Difference between revisions of "Template:BurnLinuxToEMMC-Allwinner"

From FriendlyELEC WiKi
Jump to: navigation, search
(updated by API)
(updated by API)
Line 1: Line 1:
 
=====Boot from eMMC=====
 
=====Boot from eMMC=====
 
* Extract the eflasher Image and win32diskimager.rar files. Insert a TF card(at least 4G) into a Windows PC and run the win32diskimager utility as administrator. On the utility's main window select your TF card's drive, the wanted image file and click on "write" to start flashing the TF card.
 
* Extract the eflasher Image and win32diskimager.rar files. Insert a TF card(at least 4G) into a Windows PC and run the win32diskimager utility as administrator. On the utility's main window select your TF card's drive, the wanted image file and click on "write" to start flashing the TF card.
* Insert this card into your board's BOOT slot and power on (with a 5V/2A power source). If the green LED is on and the blue LED is blinking this indicates your board has successfully booted.<br />
+
* Insert this card into your board's BOOT slot and power on (with a 5V/2A power source). If the green LED is on and the blue LED is blinking this indicates your board has successfully booted.
 +
{{#switch: {{{1}}}
 +
| NanoPi-M1-Plus =
 
* Connect the board to an HDMI monitor or an LCD and a USB mouse, and select an OS to start installation.
 
* Connect the board to an HDMI monitor or an LCD and a USB mouse, and select an OS to start installation.
 
[[File:eflasher.jpg|frameless|600px|eflasher]]<br>
 
[[File:eflasher.jpg|frameless|600px|eflasher]]<br>
If no monitor is connected you can select an OS by running the following command:
+
| NanoPi-K1-Plus =
 +
* Connect the board to an HDMI monitor or an LCD and a USB mouse, and select an OS to start installation.
 +
[[File:nanopi-k1-plus-eflasher.png|frameless|600px|nanopi-k1-plus-eflasher]]<br>
 +
}}
 +
* If your board doesn't support HDMI or no monitor is connected you can select an OS by running the following command:
 
<syntaxhighlight lang="bash">
 
<syntaxhighlight lang="bash">
 
$ su root
 
$ su root

Revision as of 03:57, 25 April 2018

Boot from eMMC
  • Extract the eflasher Image and win32diskimager.rar files. Insert a TF card(at least 4G) into a Windows PC and run the win32diskimager utility as administrator. On the utility's main window select your TF card's drive, the wanted image file and click on "write" to start flashing the TF card.
  • Insert this card into your board's BOOT slot and power on (with a 5V/2A power source). If the green LED is on and the blue LED is blinking this indicates your board has successfully booted.
  • If your board doesn't support HDMI or no monitor is connected you can select an OS by running the following command:
$ su root
$ eflasher

The password for "root" is "fa".Type a number and enter to select an OS, then type "yes" and enter to start installation:
eflasher-console
After installation is done shutdown the system, take out the TF card, power on your board again and it will boot from eMMC.