Difference between revisions of "NanoPi R5S"

From FriendlyELEC WiKi
Jump to: navigation, search
(updated by API)
(updated by API)
Line 9: Line 9:
 
[[File:R5SC-03.jpg|thumb|frameless|250x250px|Case]]
 
[[File:R5SC-03.jpg|thumb|frameless|250x250px|Case]]
 
[[File:R5SC-04.jpg|thumb|frameless|250x250px|Case]]
 
[[File:R5SC-04.jpg|thumb|frameless|250x250px|Case]]
NanoPi R5S(简称”R5S”)是友善电子团队设计出品的一款双2.5G+千兆三网口的开源迷你路由器, 它采用瑞心微RK3568B2作为主控处理器, 配备2GB/4GB LPDDR4x内存,和8GB eMMC闪存,并支持TF卡启动和运行FriendlyWRT等系统。<br/><br/>
+
The NanoPi R5S (as “R5S”) is an open-sourced mini router with two 2.5G and one Gbps Ethernet ports, designed and developed by FriendlyElec.It is integrated with a Rockchip RK3568B2 CPU, 2GB/4GB LPDDR4x RAM and 8GB eMMC flash. It supports booting with TF cards and works with operating systems such as FriendlyWRT etc.<br/><br/>
R5S接口丰富,布局紧凑,主板尺寸只有90x62mm,可选配安装一体化CNC氧化铝外壳。它带有1个HDMI输出接口,可运行Android, Ubuntu桌面等系统,也可以用作极客喜欢的命令行模式;并且可解码播放4K60p H.265/H.264等格式视频。<br/><br/>
+
The NanoPi R5S has rich hardware resources with a compact size of 90 x 62 mm. FriendlyElec has released a carefully-designed custom CNC housing for it. It has one HDMI port. It works with Android, Ubuntu Desktop and Buildroot etc and works with headless systems as well. It supports decoding 4K60p H.265/H.264 formatted videos.  <br/><br/>
R5S还带有1个M.2 NVME固态硬盘接口,和2个USB 3.0接口,并支持USB C口PD快充电源供电,外接移动硬盘时无需担心供电不足,是照片和视频爱好者便携存储和处理的利器。<br/><br/>
+
The NanoPi R5S has one M.2 NVME port, two USB 3.0 ports, and supports USB type-C power delivery. It is an ideal portable drive for saving images and videos.<br/><br/>
简言之,R5S集多网口、轻NAS和视频播放于一体,非常适合Geek玩家发掘、探索打造自己独具一格的玩法。
+
All in all, the NanoPi R5S is a board featured with multiple Ethernet ports, light NAS and video playing. It is a cannot-miss platform with infinite possibilities for geeks, fans and developers.
 
==Hardware Spec==
 
==Hardware Spec==
 
* SoC: Rockchip RK3568B2
 
* SoC: Rockchip RK3568B2

Revision as of 05:05, 22 May 2022

查看中文

Contents

1 Introduction

Overview
Front
Back
Case
Case
Case
Case

The NanoPi R5S (as “R5S”) is an open-sourced mini router with two 2.5G and one Gbps Ethernet ports, designed and developed by FriendlyElec.It is integrated with a Rockchip RK3568B2 CPU, 2GB/4GB LPDDR4x RAM and 8GB eMMC flash. It supports booting with TF cards and works with operating systems such as FriendlyWRT etc.

The NanoPi R5S has rich hardware resources with a compact size of 90 x 62 mm. FriendlyElec has released a carefully-designed custom CNC housing for it. It has one HDMI port. It works with Android, Ubuntu Desktop and Buildroot etc and works with headless systems as well. It supports decoding 4K60p H.265/H.264 formatted videos.

The NanoPi R5S has one M.2 NVME port, two USB 3.0 ports, and supports USB type-C power delivery. It is an ideal portable drive for saving images and videos.

All in all, the NanoPi R5S is a board featured with multiple Ethernet ports, light NAS and video playing. It is a cannot-miss platform with infinite possibilities for geeks, fans and developers.

