View source for CM3588/zh

[[CM3588|English]]
==介绍==
[[File:CM3588-A01.jpg|thumb|Front]]
[[File:CM3588-B01.jpg|thumb|Back]]
[[File:CM3588SDK-A01.jpg|thumb|Carrier Board Front]]
[[File:CM3588SDK-B01.jpg|thumb|Carrier Board Back]]
*CM3588是友善电子团队设计的一款高性能ARM计算机模块，它采用瑞芯微RK3588作为主控处理器，配备4/8/16GB LPDDR4x内存，64GB eMMC闪存(可选)。CM3588采用4个100Pin板对板连接器，引出几乎所有IO资源。
*CM3588计算模块具有丰富的外设和扩展接口，通过底板可连接使用4个NVMe高速固态硬盘，读写速度高达1GB/s; 另外它还带有双HDMI-Out显示接口和1个HDMI-In接口，2路USB3.0, 1路USB2.0, 2.5G以太网接口等。
*底板的2个HDMI输出接口和1个HDMI IN接口可解码播放最高8K60p H.265/VP9, 以及8K30p H264等格式视频，并可录制4k60p H.265格式视频。
*CM3588提供NAS系统OpenMediaVault方便组建NAS, 同时提供Android, Ubuntu, Debian, Buildroot和OpenWrt等操作系统, 软件资源和生态非常丰富，非常适合中小型企业和初创公司做高端人脸识别，机器视觉，自动驾驶，深度计算分析等方面的人工智能产品快速原型及产品开发。
==CM3588资源特性==
* SoC: Rockchip RK3588
** CPU: Quad-core ARM Cortex-A76(up to 2.4GHz) and quad-core Cortex-A55 CPU (up to 1.8GHz)
** GPU: Mali-G610 MP4, compatible with OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan1.2
** VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, 4K@60fps AV1 decoder, 8K@30fps H.264 and H.265 encoder
** NPU: 6TOPs, supports INT4/INT8/INT16/FP16
* RAM: 64-bit 4GB/8GB/16GB LPDDR4X at 2133MHz
* Flash: 0GB/64GB eMMC, at HS400 mode
* 1 x microSD interface, support up to SDR104 mode
* 1 x On-board PCIe 2.5G ethernet controller (RTL8125B)
* USB:
** 2 x USB 3.1 Gen1 OTG which combo with DP display（up to 4Kp60）
** 1 x USB 3.1 Gen1 Host
** 2 x USB 2.0 Host
* PCIe:
** up to 4 x PCIe interfaces
*** 2 x  PCIe 2.1 x1 and 2 x PCIe 3.0 x2
*** or 2 x PCIe 2.1 x1 and 1 x PCIe 3.0 x4
*** or 1 x PCIe 2.1 x1, 1 x PCIe 3.0 x2, and 2 x PCIe 3.0 x1
*** or 4 x PCIe 3.0 x1
* HDMI output: 
** 2 x HDMI outputs which is compatible with HDMI2.1, HDMI2.0, and HDMI1.4 operation
** one support displays up to 7680x4320@60Hz, another one support up to 4Kp60
** Support RGB/YUV(up to 10bit) format
* HDMI input: 1 x HDMI input, up to 4Kp60
* MIPI RX:
** 2 x 4lane MIPI DPHY CSI RX which support x4 mode or x2+x2 mode ,compatible with MIPI V1.2
** 2 x 4lane MIPI_D/CPHY_RX
* MIPI TX:
** 2 x 4-lane MIPI D-PHY/C-PHY Combo PHY TX, compatible with MIPI DPHY 2.0 or CPHY 1.1
* Codec:
** On-board ALC5616 Codec
** 1 x stereo headphone output ( 20mW/CH, THD+N <= -80dB, 16Ohm Load )
** 1 x single-end microphone input
* GPIO: 
** up to 3 x SPIs, 7 x UARTs, 6 x I2Cs, 15 x PWMs, 3 x I2Ss, 1 x SDIO, 81 x GPIOs
* others: 
** low power RTC (HYM8563TS) with backup battery input
** Support 38Khz IR input
** MASK button for eMMC update, reset button, Power button, and recovery mode button
** Debug UART,3.3V level, 1500000bps
** 2 x GPIO Controlled LED (SYS, LED1)
* Power supply: 5~20VDC input, 15W max
* PCB: 8 Layers, 55x65x1.6mm
* Stacking height: 6.6mm
* Connector: 4 x DF40C-100DP-0.4V(51), the mating connector is DF40HC(3.0)-100DS-0.4V(51)
* Ambient Operating Temperature: 0℃ to 70℃

