Difference between revisions of "Matrix - MCAM400"
From FriendlyELEC WiKi
(→Sensor Spec) |
(→Lens Spec) |
||
| Line 24: | Line 24: | ||
* Focal Length: 3.3 mm | * Focal Length: 3.3 mm | ||
* Aperture： F2.2 | * Aperture： F2.2 | ||
| − | * MAX FOV： | + | * MAX FOV： 135℃ |
| − | * H/V FOV: | + | * H/V FOV: 180℃(H), 80℃(V) |
* TV Distortion : < 15% | * TV Distortion : < 15% | ||
* Focusing distance ： 2cm to infinity | * Focusing distance ： 2cm to infinity | ||
Revision as of 09:18, 11 December 2018
Contents
1 Introduction
- The MCAM400 module uses Omni Vision's 4MP CMOS OV4689 image sensor. It has MIPI output interface and supports up to 2688 x 1520 photographing and 1920x1080@120fps video recording.
2 Features
- Omnivision OV4689 4M pixels Sensor
- 4-lane MIPI interface
- M12 lens
- Module Size: 38mm x 38mm
3 Sensor Spec
- Sensor size: 1/3"
- Active pixels: 2688H x 1520V
- Pixel size: 2.0 um x 2.0 um
- Output format: 10-bit RAW RGB
- Max S/N ratio: 38.3dB
- Dynamic range：64.6dB@1xgain
- Sensitivity: 1900mv/lux-sec
4 Lens Spec
- Focal Length: 3.3 mm
- Aperture： F2.2
- MAX FOV： 135℃
- H/V FOV: 180℃(H), 80℃(V)
- TV Distortion : < 15%
- Focusing distance ： 2cm to infinity
- Optical Structure: 4G+IR CUT
- Thread Size：M12x0.5
- Barrel Material： Aluminium Alloy
5 Drawing
6 MIPI interface Pin Spec
Connector type : 0.5mm pitch FPC
Pin# MIPI-CSI1 Description 1 VDD_5V 5V Power input 2 VDD_5V 5V Power input 3 GND Return current path 4 /NC no connection 5 /NC no connection 6 VCC_IO power and reference level for I2C, PWDN, XSHUTDOWN circuit, 1.8V type 7 /NC no connection 8 /NC no connection 9 I2C_SCL I2C clock signal 10 I2C_SDA I2C data signal 11 XSHUTDOWN XSHUTDOWN signal of OV4689 , connect to GPIO 12 /NC no connection 13 GND Return current path 14 EXTCLK EXTCLK to OV4689 15 GND Return current path 16 MIPI_D3P MIPI TX data lane 3 positive output 17 MIPI_D3N MIPI TX data lane 3 negative output 18 GND Return current path 19 MIPI_D2P MIPI TX data lane 2 positive output 20 MIPI_D2N MIPI TX data lane 2 negative output 21 GND Return current path 22 MIPI_D1P MIPI TX data lane 1 positive output 23 MIPI_D1N MIPI TX data lane 1 negative output 24 GND Return current path 25 MIPI_CLKP MIPI TX clock lane positive output 26 MIPI_CLKN MIPI TX clock lane negative output 27 GND Return current path 28 MIPI_D0P MIPI TX data lane 0 positive output 29 MIPI_D0N MIPI TX data lane 0 negative output 30 GND Return current path