2 Hardware Spec

  • SoC: Rockchip RK3568B2
    • CPU: Quad-core ARM Cortex-A55 CPU, up to 2.0GHz
    • GPU: Mali-G52 1-Core-2EE,supports OpenGL ES 1.1, 2.0, and 3.2, Vulkan 1.0 and 1.1, OpenCL 2.0 Full Profile
    • VPU: 4KP60 H.265/H.264/VP9 video decoder, 1080P60 H.264/H.265 video encoder
    • NPU: Support 0.8T
  • RAM: 2GB LPDDR4X
  • Flash: 8GB eMMC
  • Ethernet: one Native Gigabit Ethernet, and two PCIe 2.5Gbps Ethernet
  • USB: two USB 3.0 Type-A ports
  • HDMI:
    • support HDMI1.4 and HDMI2.0 operation
    • support up to 10 bits Deep Color modes
    • support up to 1080p@120Hz and 4096x2304@60Hz
    • support 3-D video formats
  • PCIe: M.2 Key M, PCIe2.1 x1, support NVME, PCIe WiFi etc
  • microSD: support UHS-I
  • GPIO:
    • 12-pin 0.5mm FPC connector
    • up to 1x SPI, up to 3x UARTs, up to 4x PWMs, up to 8x GPIOs
  • SD/MMC/SDIO/I2S:
    • 2x8-pin 1.27mm connector
    • Compatible with SDIO3.0 protocol
    • Compatible with SD3.0, MMC ver4.51
    • 4bits data bus widths
    • 1x I2S with 2x SDO and 3x SDI
  • Debug: one Debug UART, 3 Pin 2.54mm header, 3.3V level, 1500000bps
  • LEDs: 4 x GPIO Controlled LED (SYS, WAN, LAN1, LAN2)
  • others:
    • 2 Pin 1.27/1.25mm RTC battery input connector for low power RTC IC HYM8563TS
    • MASK button for eMMC update
    • one 5V Fan connector
  • Power supply: USB-C, support PD, 5V/9V/12V input
  • PCB: 8 Layer, 62x90x1.6mm
  • Ambient Operating Temperature: 0℃ to 70℃

3 Diagram, Layout and Dimension

3.1 Layout

NanoPi R5S Layout
  • 12-pin GPIO
Pin# GPIO SPI UART PWM POWER Description
1 VCC3V3_SYS 3.3V power output
2 VCC3V3_SYS 3.3V power output
3 GPIO3_C3 SPI1_CLK_M1 UART5_RX_M1 3.3V level
4 GND
5 GPIO3_C2 SPI1_MISOI_M1 UART5_TX_M1 3.3V level
6 GPIO3_A1 SPI1_CS0_M1 3.3V level
7 GPIO3_C1 SPI1_MOSI_M1 3.3V level
8 GND
9 GPIO4_C5 UART9_TX_M1 PWM12_M1 3.3V level
10 GPIO4_C6 UART9_RX_M1 PWM13_M1 3.3V level
11 GPIO3_C4 UART7_TX_M1 PWM14_M0 3.3V level
12 GPIO3_C5 UART7_RX_M1 PWM15_IR_M0 3.3V level
  • 2x8-pin SDIO/I2S
Pin# GPIO SD/MMC/SDIO I2S POWER Description
1 VCC5V0_SYS 5V power output
2 VCC5V0_SYS 5V power output
3 GPIO3_C6 SDMMC2_D0_M0 I2S1_MCLK_M1 1.8V level
4 GPIO3_C7 SDMMC2_D1_M0 I2S1_SCLK_TX_M1 1.8V level
5 GND
6 GND
7 GPIO3_D0 SDMMC2_D2_M0 I2S1_LRCK_TX_M1 1.8V level
8 GPIO3_D3 SDMMC2_CLK_M0 I2S1_SDI1_M1 1.8V level
9 GND
10 GND
11 GPIO3_D1 SDMMC2_D3_M0 I2S1_SDO0_M1 1.8V level
12 GPIO3_D2 SDMMC2_CMD_M0 I2S1_SDI0_M1 1.8V level
13 GND
14 GND
15 GPIO3_D5 SDMMC2_PWREN_M0 I2S1_SDI3_M1 1.8V level
16 GPIO3_D4 SDMMC2_DET_M0 I2S1_SDI2_M1 1.8V level
  • Debug UART Pin Spec
3.3V level signals, 1500000bps
Pin# Assignment Description
1 GND 0V
2 UART2DBG_TX output
3 UART2DBG_RX intput
  • USB Port
Each USB 3.0 port has 1.4A overcurrent protection.
  • RTC
RTC backup current is 0.25μA TYP (VDD =3.0V, TA =25℃).
Connector P/N: Molex 53398-0271

