Difference between revisions of "LCD-HD702V"
From FriendlyELEC WiKi
(→LCD HD702V LVDS interface Pin Spec) |
(→LCD HD702V LVDS interface Pin Spec) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 29: | Line 29: | ||
|12 || GND || Power and Signal ground || | |12 || GND || Power and Signal ground || | ||
|- | |- | ||
| − | |13 || LVDS_CLK- || Data IN || | + | |13 || LVDS_CLK- || Data Clock IN || |
|- | |- | ||
| − | |14 || LVDS_CLK+|| Data IN || | + | |14 || LVDS_CLK+|| Data Clock IN || |
|- | |- | ||
|15 || GND || Power and Signal ground || | |15 || GND || Power and Signal ground || | ||
| Line 43: | Line 43: | ||
|19 || /NC || || | |19 || /NC || || | ||
|- | |- | ||
| − | |20 || TP_RST_P || Control IO IN || Touch reset, active | + | |20 || TP_RST_P || Control IO IN || Touch reset, active hight，pulled to GND or float if not used |
|- | |- | ||
|21 || I2C_SCL || Data clock IN || I2C clock, for touch and backlight control | |21 || I2C_SCL || Data clock IN || I2C clock, for touch and backlight control | ||
| Line 53: | Line 53: | ||
|24 || GND || Power and Signal ground || | |24 || GND || Power and Signal ground || | ||
|} | |} | ||
| + | |||
| + | Schematic：http://wiki.friendlyarm.com/wiki/images/c/c0/LCD-HD702V-1812.pdf | ||
Latest revision as of 03:33, 28 January 2019
LCD HD702V LVDS interface Pin Spec
Connector type : 24Pin 0.5mm pitch FPC
Pin# Name Type Description 1 VDD_5V Power IN 5V Power input， 4.7 to 5.5V 2 VDD_5V Power IN 5V Power input， 4.7 to 5.5V 3 VDD_5V Power IN 5V Power input， 4.7 to 5.5V 4 LVDS_D0- Data IN 5 LVDS_D0+ Data IN 6 GND Power and Signal ground 7 LVDS_D1- Data IN 8 LVDS_D1+ Data IN 9 GND Power and Signal ground 10 LVDS_D2- Data IN 11 LVDS_D2+ Data IN 12 GND Power and Signal ground 13 LVDS_CLK- Data Clock IN 14 LVDS_CLK+ Data Clock IN 15 GND Power and Signal ground 16 LVDS_D3- Data IN 17 LVDS_D3+ Data IN 18 GND Power and Signal ground 19 /NC 20 TP_RST_P Control IO IN Touch reset, active hight，pulled to GND or float if not used 21 I2C_SCL Data clock IN I2C clock, for touch and backlight control 22 I2C2_SDA Data IN/OUT I2C data, for touch and backlight control 23 TP_INT Control IO OUT Touch interrupt, active low 24 GND Power and Signal ground
Schematic：http://wiki.friendlyarm.com/wiki/images/c/c0/LCD-HD702V-1812.pdf