==接口布局和尺寸==
[[File:CM3588 CPU board layout.jpg|600px]]
*[https://wiki.friendlyelec.com/wiki/images/0/00/CM3588_2309_SCH.PDF CM3588 2309 原理图]
*[https://wiki.friendlyelec.com/wiki/images/f/f5/CM3588_2309_DXF.zip CM3588 PCB CAD文件]
*[https://wiki.friendlyelec.com/wiki/images/3/37/CM3588_Pinout_Interfaces.pdf CM3588引脚定义和接口说明] 
===Carrier Board===
* Please click [[CM3588 NAS Kit/zh|CM3588 NAS Kit Wiki page]]
[[File:CM3588 NAS SDK Carrier board layout.jpg|1000px]]

==快速入门==
===准备工作===
要开启你的CM3588新玩具，请先准备好以下硬件
* CM3588核心板
* CM3588 NAS Kit底板
* MicroSD卡/TF卡: Class10或以上的 8GB SDHC卡
* 一个DC接口的外接电源，要求输出为12V/2A
* 如果需要开发与编译，则需要一台可以联网的电脑，推荐安装Ubuntu 20.04 64位系统，并使用下面的脚本初始化开发环境, 也可以使用Docker容器: <br />
**[https://github.com/friendlyarm/build-env-on-ubuntu-bionic How to setup the Compiling Environment on Ubuntu bionic]<br />
**[https://github.com/friendlyarm/docker-cross-compiler-novnc docker-cross-compiler-novnc]<br />
===经测试可选用的TF卡===
请参考: [[Template:TFCardsWeTested/zh|TF Cards We Tested]]
{{1500000SerialPortDebugSetting/zh}}
===安装系统===
{{Downloads-RK3588/zh|CM3588}}
{{BurnLinuxToSD-Rockchip/zh|CM3588}}
{{BurnLinuxToEMMC-Rockchip/zh|CM3588}}
{{RockchipBootPriority/zh|CM3588}}
==OpenMediaVault NAS系统的使用==
===OpenMediaVault NAS系统简介===
{{OpenMediaVault-Intro/zh|CM3588}}
* 详细请参考如下链接：
** [[Getting Started with OpenMediaVault/zh|Getting Started with OpenMediaVault]]
==Ubuntu 22.04 桌面系统的使用==
===Ubuntu 22.04桌面系统简介===
{{UbuntuJammyDesktop-Intro/zh|CM3588}}
* Refer to：
** [[Ubuntu Jammy Desktop|Ubuntu Jammy Desktop]]
{{Android12/zh|CM3588}}
==Debian11 桌面系统的使用==
===Debian11桌面系统简介===
{{DebianBullseyeDesktop-XFCE-Intro/zh|CM3588}}
* Refer to：
** [[Debian Bullseye Desktop/zh|Debian Bullseye Desktop]]
{{OfficialUbuntuCore/zh|CM3588}}
{{FriendlyCoreRemoveQt/zh}}
==如何编译系统==
{{Rockchip-DevEnv/zh|CM3588}}
{{RK3588-BuildFromSource/zh|CM3588}}
{{RK3588-HWAccess/zh|CM3588}}
{{RockchipMiscCustome/zh|RK3588}}

{{Template:How to Initialize and Format New SSD And HDD/zh|CM3588}}
==Link to Rockchip Resources==
{{Link to Rockchip Resources|CM3588}}
==手册原理图等开发资料==
*CM3588 原理图: https://wiki.friendlyelec.com/wiki/images/0/00/CM3588_2309_SCH.PDF
*CM3588 PinDelay: https://wiki.friendlyelec.com/wiki/images/8/81/CM3588_Net_PinDelay.pdf
*CM3588 PCB CAD 文件：https://wiki.friendlyelec.com/wiki/images/f/f5/CM3588_2309_DXF.zip
*CM3588 引脚和接口说明 https://wiki.friendlyelec.com/wiki/images/3/37/CM3588_Pinout_Interfaces.pdf
*CM3588 NAS Kit 原理图: https://wiki.friendlyelec.com/wiki/images/1/15/CM3588_NAS_SDK_2309_SCH.PDF
*CM3588 NAS Kit PCB CAD 文件: https://wiki.friendlyelec.com/wiki/images/f/fe/CM3588_NAS_SDK_2309_DXF.zip
*CM3588 NAS Kit PCB layout PDF 文件: https://wiki.friendlyelec.com/wiki/images/2/2c/CM3588_NAS_SDK_2309_PCB_Layout.pdf

==更新日志==
===2023-11-20===
首次发布
===2023-11-28===
增加CM3588引脚和接口说明文档
===2023-12-13===
增加CM3588 PinDelay文档