4 Get Started

4.1 Essentials You Need

Before starting to use your NanoPi-R5S get the following items ready

  • NanoPi-R5S
  • MicroSD Card/TF Card: Class 10 or Above, minimum 8GB SDHC
  • USB C PD Charger (10W & above)
  • A host computer running Ubuntu 18.04 64-bit system

4.2 TF Cards We Tested

Refer to: TFCardsWeTested

4.3 PD Power Adapters We Tested

Refer to: PD Power Adapters We Tested

4.4 Configure parameters for serial port

Use the following serial parameters:

Baud rate 1500000
Data bit 8
Parity check None
Stop bit 1
Flow control None

4.5 Install OS

4.5.1 Flash to TF

Visit download linkto download image files (in the "01_Official images/01_SD card images" directory) and utilities (in the "05_Tools" directory):

Image Files
rk3568-sd-friendlywrt-21.02-YYYYMMDD.img.gz FriendlyWrt lite image file, based on OpenWrt 21.02, kernel version 5.10.y
rk3568-sd-friendlywrt-21.02-docker-YYYYMMDD.img.gz FriendlyWrt with Docker image file, based on OpenWrt 21.02, kernel version 5.10.y
rk3568-sd-friendlywrt-22.03-YYYYMMDD.img.gz FriendlyWrt lite image file, based on OpenWrt 22.03, kernel version 5.10.y
rk3568-sd-friendlywrt-22.03-docker-YYYYMMDD.img.gz FriendlyWrt with Docker image file, based on OpenWrt 22.03, kernel version 5.10.y
rk3568-sd-androidtv-YYYYMMDD.img.zip Android 12 TV
rk3568-sd-android12-YYYYMMDD.img.zip Android 12 Tablet
rk3568-sd-debian-bullseye-core-5.10-arm64-YYYYMMDD.img.gz Debian 11(Bullseye) Core, no desktop environment, command line only, kernel version 5.10.y
rk3568-sd-debian-bullseye-minimal-5.10-arm64-YYYYMMDD.img.gz Debian 11(Bullseye) Desktop, Uses LXDE as default desktop, no pre-installed recommended software, supports hardware acceleration, kernel version 5.10.y
rk3568-sd-debian-bullseye-desktop-5.10-arm64-YYYYMMDD.img.gz Debian 11(Bullseye) Desktop, Uses LXDE as default desktop, pre-installed mpv, smplayer and chromium brower, supports hardware acceleration, kernel version 5.10.y
rk3568-sd-friendlycore-focal-5.10-arm64-YYYYMMDD.img.gz 64-bit FriendlyCore Lite image file based on Ubuntu core 20.04 64bit, kernel version 5.10.y
Other Image
Github Actions FriendlyWrt
Flash Utility:
win32diskimager.rar Windows utility. Under Linux users can use "dd"

The detailed steps are as follows:

  • Get an 8G SDHC card and backup its data if necessary;
  • Download and extract the xxx.img.gz and win32diskimager;
  • Run the win32diskimager utility under Windows as administrator. On the utility's main window select your SD card's drive, the wanted image file and click on "write" to start flashing the SD card. Under Linux run "dd" to flash the rkXXXX-sd-OSNAME-YYYYMMDD.img file to your SD card;
  • Take out the SD and insert it to NanoPi-R5S's microSD card slot;
  • Power on NanoPi-R5S and it will be booted from your TF card;

4.5.2 Install OS to eMMC

4.5.2.1 Option 1: Install OS on Web Page

Get a TF card which has been installed with FriendlyWrt, log in FriendlyWrt on the web page, click on “System” ->”eMMC Tools”. Click on “Select file” to select your wanted image file, either an official image (the name might start with “rk3568-sd”) or a third party image. The file should be a “.gz” or “.img” file.
After a file is selected, click on “Upload and Write” to start installing an OS.
Friendlywrt-emmctools2-en.png
After installation is done, eject the SD card, the system will automatically reboot and load the OS from eMMC. After the OS begins to load, if the system LED is flashing and the network LED is on, it means the the OS has loaded successfully. If the OS is FriendlyWrt, you can click on “Go to Homepage” to enter the homepage.
Note that if you are burning the FriendlyElec firmware, you need to use an image file with the "-sd-" file name, similar to the one below:

rk3568-sd-friendlywrt-21.02-YYYYMMDD.img.gz
rk3568-sd-friendlywrt-21.02-docker-YYYYMMDD.img.gz
rk3568-sd-friendlywrt-22.03-YYYYMMDD.img.gz
rk3568-sd-friendlywrt-22.03-docker-YYYYMMDD.img.gz

If the file is in 7z, zip or rar format, you will need to extract it first. If the file is too large to write, you can compress it into .gz format and try again.

