View source for NanoPi R3S

[[NanoPi R3S/zh|查看中文]]

==Introduction==
[[File:NanoPi R3S-1.jpg|thumb|frameless|250x250px|Overview]]
[[File:NanoPi R3S_TOP.jpg|thumb|frameless|250x250px|Front]]
[[File:NanoPi R3S-BOT.jpg|thumb|frameless|250x250px|Back]]
[[File:NanoPi_R3S-case1.jpg|thumb|frameless|250x250px|Case]]
[[File:R3sc-02.jpg|thumb|frameless|250x250px|Case]]
[[File:R3sc-03.jpg|thumb|frameless|250x250px|Case]]
[[File:R3sc-04.jpg|thumb|frameless|250x250px|Case]]
[[File:R3sc-05.jpg|thumb|frameless|250x250px|Case]]
* The NanoPi R3S(as "R3S") is an open source platform with dual-Gbps Ethernet ports designed and developed by FriendlyElec for IoT applications.
* The NanoPi R3S uses the RK3566 SoC, It has two Gbps Ethernet ports and 2G LPDDR4X RAM, 32GB eMMC (optional), FriendlyElec ported an OpenWrt system for it. It works with Docker CE. It is a good platform for developing IoT applications, NAS applications etc.
* The NanoPi R3S can be optionally equipped with an integrated CNC anodized aluminum case and a 2-inch LCD screen for status monitoring.

==Hardware Spec==
* CPU: Rockchip RK3566, Quad-core Cortex-A55
* RAM: 2GB LPDDR4X
* Ethernet: one Native Gigabit Ethernet, and one PCIe Gigabit Ethernet
* USB3.0 Host: Type-A x1
* Storage: MicroSD Slot x 1, and on-board 32GB eMMC
* Debug Serial Port: 3.3V TTL, 3-pin 2.54mm pitch connector, 1500000 bauds
* LED: LED x 3
* RTC: One low-power RTC, support backup battery input
* Buttons: 1x User BUtton, 1x MASK button for eMMC flashing via USB-C 
* Display: 1x MIPI-DSI 30-Pin FPC connector
* PCB Size: 57*57*1.2mm
* Power supply: USB-C 5V/2A input
* Temperature measuring range: 0℃ to 80℃
* OS/Software: U-boot，Ubuntu-Core，Debian-Core，OpenMediaVault, OpenWrt

==Diagram, Layout and Dimension==
===Layout===
[[File:NanoPi R3S-layout.jpg |frameless|550px|NanoPi R3S Layout]]

* '''MIPI-DSI'''
:: 0.5mm FPC Connector
::{| class="wikitable"
|-
|'''Pin#''' ||   '''Signal'''  ||    '''Description '''   
|-
|1,2,3      ||  VCC5V0_SYS          ||   5V Power ouput
|- 
|4,7,9,11,15,18,21,24,27,30||GND    ||   Power and Signal Ground
|- 
|5          || I2C2_SDA_M0         ||   3.3V, I2C Data, has been pulled up to 3.3V with 2.2K on R3S
|-
|6          || I2C2_SCL_M0          ||   3.3V, I2C Clock, has been pulled up to 3.3V with 2.2K on R3S
|-
|8          || GPIO0_C6              ||   3.3V, GPIO
|- 
|10         || GPIO0_C3 or PWM4  ||   3.3V, GPIO/PWM
|-
|12         || GPIO0_C4                 ||   3.3V, GPIO
|-
|13         || /NC                    ||   No Connection
|-
|14         || GPIO0_C5               ||   3.3V, GPIO
|-
|16         || MIPI_DSI_TX1_D3N   ||   MIPI TX Lane3 ouput N
|- 
|17         || MIPI_DSI_TX1_D3P   ||   MIPI TX Lane3 ouput P
|- 
|19         || MIPI_DSI_TX1_D2N    ||   MIPI TX Lane2 ouput N
|-
|20         || MIPI_DSI_TX1_D2P  ||   MIPI TX Lane2 ouput P
|- 
|22         || MIPI_DSI_TX1_D1N ||   MIPI TX Lane1 ouput N
|-
|23         || MIPI_DSI_TX1_D1P   ||   MIPI TX Lane1 ouput P
|- 
|25         || MIPI_DSI_TX1_D0N   ||   MIPI TX Lane0 ouput N
|-
|26         || MIPI_DSI_TX1_D0P   ||   MIPI TX Lane0 ouput P
|-
|28         || MIPI_DSI_TX1_CLKN ||   MIPI TX Clock ouput N
|-
|29         || MIPI_DSI_TX1_CLKP  ||   MIPI TX Clock ouput P
|}

* '''Debug UART'''
:: 3.3V level signals, 1500000bps
::{| class="wikitable"
|-
|'''Pin#''' ||'''Assignment''' ||   '''Description '''   
|-
|1    || GND                    || 0V
|- 
|2   || UART2_TX_M0_DEBUG       || output
|-
|3   || UART2_RX_M0_DEBUG      || intput
|}

*'''USB3.0 A port'''
:: 2A output current limited

*'''RTC'''
::RTC backup current is 0.25μA TYP (VDD =3.0V, TA =25℃).
::Connector P/N: Molex 53398-0271

==Get Started==
===Essentials You Need===
Before starting to use your NanoPi R3S get the following items ready
* NanoPi R3S
* MicroSD Card/TF Card: Class 10 or Above, minimum 8GB SDHC
* USB-C 5V/3A power adapter
* If you need to develop and compile,you need a computer that can connect to the Internet. It is recommended to install Ubuntu 20.04 64-bit system and use the following script to initialize the development environment, or use docker container: <br />
**[https://github.com/friendlyarm/build-env-on-ubuntu-bionic How to setup the Compiling Environment on Ubuntu bionic]<br />
**[https://github.com/friendlyarm/docker-cross-compiler-novnc docker-cross-compiler-novnc]<br />


===TF Cards We Tested===
Refer to： [[Template:TFCardsWeTested/zh|TFCardsWeTested]]
{{1500000SerialPortDebugSetting}}
===Install OS===
{{Downloads-RK3566|NanoPi-R3S}}
{{BurnLinuxToSD-Rockchip|NanoPi-R3S}}
{{BurnLinuxToEMMC-Rockchip|NanoPi-R3S}}
{{FriendlyWrt21|NanoPi-R3S}}
{{OfficialDebianCore|NanoPi-R3S}}

==How to Compile==
{{Rockchip-DevEnv|NanoPi-R3S}}
{{RK3566-BuildFromSource|NanoPi-R3S}}
{{RK3566-HWAccess|NanoPi-R3S}}

{{RockchipMiscCustome|RK3566}}
{{RockchipCommonLinuxTips|RK3566}}
{{RockchipUnbrick|NanoPi-R3S}}
{{MoreOS}}

==Resources==
===Datasheets and Schematics===
* Schematics
** [https://wiki.friendlyelec.com/wiki/images/a/a3/NanoPi_R3S_2406_SCH.PDF NanoPi_R3S_2406_SCH.PDF]

* PCB Dimensional Diagram
** [https://wiki.friendlyelec.com/wiki/images/a/a3/NanoPi_R3S_2D_CAD_DXF.zip NanoPi_R3S_2D_CAD_DXF.zip]

* IC Datasheet
** [https://wiki.friendlyelec.com/wiki/images/8/89/Rockchip_RK3566_Datasheet_V1.2-20220930.pdf Rockchip_RK3566_Datasheet_V1.2-20220930.pdf]

==Update Logs==
{{RK3566-UpdateLog|NanoPi-R3S}}