Difference between revisions of "NanoPi M4 SATA HAT"

Revision as of 02:14, 15 May 2019

Back

SATA
- Use Marvell 88SE9215 Four-Port 6 Gbps SATA I/O Controller
- Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps
- One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents
- Four LEDs for indicating the status of each sata port
Power
- Two 12V Power Input options. It includes a 5.5*2.1mm DC-Jack and a 5566-04A connector
- The output current of the 12V to 5V DC/DC regulator is up to 8A
- One PowerKey button and PowerKey jumper
USB
- Two 4-PIN PH2.0 USB 2.0 host connectors.
Heat dissipation
- Two PCB nuts for mounting a heatsink above the PCIe to SATA brigde
- One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
GPIO
- ALL the signals of the NanoPi M4's 40-PIN connector are populated
About Power Supply
- To drive one or two hard disk, We recommend our 12V 2A Universal Power Adapter https://www.friendlyarm.com/index.php?route=product/product&path=73&product_id=233
- To drive four hard disk, We recommend PC Power

Overview

Front

Back

Revision as of 02:13, 15 May 2019 (view source) Yonganch (Talk \| contribs) (→‎Features) ← Older edit		Revision as of 02:14, 15 May 2019 (view source) Yonganch (Talk \| contribs) (→‎Resources) Newer edit →
Line 25:		Line 25:

	==Resources==		==Resources==
−	* 2D CAD file [http://wiki.friendlyarm.com/wiki/~~index.php~~/~~File:%E5%88%9B%E5%AE%A2%E7%A7%98%E7%B1%8D~~.~~pdf Hacker's Book in Chinese by FriendlyARM~~]	+	* 2D CAD file [http://wiki.friendlyarm.com/wiki/images/3/32/M4_SATA_HAT_2D_DWG.zip M4_SATA_HAT_2D_DWG.zip]