Difference between revisions of "NanoPi M4 SATA HAT"
From FriendlyELEC WiKi
(→Features) |
|||
| Line 4: | Line 4: | ||
[[File:NanoPi_M4_SATA_HAT-B01.jpg||thumb|Back]] | [[File:NanoPi_M4_SATA_HAT-B01.jpg||thumb|Back]] | ||
* '''SATA''' | * '''SATA''' | ||
| − | ** Four Sata Ports | + | ** Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps |
| − | ** One 4-Pin power connector | + | ** One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents |
| − | ** Four LEDs for | + | ** Four LEDs for indicating the status of each sata port |
* '''Power''' | * '''Power''' | ||
| − | ** Two 12V Power Input options | + | ** Two 12V Power Input options. It includes a DC-Jack and a 5566-04A connector |
| − | ** | + | ** The output current of the 12V to 5V DC/DC regulator is up to 8A |
** One PowerKey button and PowerKey jumper | ** One PowerKey button and PowerKey jumper | ||
* '''USB''' | * '''USB''' | ||
| − | ** Two 4-PIN PH2.0 USB 2.0 host | + | ** Two 4-PIN PH2.0 USB 2.0 host connectors. |
* '''Heat dissipation''' | * '''Heat dissipation''' | ||
| − | ** Two PCB nuts for mounting heatsink above the PCIe to SATA brigde | + | ** Two PCB nuts for mounting a heatsink above the PCIe to SATA brigde |
| − | ** One 2-PIN PH2.0 connector for fan. 12V output | + | ** One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1 |
* '''GPIO''' | * '''GPIO''' | ||
| − | ** ALL the signals | + | ** ALL the signals of the NanoPi M4's 40-PIN connector are populated |
Revision as of 04:34, 18 February 2019
Features
- SATA
- Four Sata Ports. It supports three communication rates: 6 Gbps, 3 Gbps, and 1.5 Gbps
- One 4-Pin power connector. It includes a 12V and a 5V outputs and is able to carry large currents
- Four LEDs for indicating the status of each sata port
- Power
- Two 12V Power Input options. It includes a DC-Jack and a 5566-04A connector
- The output current of the 12V to 5V DC/DC regulator is up to 8A
- One PowerKey button and PowerKey jumper
- USB
- Two 4-PIN PH2.0 USB 2.0 host connectors.
- Heat dissipation
- Two PCB nuts for mounting a heatsink above the PCIe to SATA brigde
- One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
- GPIO
- ALL the signals of the NanoPi M4's 40-PIN connector are populated
