View source for NanoPi R1S-H3

[[NanoPi R1S-H3/zh|查看中文]]

==Introduction==
[[File:NanoPi R1S-1.jpg|thumb|frameless|250x250px|Overview]]
[[File:NanoPi R1S-H3_TOP.jpg|thumb|frameless|250x250px|Front]]
[[File:NanoPi R1S-H3-BOT.jpg|thumb|frameless|250x250px|Back]]
[[File:NanoPi R1S-case1.jpg|thumb|frameless|250x250px|Case]]
* The NanoPi R1S(as "R1S")is an open source IoT ARM board designed and developed by FriendlyElec for hobbyists, makers and developers.
* The NanoPi R1S has two Gbps Ethernet ports, an onboard 2.4G Wi-Fi module. FriendlyElec ported OpenWrt for the NanoPi R1S. By applying some simple configurations it will work as a router.

==Hardware Spec==
* CPU: Allwinner H3, Quad-core Cortex-A7
* DDR3 RAM: 512MB           
* Network：
**10/100/1000M Ethernet Port x 1
**USB2.0转10/100/1000M Ethernet Port x 1<br />
* Wi-Fi: 802.11b/g/n with IPX antenna interface(first generation, the interface's diameter is 2.0mm)
* USB Host: Type-A x1
* MicroSD Slot x 1
* MicroUSB: power supply and slave
* Debug Serial Port: 3.3V TTL, 3Pin 2.54mm pitch pin-header
* LED: LED x 3
* KEY: KEY x 1 , user programmable
* PC Size: 55.6 x 52mm
* Power Supply: DC 5V/2A
* Temperature measuring range: -20℃ to 70℃
* OS/Software: U-boot，Ubuntu-Core，OpenWrt
<br />
* '''Verified Rate'''
::{| class="wikitable" 
|-
! width=80px style="background: Light grey; color: black" | 
! width=300px style="background: Light grey; color: black" align="center" | TX 
! width=300px style="background: Light grey; color: black" align="center" | RX           
|-
|WAN       ||align="center" | 672 Mbps  ||align="center" |  930 Mbps  
|-
|LAN       ||align="center" | 320 Mbps  ||align="center" |  334 Mbps  
|- 
|WiFi-2.4G ||align="center" | 84 Mbps   ||align="center" |  76.6 Mbps  
|- 
|Notes：   ||colspan="2" |  1. test utility:iperf <br />  2. use indepedent IP address section and test with a PC in simplex communication mode
|}

==Diagram, Layout and Dimension==
===Layout===
[[File:NanoPi R1S-H3-layout.jpg |frameless|600px|NanoPi R1S-H3 Layout]]
:For more details refer to the document:[http://wiki.friendlyelec.com/wiki/images/4/4c/NanoPi_R1S-H3_H5-V1.0-1908.pdf NanoPi_R1S_V1.0_1908-Schematic.pdf]
:For more details refer to: [http://wiki.friendlyelec.com/wiki/index.php/File:NanoPi_R1S_V1.0_1908_20191104.rar NanoPi R1S PCB file in dxf format]

==Get Started==
===Essentials You Need===
Before starting to use your NanoPi R1S-H3 get the following items ready
* NanoPi R1S-H3
* MicroSD Card/TF Card: Class 10 or Above, minimum 8GB SDHC
* MicroUSB 5V/2A power adapter
* A host computer running Ubuntu 18.04 64-bit system

{{TFCardsWeTested}}

===Install OS===
====Download Image Files====
Go to [http://download.friendlyelec.com/nanopir1sh3 download link]to download the image files under the officail-ROMs directory and the flashing utility under the tools directory:<br />
::{| class="wikitable"
|-
|colspan=2|Image Files:
|-
|nanopi-r1s-h3_sd_friendlycore-xenial_4.14_armhf_YYYYMMDD.img.zip || Based on UbuntuCore and Linux-4.14 Kernel
|-
|nanopi-r1s-h3_sd_friendlywrt_4.14_armhf_YYYYMMDD.img.zip || Based on OpenWrt and Linux-4.14 Kernel
|-
|colspan=2|Flashing Utility:  
|-
|win32diskimager.rar || Windows utility. Under Linux users can use "dd"
|- 
|}
{{BurnOS-Allwinner|NanoPi-R1S-H3}}
{{OpenWrt1|NanoPi-R1S-H3}}
{{FriendlyCoreGeneral|NanoPi-R1S-H3}}
{{FriendlyCoreAllwinnerH3|NanoPi-R1S-H3}}
{{NetworkPerformanceTest|NanoPi-R1S-H3}}
{{DeveloperGuildH3|NanoPi-R1S-H3}}
{{MoreOS}}
==Resources==
===Schematics and Datasheets===
* Schematics
** [http://wiki.friendlyelec.com/wiki/images/4/4c/NanoPi_R1S-H3_H5-V1.0-1908.pdf NanoPi_R1S_V1.0_1908-Schematic.pdf]

* Dimensional Diagram
** [http://wiki.friendlyelec.com/wiki/index.php/File:NanoPi_R1S_V1.0_1908_20191104.rar NanoPi_R1S_V1.0_1908 PCB file in dxf format]

* H3 datasheet [http://wiki.friendlyelec.com/wiki/images/4/4b/Allwinner_H3_Datasheet_V1.2.pdf Allwinner_H3_Datasheet_V1.2.pdf]

{{H3ChangeLog|NanoPi-R1S-H3}}