4.5.2.2 Option 2: Install OS via TF Card
4.5.2.2.1 Install OS to eMMC
  • This method firstly boots a mini Linux from a TF card and then automatically runs an EFlasher utility to install the OS to eMMC.
  • You can connect your system to an HDMI monitor and watch its progress. This is optional. You can watch its progress by observing its LEDs as well.
  • By default, the burning process starts automatically, if you want to change it to manual, you can use a file name containing the words "multiple-os", EFlasher will stay in the system selection interface, you need to use the mouse to select the system you want to burn.

Visit download link to download the needed utilities and image file:

Image File
rk3568-eflasher-friendlywrt-21.02-YYYYMMDD.img.gz FriendlyWrt
Based on OpenWrt 21.02
Kernel version 5.10.y
rk3568-eflasher-friendlywrt-21.02-docker-YYYYMMDD.img.gz FriendlyWrt
Pre-installed Docker
Based on OpenWrt 21.02
Kernel version 5.10.y
rk3568-eflasher-friendlywrt-22.03-YYYYMMDD.img.gz FriendlyWrt
Based on OpenWrt 22.03
Kernel version 5.10.y
rk3568-eflasher-friendlywrt-22.03-docker-YYYYMMDD.img.gz FriendlyWrt
Pre-installed Docker
Based on OpenWrt 22.03
Kernel version 5.10.y
rk3568-eflasher-debian-bullseye-core-5.10-arm64-YYYYMMDD.img.gz Debian 11(Bullseye) Core
No desktop environment, command line only
Kernel version 5.10.y
rk3568-eflasher-debian-bullseye-minimal-5.10-arm64-YYYYMMDD.img.gz Debian 11(Bullseye) Desktop
Uses LXDE as default desktop
No pre-installed recommended software
Supports hardware acceleration
Kernel version 5.10.y
rk3568-eflasher-debian-bullseye-desktop-5.10-arm64-YYYYMMDD.img.gz Debian 11(Bullseye) Desktop
Uses LXDE as default desktop
Pre-installed mpv, smplayer and chromium brower
Supports hardware acceleration
Kernel version 5.10.y
rk3568-eflasher-androidtv-YYYYMMDD.img.gz Android TV
rk3568-eflasher-android12-YYYYMMDD.img.gz Android12
rk3568-eflasher-ubuntu-focal-desktop-5.10-arm64-YYYYMMDD.img.gz Ubuntu20.04(Focal) Desktop
Uses LXQT as default desktop
Pre-installed mpv, smplayer and chromium brower
Supports hardware acceleration
Kernel version 5.10.y
rk3568-eflasher-friendlycore-focal-5.10-arm64-YYYYMMDD.img.gz FriendlyCore
Minimal system
Based on Ubuntu core 20.04
Included Qt5
kernel version 5.10.y
Other:
rk3568-eflasher-multiple-os-YYYYMMDD-25g.img.gz Multiple operating systems are included, you need to connect a monitor and mouse when booting, and select the operating system you want to burn on the interface
Flash Utility:
win32diskimager.rar Windows utility. Under Linux users can use "dd"

Here are the steps:

  • Get an SDHC card with a minimum capacity of 8G
  • Download a rk3568-eflasher-OSNAME-YYYYMMDD.img.gz image file and a win32diskimager;
  • Under Windows, run win32diskimager as administrator, select your SD card and extracted EFlasher image file, and click on “Write” to write image file on the SD card; or under Linux, you use the dd command to write the rk3568-eflasher-OSNAME-YYYYMMDD.img file to the SD card.
  • Eject your SD card and insert it to NanoPi-R5S’s microSD card slot.
  • Turn on NanoPi-R5S, it will boot from the SD card and automatically run EFlasher to install the OS to the board’s eMMC. You connect your board to an HDMI monitor or observer the board’s LEDs to watch its installation progress
Progress SYS LED(Red) LAN LED(Green) WAN LED(Green)
Power On Solid On Off Off
System Boot Slow Flashing Off Off
Installation in Progress Fast Flashing Off Off
Installation Done Slow Flashing Solid On Solid On
  • After installation is done, power off the board, eject the SD card from NanoPi-R5S, power on the board again, NanoPi-R5S will load the OS from its eMMC
4.5.2.2.2 Install Flash Image File to eMMC
  • Auto Install (Default Behavior)

