View source for NanoPi R6C

[[NanoPi R6C/zh|查看中文]]
==Introduction==
[[File:NanoPi_R6C_A01.jpg|thumb|Overview]]
[[File:NanoPi_R6C_A02.jpg|thumb|Front]]
[[File:NanoPi_R6C_A03.jpg|thumb|Back]]
[[File:NanoPi_R6C_01.jpg|thumb|frameless|250x250px|Case]]
[[File:NanoPi_R6C_02.jpg|thumb|frameless|250x250px|Case]]
[[File:NanoPi_R6C_03.jpg|thumb|frameless|250x250px|Case]]
[[File:NanoPi_R6C_04.jpg|thumb|frameless|250x250px|Case]]
The NanoPi R6C (as “R6C”) is an open-sourced mini IoT gateway device with one 2.5G and one Gbps Ethernet ports, designed and developed by FriendlyElec.It is integrated with a Rockchip RK3588S CPU, 4GB/8GB LPDDR4x RAM, and 32GB eMMC flash or none. It supports booting with TF cards and works with operating systems such as FriendlyWrt, Android, Debian, Ubuntu etc and works with headless systems as well.<br/><br/>
The NanoPi R6C has rich hardware resources with a compact size of 90 x 62 mm, a 30-pin header is provided to expose hardware resources for secondary development, including interfaces such as GPIO, I2C, I2S, PWM and SPI, It alsa has one HDMI port. It supports decoding 8K@60fps H.265/VP9 and 8K@30fps H.264 formatted videos.  <br/><br/>
The NanoPi R6C has one M.2 NVME port and two USB ports, and supports USB type-C power delivery. It is an ideal portable drive for saving images and videos. FriendlyElec has released a carefully-designed custom CNC housing for it.<br/><br/>
All in all, the NanoPi R6C is a board featured with multiple Ethernet ports, light NAS and video playing. It is a cannot-miss platform with infinite possibilities for geeks, fans and developers.
==Hardware Spec==
* SoC: Rockchip RK3588S
** CPU: Quad-core ARM Cortex-A76(up to 2.4GHz) and quad-core Cortex-A55 CPU (up to 1.8GHz)
** GPU: Mali-G610 MP4, compatible with OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan1.2
** VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, 4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder
** NPU: 6TOPs, supports INT4/INT8/INT16/FP16
* RAM: 64-bit 4GB/8GB LPDDR4X at 2133MHz
* Flash: 32GB/None eMMC, at HS400 mode
* Ethernet: one Native Gigabit Ethernet, and one PCIe 2.5G Ethernet
* USB: one USB 3.0 Type-A and one USB 2.0 Type-A
* PCIe: one M.2 Key M connector with PCIe 2.1 x1
* HDMI: 
** compatible with HDMI2.1, HDMI2.0, and HDMI1.4 operation
** support up to 7680x4320@60Hz
** Support RGB/YUV(up to 10bit) format
* microSD: support up to SDR104 mode
* GPIO: 
** 30-pin 2.54mm header connector
** up to 1x SPI, 3x UARTs, 3x I2Cs, 2x SPDIFs, 1x I2Ss, 3x PWMs, 20x GPIOs
* Debug: UART via 3-Pin 2.54mm header, or on-board USB-C to UART
* LEDs: 4 x GPIO Controlled LED (SYS, WAN, LAN, LED1)
* others: 
** 2 Pin 1.27/1.25mm RTC battery input connector for low power RTC IC HYM8563TS
** MASK button for eMMC update
** one user button
* Power supply: USB-C, support PD, 5V/9V/12V/20V input
* PCB: 8 Layer, 62x90x1.6mm
*Ambient Operating Temperature: 0℃ to 70℃

==Diagram, Layout and Dimension==
===Layout===
[[File:NanoPi R6C Layout.jpg |thumb|600px|NanoPi R6C Layout]]
* '''30-pin GPIO'''
::{| class="wikitable"
|- 
|'''Pin#''' || '''Assignment'''                                || '''Pin#'''     || '''Assignment'''  
|-
| 1         ||  VCC_3V3_S3*                                      || 2              ||  VCC_5V0*          
|-
| 3         || I2C8_SDA_M2                                      || 4              ||  VCC_5V0*          
|- 
| 5         || I2C8_SCL_M2                                      || 6              || GND
|- 
| 7         || GPIO4_A0/I2S1_MCLK_M0                           || 8              || GPIO3_C4/UART5_TX_M1
|-
| 9         ||  GND                                            || 10              || GPIO3_C5/UART5_RX_M1
|-
| 11         || GPIO4_A1/I2S1_SCLK_M0                          || 12              || GPIO0_D4/PWM3_IR_M0
|-
| 13         || GPIO4_A2/I2S1_LRCK_M0                          || 14              || GND
|-
| 15         || GPIO4_A5/I2S1_SDI0_M0                          || 16              || GPIO4_A6/I2S1_SDI1_M0
|-
| 17         || VCC_3V3_S3*                                     || 18              || GPIO4_B1/I2S1_SDO0_M0
|-
| 19         || GPIO1_B2/SPI0_MOSI_M2/UART4_RX_M2              || 20              || GND
|-
| 21         ||GPIO1_B1/SPI0_MISO_M2                           || 22              || GPIO4_B2/I2S1_SDO1_M0
|-
| 23         || GPIO1_B3/SPI0_CLK_M2/UART4_TX_M2               || 24              || GPIO1_B4/SPI0_CS0_M2
|-
| 25         ||  GND                                           || 26              || GPIO1_A2/PWM0_M2/I2C4_SDA_M3
|-
|27         ||  GPIO1_B6/UART1_TX_M1/I2C5_SCL_M3/SPDIF0_TX_M0  || 28              || GPIO1_B7/UART1_RX_M1/I2C5_SDA_M3/SPDIF1_TX_M0
|-
| 29         ||  GPIO1_A3/PWM1_M2/I2C4_SCL_M3                  || 30              || GND
|}
::The logic level of all signals is 3.3V.
::VCC_3V3_S3 is 3.3V output with a maximum output of 500mA.
::VCC_5V0 is 5V output with a maximum output of 1A.

