View source for NanoPi R5C

[[NanoPi R5C/zh|查看中文]]
==Introduction==
[[File:NanoPi_R5C-01B.jpg|thumb|Overview]]
[[File:NanoPi_R5C-A01.jpg|thumb|Front]]
[[File:NanoPi_R5C-B01.jpg|thumb|Back]]
[[File:R5CC-01.jpg|thumb|frameless|250x250px|Case]]
[[File:R5CC-02.jpg|thumb|frameless|250x250px|Case]]
[[File:R5CC-03.jpg|thumb|frameless|250x250px|Case]]
[[File:R5CC-04.jpg|thumb|frameless|250x250px|Case]]
The NanoPi R5C (as “R5C”) is an open-sourced mini IoT gateway device with two 2.5G, designed and developed by FriendlyElec.It is integrated with a Rockchip RK3568B2 CPU, 4GB LPDDR4x RAM and 32GB eMMC flash. It supports booting with TF cards and works with operating systems such as FriendlyWrt etc.<br/><br/>
The NanoPi R5C has rich hardware resources with a compact size of 58 x 58 mm. FriendlyElec has released a carefully-designed custom CNC housing for it. It has one HDMI port. It works with Android, Ubuntu Desktop and Buildroot etc and works with headless systems as well. It supports decoding 4K60p H.265/H.264 formatted videos.  <br/><br/>
The NanoPi R5C has one M.2 E-Key port, two USB 3.2 Gen 1 ports. It is an ideal portable drive for saving images and videos.<br/><br/>
All in all, the NanoPi R5C is a board featured with multiple Ethernet ports, light NAS and video playing. It is a cannot-miss platform with infinite possibilities for geeks, fans and developers.
==Hardware Spec==
* SoC: Rockchip RK3568B2
** CPU: Quad-core ARM Cortex-A55 CPU, up to 2.0GHz
** GPU: Mali-G52 1-Core-2EE，supports OpenGL ES 1.1, 2.0, and 3.2, Vulkan 1.0 and 1.1, OpenCL 2.0 Full Profile
** VPU: 4KP60 H.265/H.264/VP9 video decoder, 1080P60 H.264/H.265 video encoder
** NPU: Support 0.8T
* RAM: 4GB LPDDR4X
* Flash: 32GB eMMC
* Ethernet: two PCIe 2.5Gbps Ethernet
* USB: two USB 3.2 Gen 1 Type-A ports
* HDMI:
** support HDMI1.4 and HDMI2.0 operation
** support up to 10 bits Deep Color modes
** support up to 1080p@120Hz and 4096x2304@60Hz
** support 3-D video formats
* M.2 Key E: PCIe2.1 x1, USB 2.0 x1, supports M.2 WiFi and Bluetooth Module.
* microSD: support UHS-I
* Debug: one Debug UART, 3 Pin 2.54mm header, 3.3V level, 1500000bps
* LEDs: 4 x GPIO Controlled LED (SYS, WAN, LAN, WL)
* others:
** 2 Pin 1.27/1.25mm RTC battery input connector for low power RTC IC HYM8563TS
** MASK button for eMMC update
** One User button 
* Power supply: USB-C 5V input
* PCB: 8 Layer, 58x58x1.6mm
*Ambient Operating Temperature: 0℃ to 70℃
==Diagram, Layout and Dimension==
===Layout===
[[File:NanoPi_R5C_Layout.jpg |thumb|600px|NanoPi R5C Layout]]

* '''Debug UART Pin Spec'''
:: 3.3V level signals, 1500000bps
::{| class="wikitable"
|-
|'''Pin#''' ||'''Assignment''' ||   '''Description '''
|-
|1    || GND                 || 0V
|-
|2   || UART2DBG_TX         || output
|-
|3   || UART2DBG_RX         || intput
|}

*'''USB Port'''
:: Each USB 3.2 Gen 1 port has 1.4A overcurrent protection.
*'''RTC'''
::RTC backup current is 0.25μA TYP (VDD =3.0V, TA =25℃).
::Connector P/N: Molex 53398-0271
==Get Started==
===Essentials You Need===
Before starting to use your NanoPi-R5C get the following items ready
* NanoPi-R5C
* MicroSD Card/TF Card: Class 10 or Above, minimum 8GB SDHC
* USB C PD Charger (10W & above)
* If you need to develop and compile,you need a computer that can connect to the Internet. It is recommended to install Ubuntu 20.04 64-bit system and use the following script to initialize the development environment, or use docker container: <br />
**[https://github.com/friendlyarm/build-env-on-ubuntu-bionic How to setup the Compiling Environment on Ubuntu bionic]<br />
**[https://github.com/friendlyarm/docker-cross-compiler-novnc docker-cross-compiler-novnc]<br />
===TF Cards We Tested===
Refer to： [[Template:TFCardsWeTested/zh|TFCardsWeTested]]
{{1500000SerialPortDebugSetting}}
===Install OS===
{{Downloads-RK3568|NanoPi-R5C}}
{{BurnLinuxToSD-Rockchip|NanoPi-R5C}}
{{BurnLinuxToEMMC-Rockchip|NanoPi-R5C}}
{{FriendlyWrt21|NanoPi-R5C}}
{{OfficialUbuntuCore|NanoPi-R5C}}
{{FriendlyCoreRemoveQt}}
{{Android12|NanoPi-R5C}}
==Work with Debian11 Desktop==
===Introduction to Debian11 Desktop===
{{DebianBullseyeDesktop-XFCE-Intro|NanoPi-R5C}}
{{DebianBullseyeDesktop-XFCE-Common|NanoPi-R5C}}
{{DebianBullseyeDesktop-XFCE-WithHDMI|NanoPi-R5C}}
==Work with Debian10 Desktop==
* Refer to：
** [[Debian Buster Desktop|Debian Buster]]
==Buildroot Linux==
{{RK3399 Buildroot Intro|NanoPi-R5C}}
<br />
For a more detailed description of the Buildroot system, please refer to: [[Buildroot|Buildroot]]<br />
==How to Compile==
{{Rockchip-DevEnv|NanoPi-R5C}}
{{RK3568-BuildFromSource|NanoPi-R5C}}
{{RK3568-HWAccess|NanoPi-R5C}}
{{RockchipMiscCustome|RK3568}}
{{Template:How to Initialize and Format New SSD And HDD|NanoPi-R5C}}
{{RockchipCommonLinuxTips|rk3568}}
{{RockchipUnbrick|NanoPi-R5C}}
==Link to Rockchip Resources==
{{LinkToRockchipResources|NanoPi-R5C}}
==Schematic, PCB CAD File==
*Schematic:  [https://wiki.friendlyelec.com/wiki/images/4/45/NanoPi_R5C_2209_SCH.PDF NanoPi_R5C_2209_SCH.PDF]
*PCB CAD File：[https://wiki.friendlyelec.com/wiki/images/b/b5/NanoPi_R5C_2209_DXF.zip NanoPi_R5C_2209_DXF.zip]

==Update Logs==
{{RK3568-UpdateLog|NanoPi-R5C}}