1) Download an “eflasher” firmware from network drive, extract it and install it to a TF card ;
2) Eject and insert the TF card to your PC, after a “FriendlyARM” device shows up(Under Linux, it is a “FriendlyARM” directory), copy an .img or .gz file to the TF card.
3) Open the eflasher.conf file on the TF card, set “autoStart=” to the name of your image file, such as:

autoStart=openwrt-rockchip-armv8_nanopi-ext4-sysupgrade.img.gz

Anyone of the files that contain “-sd-” will work. Here is a list:

rk3568-sd-friendlywrt-22.03-YYYYMMDD.img.gz
rk3568-sd-friendlywrt-22.03-docker-YYYYMMDD.img.gz
rk3568-sd-friendlywrt-21.02-YYYYMMDD.img.gz
rk3568-sd-friendlywrt-21.02-docker-YYYYMMDD.img.gz
rk3568-sd-friendlycore-focal-5.10-arm64-YYYYMMDD.img.gz

4) Eject the TF card, insert the TF card to NanoPi-R5S, power it on it will automatically install your firmware. You can watch the installation progress by observing the LEDs’ status.

  • Disable Auto Installation

If you want to disable auto installation, please open the eflasher.conf file, set “autoStart=” to empty:

autoStart=

In this case, after the system boots, it will stay at the step where you are expected to select an image file. You need to connect an HDMI monitor and a USB mouse to your board and install a firmware on its UI;

4.5.2.3 Option 3: Install OS via USB
4.5.2.3.1 Step 1: Install USB Driver and Tools/Utilities

Download a driver file DriverAssitant_v5.1.1.zip under the “tools” directory from network drive, extract and install it.
Under the same directory, download a utility RKDevTool_Release_v2.84.zip and extract it.

4.5.2.3.2 Step 2: Connect NanoPi-R5S to PC and Enter Installation Mode

1) Disconnect the connected USB cable and the power cord from NanoPi-R5S, eject the TF card;
2) Press and hold the “Mask” key, power on the board. After the status LED has been on for at least 3 seconds, release the Mask key.
3) Use a USB A-to-A cable, connect NanoPi-R5S to a PC as follows. Note: please pay attention to the USB port the USB cable is connected to in the screenshot.
Nanopir5s-usba-to-usba2.jpg

4.5.2.3.3 Step 3: Install image to eMMC

A firmware in general is packaged in either of the two options: the first is an whole image (ie, update.img) which is often offered by third party developers, the second is that an image is packaged and placed in multiple partition images. FriendlyElec offers an image in the latter option.

  • Option 1: Install whole image (ie, update.img)

On a PC which has the extracted RKDevTool_Release_v2.84 utility, go to the RKDevTool_Release_v2.84 directory, run the RKDevTool.exe file. If everything works, you will see a “Found a new Maskrom device” message on the utility;
Go to “Upgrade Firmware(升级固件)”, click on “Firmware(固件)”, select your wanted image file, and click on “Upgrade(升级)” to install. After installation is done, your board will reboot automatically and load the system from eMMC;

  • Option 2: Install OS that is packaged & placed in multiple partition images

Go to network drive to download your needed package and extract it.

