float PCIe negative differential data line
197 GND Power / System Ground(0V) 198 PCIE_TX2P Out float PCIe positive differential data line
199 TYPEC1_RX2P In float TYPEC1 USB3.0 PHY0 SuperSpeed RX2P 200 GND Power / System Ground(0V)
201 TYPEC1_RX2M In float TYPEC1 USB3.0 PHY0 SuperSpeed RX2M 202 PCIE_RX1_N In float PCIe negative differential data line
203 GND Power / System Ground(0V) 204 PCIE_RX1_P In float PCIe positive differential data line
205 TYPEC1_SBU1 In/Out float TYPEC1 SBU1 206 GND Power / System Ground(0V)
207 TYPEC1_SBU2 In/Out float TYPEC1 SBU2 208 PCIE_TX1N Out float PCIe negative differential data line
209 GND Power / System Ground(0V) 210 PCIE_TX1P Out float PCIe positive differential data line
211 TYPEC1_SBU1_DC Out float TYPEC1 SBU1 DC Bias 212 GND Power / System Ground(0V)
213 TYPEC1_SBU2_DC Out float TYPEC1 SBU2 DC Bias 214 PCIE_RX0_N In float PCIe negative differential data line
215 TYPEC1_U2VBUSDET In float TYPEC1 Vbus detect 216 PCIE_RX0_P In float PCIe positive differential data line
217 GND Power / System Ground(0V) 218 GND Power / System Ground(0V)
219 HOST0_DP In/Out float USB 2.0 Host0 data+ 220 PCIE_TX0N Out float PCIe negative differential data line
221 HOST0_DM In/Out float USB 2.0 Host0 data- 222 PCIE_TX0P Out float PCIe positive differential data line
223 GND Power / System Ground(0V) 224 GND Power / System Ground(0V)
225 HOST1_DP In/Out float USB 2.0 Host1 data+ 226 PCIE_REF_CLKN Out float PCIe negative differential reference clock line
227 HOST1_DM In/Out float USB 2.0 Host1 data- 228 PCIE_REF_CLKP Out float PCIe positive differential reference clock line
229 GND Power / System Ground(0V) 230 GND Power / System Ground(0V)
231 EDP_TX3N Out float eDP data line negative 232 LAN_LED0_BLINK Out float 10/100/1000M Ethernet Status LED0
233 EDP_TX3P Out float eDP data line positive 234 LAN_LED1_LINK Out float 10/100/1000M Ethernet Status LED1
235 GND Power / System Ground(0V) 236 GND Power / System Ground(0V)
237 EDP_TX2N Out float eDP data line negative 238 MDI3- In/Out float 10/100/1000M Ethernet MDI3-
239 EDP_TX2P Out float eDP data line positive 240 MDI3+ In/Out float 10/100/1000M Ethernet MDI3+
241 GND Power / System Ground(0V) 242 GND Power / System Ground(0V)
243 EDP_TX1N Out float eDP data line negative 244 MDI2- In/Out float 10/100/1000M Ethernet MDI2-
245 EDP_TX1P Out float eDP data line positive 246 MDI2+ In/Out float 10/100/1000M Ethernet MDI2+
247 GND Power / System Ground(0V) 248 GND Power / System Ground(0V)
249 EDP_TX0N Out float eDP data line negative 250 MDI1- In/Out float 10/100/1000M Ethernet MDI1-
251 EDP_TX0P Out float eDP data line positive 252 MDI1+ In/Out float 10/100/1000M Ethernet MDI1+
253 GND Power / System Ground(0V) 254 GND Power / System Ground(0V)
255 EDP_AUXP In/Out float eDP AUX line positive 256 MDI0- In/Out float 10/100/1000M Ethernet MDI0-
257 EDP_AUXN In/Out float eDP AUX line negative 258 MDI0+ In/Out float 10/100/1000M Ethernet MDI0+
259 GND Power / System Ground(0V) 260 GND Power / System Ground(0V)
  • 按键
    • 三个按键分别是电源按键, 系统还原和复位。此3个按键相应的信号也存在于260Pin金手指上。
  • LED
    • 一个红色的电源LED和一个绿色的状态LED
  • USB Type-C接口
    • 一个全功能USB-C接口，支持DP，支持USB2.0和USB3.0数据传输，可向外输出5V/2A电源，但不可外接电源给板子供电。支持DRP和安卓ADB调试。因为USB3.0模式下不支持ADB，所以，当使用ADB功能时，请连接到PC的USB2.0端口，或使用只具备USB2.0功能的数据线连接板子和PC。
    • 另外一个USB Type-C 5V_IN接口只有给板子供电的功能，用于不接底板快速测试板子。
  • 电源输入
    • 支持从金手指和USB Type-C 5V_IN接口给核心板供电，支持5V到20V宽电压输入，推荐12V。我们运行安兔兔测试程序时，测量到的最大功耗是10.8W， 建议按12W设计。
    • 设计底板时，建议在电源输入处添加100uF/16V,或100uF/35V电解电容， 以减少电源振铃和提供瞬态电流。

5 参考底板

SOM-RK3399 Dev Kit 1904-01B.jpg

6 Link to Rockchip Resources

7 原理图, PCB图

Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=SOM-RK3399/zh&oldid=19366"