* '''Debug UART Pin Spec'''
:: 3.3V level signals, 1500000bps
::{| class="wikitable"
|-
|'''Pin#''' ||'''Assignment''' ||   '''Description '''   
|-
|1    || GND                    || 0V
|- 
|2   || UART2_TX_M0_DEBUG       || output
|-
|3   || UART2_RX_M0_DEBUG       || intput
|}

*'''USB-C Debug Port'''
::This is a usb to serial port, connected to the Debug UART. Just plug and use.
::Windows driver: http://www.wch-ic.com/downloads/CH341SER_ZIP.html

*'''USB-A Port'''
:: Each USB Type-A port has 1.4A overcurrent protection.

*'''RTC'''
::RTC backup current is 0.25μA TYP (VDD =3.0V, TA =25℃).
::Connector P/N: Molex 53398-0271

*'''User Button'''
::User Button is connected to GPIO1_C0, and is active-low.

==Get Started==
===Essentials You Need===
Before starting to use your NanoPi-R6C get the following items ready
* NanoPi-R6C
* MicroSD Card/TF Card: Class 10 or Above, minimum 8GB SDHC
* USB C PD Charger (10W & above)
* If you need to develop and compile,you need a computer that can connect to the Internet. It is recommended to install Ubuntu 20.04 64-bit system and use the following script to initialize the development environment, or use docker container: <br />
**[https://github.com/friendlyarm/build-env-on-ubuntu-bionic How to setup the Compiling Environment on Ubuntu bionic]<br />
**[https://github.com/friendlyarm/docker-cross-compiler-novnc docker-cross-compiler-novnc]<br />
===TF Cards We Tested===
Refer to： [[Template:TFCardsWeTested/zh|TFCardsWeTested]]
===PD Power Adapters We Tested===
Refer to： [[Template:PDPowerWeTested|PD Power Adapters We Tested]]
{{OnboardUSBSerialPortDebugSetting}}
===Install OS===
{{Downloads-RK3588|NanoPi-R6C}}
{{BurnLinuxToSD-Rockchip|NanoPi-R6C}}
{{BurnLinuxToEMMC-Rockchip|NanoPi-R6C}}
{{BurnLinuxToExtDrive-Rockchip|NanoPi-R6C}}
{{FriendlyWrt21|NanoPi-R6C}}
==Work with Ubuntu 22.04 Desktop==
===Introduction to Ubuntu 22.04 Desktop===
{{UbuntuJammyDesktop-Intro|NanoPi-R6C}}
{{UbuntuJammyDesktop-Common|NanoPi-R6C}}
{{UbuntuJammyDesktop-WithHDMI|NanoPi-R6C}}
{{Android12|NanoPi-R6C}}
==Work with Debian11 Desktop==
===Introduction to Debian11 Desktop===
{{DebianBullseyeDesktop-XFCE-Intro|NanoPi-R6C}}
{{DebianBullseyeDesktop-XFCE-Common|NanoPi-R6C}}
{{DebianBullseyeDesktop-XFCE-WithHDMI|NanoPi-R6C}}
==Work with Debian10 Desktop==
* Refer to：
** [[Debian Buster Desktop|Debian Buster]]
{{OfficialUbuntuCore|NanoPi-R6C}}
{{FriendlyCoreRemoveQt}}
==How to Compile==
{{Rockchip-DevEnv|NanoPi-R6C}}
{{RK3588-BuildFromSource|NanoPi-R6C}}
{{RK3588-HWAccess|NanoPi-R6C}}
{{RockchipMiscCustome|RK3588}}
{{Template:How to Initialize and Format New SSD And HDD|NanoPi-R6C}}
{{RockchipCommonLinuxTips|rk3588}}
{{RockchipUnbrick|NanoPi-R6C}}
==Link to Rockchip Resources==
{{LinkToRockchipResources|NanoPi-R6C}}
==Schematic, PCB CAD File==
*Schematic:  [https://wiki.friendlyelec.com/wiki/images/f/f7/NanoPi_R6C_2302_SCH.PDF NanoPi_R6C_2302_SCH.PDF]
*PCB CAD File：[https://wiki.friendlyelec.com/wiki/images/9/91/NanoPi_R6C_2302_2d_dxf.zip NanoPi_R6C_2302_2d_dxf.zip]

==Update Logs==
{{RK3588-UpdateLog|NanoPi-R6C}}