Image File
rk3568-usb-friendlywrt-21.02-YYYYMMDD.zip FriendlyWrt
Based on OpenWrt 21.02
Kernel version 5.10.y
rk3568-usb-friendlywrt-21.02-docker-YYYYMMDD.zip FriendlyWrt
Pre-installed Docker
Based on OpenWrt 21.02
Kernel version 5.10.y
rk3568-usb-friendlywrt-22.03-YYYYMMDD.zip FriendlyWrt
Based on OpenWrt 22.03
Kernel version 5.10.y
rk3568-usb-friendlywrt-22.03-docker-YYYYMMDD.zip FriendlyWrt
Pre-installed Docker
Based on OpenWrt 22.03
Kernel version 5.10.y
rk3568-usb-debian-bullseye-core-arm64-YYYYMMDD.zip Debian 11(Bullseye) Core
No desktop environment, command line only
Kernel version 5.10.y
rk3568-usb-debian-bullseye-minimal-arm64-YYYYMMDD.zip Debian 11(Bullseye) Desktop
Uses LXDE as default desktop
No pre-installed recommended software
Supports hardware acceleration
Kernel version 5.10.y
rk3568-usb-debian-bullseye-desktop-arm64-YYYYMMDD.zip Debian 11(Bullseye) Desktop
Uses LXDE as default desktop
Pre-installed mpv, smplayer and chromium brower
Supports hardware acceleration
Kernel version 5.10.y
rk3568-usb-androidtv-YYYYMMDD.img.zip Android TV
rk3568-usb-android12-YYYYMMDD.img.zip Android12
rk3568-usb-ubuntu-focal-desktop-5.10-arm64-YYYYMMDD.zip Ubuntu20.04(Focal) Desktop
Uses LXQT as default desktop
Pre-installed mpv, smplayer and chromium brower
Supports hardware acceleration
Kernel version 5.10.y
rk3568-usb-friendlycore-focal-5.10-arm64-YYYYMMDD.zip FriendlyCore
Minimal system
Based on Ubuntu core 20.04
kernel version 5.10.y

After it is extracted, you will see some utilities and a configuration file under the directory. double click on RKDevTool.exe, you will see a “Found a new Maskrom device” message on the utility. Click on the “Execute”, wait a moment and it will be installed. After installation is done your system will automatically reboot and load the system from eMMC.

4.6 The Boot order between eMMC and SD card

By default, the system will be booted from the TF card first, but this is not the case under all conditions. This section will explain all situations in detail;

Refer to rockchip official document [1], there are two types of loader program:
1) U-Boot TPL/SPL (i.e. upsream U-Boot, also called mainline U-Boot)
2) Rockchip MiniLoader

Things to note:
1) FriendlyELEC's image uses Rockchip MiniLoader
2) The third-party image usually uses U-Boot TPL/SPL

The following situations will always start from eMMC:
If the system in the eMMC, or the system in the TF card uses the first Loader type U-Boot TPL/SPL, it will always boot from the eMMC;
If you want to boot from the TF card, there are the following methods:
Method 1: Clear the Loader on the eMMC, the clearing method is as follows, after starting from the eMMC, enter the following command on the command line to clear the Loader on the eMMC:

dd if=/dev/zero of=/dev/mmcblk2 bs=8M count=1

Method 2: Insert the TF card, Press Maskrom Key (or short-circuit the Maskrom contacts) and then power on (need to keep the short-circuit for about 3 seconds), it will start from the TF card

The summary is as follows:

eMMC current system TF card current system Boot priority
No system Any image TF card
FriendlyELEC's image FriendlyELEC's image TF card
FriendlyELEC's image Image with Mainline U-boot eMMC
Image with Mainline U-boot FriendlyELEC's image eMMC
Image with Mainline U-boot Image with Mainline U-boot eMMC

5 Work with FriendlyWrt

5.1 Introduction to FriendlyWrt

FriendlyWrt is a customized system made by FriendlyElec based on an OpenWrt distribution. It is open source and well suitable for developing IoT applications, NAS applications etc.

5.2 First boot

For the first boot, the system needs to do the following initialization work:
1)Extended root file system
2)Initial setup(will execute /root/setup.sh)
So you need to wait for a while (about 2~3 minutes) to boot up for the first time, and then set FriendlyWrt, you can enter the ttyd terminal on the openwrt webpage, when the prompt is displayed as root@FriendlyWrt, it means the system has been initialized.

root@FriendlyWrt

5.3 Account & Password

The default password is password (empty password in some versions). Please set or change a safer password for web login and ssh login. It is recommended to complete this setting before connecting NanoPi-R5S to the Internet.

5.4 Login FriendlyWrt

Connect the PC to the LAN port of NanoPi-R5S. If your PC without a built-in ethernet port, connect the LAN port of the wireless AP to the LAN port of NanoPi-R5S, and then connect your PC to the wireless AP via WiFi , Enter the following URL on your PC's browser to access the admin page:

The above is the LAN port address of NanoPi-R5S. The IP address of the WAN port will be dynamically obtained from your main router through DHCP.

5.5 Recommended security settings

The following settings are highly recommended to complete before connecting NanoPi-R5S to the Internet。

  • Set a secure password
  • Only allow access to ssh from lan, change the port
  • Check the firewall settings

Set up as you wish.

