View source for NanoPi NEO3

[[NanoPi NEO3/zh|查看中文]]

==Introduction==
[[File:NanoPi_NEO3-1.jpg|thumb|frameless|250x250px|Front]]
[[File:NanoPi_NEO3-2.jpg|thumb|frameless|250x250px|Back]]
[[File:NanoPi_NEO3-3.jpg|thumb|frameless|250x250px|Overview]]
* The NanoPi NEO3 is another fun board developed by FriendlyELEC for makers, hobbyists and fans.

==Hardware Spec==
* Soc: RockChip RK3328, Quad-core 64-bit high-performance Cortex A53
* RAM: 1GB/2GB DDR4
* LAN: 10/100/1000M Ethernet with unique MAC
* USB Host: 1x USB3.0 Type A and 2x USB2.0 on 2.54mm pin header
* MicroSD Slot: MicroSD x 1 for system boot and storage
* LED: Power LED x 1, System LED x 1
* Key: User Button x 1
* Fan: 2Pin JST ZH 1.5mm Connector for 5V Fan
* GPIO: 2.54mm pitch 26 pin-header, include I2C, UART, SPI, I2S, GPIO
* Serial Debug Port: 2.54mm pitch 3 pin-header, 1500000bps
* Power: 5V/1A, via Type-C or GPIO
* PCB Dimension: 48 x 48mm
* Working Temperature: -20℃ to 70℃
* Weight: 22g

==Diagram, Layout and Dimension==
===Layout===
[[File:NanoPi_NEO3-layout.jpg |thumb|600px|NanoPi NEO3 Layout]]

* '''GPIO（I2C/UART/SPI/I2S/GPIO）'''
::{| class="wikitable" 
|- style="font-weight:bold;"
! Pin#
! Name
! Linux GPIO
! Pin#
! Name
! Linux GPIO
|-
| 1
| 3.3V(OUT)
| 
| 2
| 5V(OUT/IN)
| 
|-
| 3
| I2C0_SDA
| 
| 4
| 5V(OUT/IN)
| 
|-
| 5
| I2C0_SCL
| 
| 6
| GND
| 
|-
| 7
| GPIO2_A2/IR-RX
| 66
| 8
| GPIO3_A4/UART1_TX
| 100
|-
| 9
| GND
| 
| 10
| GPIO3_A6/UART1_RX
| 102
|-
| 11
| GPIO2_B7/I2S1_MCLK
| 79
| 12
| GPIO2_C3/I2S1_SDI
| 83
|-
| 13
| GPIO2_C1/I2S1_LRCK_TX
| 81
| 14
| GND
| 
|-
| 15
| GPIO2_C2/I2S1_SCLK
| 82
| 16
| GPIO3_A5/UART1_RTSN
| 101
|-
| 17
| 3.3V(OUT)
| 
| 18
| GPIO3_A7/UART1_CTSN
| 103
|-
| 19
| GPIO3_A1/SPI_TXD
| 97
| 20
| GND
| 
|-
| 21
| GPIO3_A2/SPI_RXD
| 98
| 22
| GPIO2_C7/I2S1_SDO
| 87
|-
| 23
| GPIO3_A0/SPI_CLK
| 96
| 24
| GPIO3_B0/SPI_CSN0
| 104
|-
| 25
| GND
| 
| 26
| GPIO0_D3/SPDIF_TX
| 27
|}

* '''USB2.0'''
::{| class="wikitable" 
|- style="font-weight:bold;"
! Pin#
! Name
! Pin#
! Name
|-
| 1
| GND
| 2
| GND
|-
| 3
| DP1
| 4
| OTG_DP
|-
| 5
| DM1
| 6
| OTG_DM
|-
| 7
| 5V
| 8
| 5V
|}

:'''Note:'''
::# For more details refer to the document: [http://wiki.friendlyelec.com/wiki/images/a/ae/NanoPi-NEO3-2005-Schematic.pdf NanoPi-NEO3-2005-Schematic.pdf]

===Dimensional Diagram===
:Refer to the document: [http://wiki.friendlyelec.com/wiki/images/6/6e/NanoPi_NEO3_2005%28dxf%29.zip pcb file in dxf format]

==Get Started==
===Essentials You Need===
Before starting to use your NanoPi NEO3 get the following items ready
* NanoPi NEO3
* MicroSD Card/TF Card: Class 10 or Above, minimum 8GB SDHC
* TYPC-C 5V/2A power adapter
* A host computer running Ubuntu 18.04 64-bit system

{{TFCardsWeTested}}
{{1500000SerialPortDebugSetting}}
===Install OS===
{{Downloads-RK3328|NanoPi-NEO3}}
{{BurnLinuxToSD-Rockchip|NanoPi-NEO3}}
{{FriendlyWrt21|NanoPi-NEO3}}
{{OfficialUbuntuCore|NanoPi-NEO3}}
{{FriendlyCoreRemoveQt}}
{{OfficialDebianCore|NanoPi-NEO3}}

==How to Compile==
{{Rockchip-DevEnv|NanoPi-NEO3}}
{{RK3328-BuildFromSource|NanoPi-NEO3}}
{{RK3328-HWAccess|NanoPi-NEO3}}
{{RockchipMiscCustome|RK3328}}
{{MoreOS}}
==Resources==
===Schematics and Datasheets===
* Schematics
** [http://wiki.friendlyelec.com/wiki/images/a/ae/NanoPi-NEO3-2005-Schematic.pdf NanoPi-NEO3-2005-Schematic.pdf]
* Dimensional Diagram
**  [http://wiki.friendlyelec.com/wiki/images/6/6e/NanoPi_NEO3_2005%28dxf%29.zip pcb file in dxf format]
* RK3328 Datasheet [http://wiki.friendlyelec.com/wiki/images/d/d7/Rockchip_RK3328_Datasheet_V1.1-20170309.pdf Rockchip_RK3328_Datasheet.pdf]

==Update Logs==
{{RK3328-UpdateLog|NanoPi-NEO3}}