Difference between revisions of "Template:BurnLinuxToSD-Allwinner"
From FriendlyELEC WiKi
(→Boot from TF) |
(updated by API) |
||
| Line 9: | Line 9: | ||
* FriendlyCore / Debian / Ubuntu are all based on a same Linux distribution and their installation methods are the same. | * FriendlyCore / Debian / Ubuntu are all based on a same Linux distribution and their installation methods are the same. | ||
* Extract the Linux image and win32diskimager.rar files. Insert a TF card(at least 8G) into a Windows PC and run the win32diskimager utility as administrator. On the utility's main window select your TF card's drive, the wanted image file and click on "write" to start flashing the TF card. | * Extract the Linux image and win32diskimager.rar files. Insert a TF card(at least 8G) into a Windows PC and run the win32diskimager utility as administrator. On the utility's main window select your TF card's drive, the wanted image file and click on "write" to start flashing the TF card. | ||
| + | {{#switch: {{{1}}} | ||
| + | | NanoPi-R1 = | ||
| + | 这里nanopi-r1_sd_openwrt_4.14_armhf_YYYYMMDD.img.zip为例，其他系统的烧写操作是类似的，烧写时的界面如下：<br> | ||
| + | [[File:win32disk-burn.jpg|frameless|600px|win32disk-burn]]<br> | ||
| + | }} | ||
| + | 成功烧写后，会看到如下界面：<br> | ||
| + | [[File:win32disk-finish.jpg|frameless|600px|win32disk-finish]]<br> | ||
| + | |||
* Insert this card into your board's BOOT slot and power on (with a 5V/2A power source). If the PWR LED is on and the STAT LED is blinking this indicates your board has successfully booted.<br/> | * Insert this card into your board's BOOT slot and power on (with a 5V/2A power source). If the PWR LED is on and the STAT LED is blinking this indicates your board has successfully booted.<br/> | ||
}} | }} | ||
Revision as of 06:12, 15 April 2019
1 Linux
1.1 Boot from TF
- FriendlyCore / Debian / Ubuntu are all based on a same Linux distribution and their installation methods are the same.
- Extract the Linux image and win32diskimager.rar files. Insert a TF card(at least 8G) into a Windows PC and run the win32diskimager utility as administrator. On the utility's main window select your TF card's drive, the wanted image file and click on "write" to start flashing the TF card.
成功烧写后，会看到如下界面：
- Insert this card into your board's BOOT slot and power on (with a 5V/2A power source). If the PWR LED is on and the STAT LED is blinking this indicates your board has successfully booted.