5.6 Change LAN IP in LuCI

1) Click on Network → Interfaces, then click on the Edit button of the LAN Network;
2) In General Setup tab, input new IP address (for example: 192.168.11.1), click "Save" and then click "Save & Apply";
3) On the pop-up window with the title “Connectivity change“, click "Apply and revert on connectivity loss";
4) Wait a moment, enter the new address in your computer's browser and login to FriendlyWrt;

5.7 Safe shutdown operation

Enter the "Services" -> "Terminal", enter the "poweroff" command and hit enter, wait until the led light is off, and then unplug the power supply.

5.8 Soft Factory Reset

Enter "System"->"Backup/Flash firmware",Click “Perform reset“ Button, Your device's settings will be reset to defaults like when FriendlyWrt was first installed.
You can also do this in the terminal:

firstboot && reboot

5.9 Install Software Packages

5.9.1 Set up openwrt official opkg source

sed -i -e 's/mirrors.cloud.tencent.com/downloads.openwrt.org/g' /etc/opkg/distfeeds.conf
opkg update

5.9.2 Update Package List

Before install software packages update the package list:

$ opkg update

5.9.3 List Available Packages

$ opkg list

5.9.4 List Installed Packages

$ opkg list-installed

5.9.5 Install Packages

$ opkg install <package names>

5.9.6 Remove Packages

$ opkg remove <package names>

5.10 Disable IPv6

. /root/setup.sh
disable_ipv6
reboot

5.11 Configuring Quectel EC20 (4G module) dial-up networking

  • Go to "Network" -> "Interfaces"
  • Click "Delete" next to "WAN6", then click "Save & Apply"
  • Click "Edit" next to "WAN", in the "Device" drop-down menu, select "Ethernet Adapter: wwan0", in the "Protocol" drop-down menu, select "QMI Cellular" and click "Switch Protocol"
  • Click the "Modem Device" drop-down menu, select "/dev/cdc-wdm0", fill in the APN information (e.g. for China Mobile, enter "cmnet")
  • Click "Save" to close the dialog, Finally, click "Save & Apply" at the bottom of the page to initiate the dial-up process
  • Devices connected to LAN will have access to the Internet, If your device has a WiFi module, you can enable wireless AP functionality on the "Wireless" page and connect to the Internet via devices connected wirelessly

5.12 Some common issues of FriendlyWrt

  • Unable to dial up
    • Go to "Network" -> "Firewall" and set "Inbound Data", "Outbound Data" and "Forwarding" in "WAN Zone" to "Accept";
    • If you still cannot access the Internet, you can try to turn off IPV6;
  • Dial-up successful, but no outgoing traffic
    • Go to "Services" -> "Terminal" and type "fw4 reload" to try to reload the firewall settings again;
  • Unable to power on
    • Try to replace the power adapter and cable. It is recommended to use a power supply with specifications above 5V/2A;
    • Note that some fast chargers with Type-C interface will have a delay, it may take a few seconds to start providing power;
  • When doing secondary routing, the computer cannot connect to the Internet
    • If your main network is IPv4, and NanoPi-R5S works in IPv6, the computer may not be able to connect to the Internet. It is recommended to turn off IPv6 (the method is described later in this WiKi), or switch the main route to IPv6;
  • If you have questions or have better suggestions, please send an email to techsupport@friendlyarm.com;

5.13 Use USB2LCD to view IP and temperature

Plug the USB2LCD module to the USB interface ofNanoPi-R5S and power on, the IP address and CPU temperature will be displayed on the LCD:
Xxx-usb2lcd-01.png


5.14 How to use USB WiFi

5.14.1 Check USB WiFi Device with Command Line Utility

(1) Click on "services>ttyd" to start the command line utility

(2) Make sure no USB devices are connected to your board and run the following command to check if any USB devices are connected or not

lsusb

(3) Connect a USB WiFi device to the board and run the command again

lsusb

You will see a new device is detected. In our test the device's ID was 0BDA:C811

(4) Type your device's ID (in our case it was "0BDA:C811" or "VID_0BDA&PID_C811") in a search engine and you may find a device that matches the ID. In our case the device we got was Realtek 8811CU.

5.14.2 Configure a USB WiFi Device as AP

(1) Connect a USB WiFi device to the NanoPi-R5S. We recommend you to use the following devices:
R2swrt+usbwifi-20210831.jpg
Note: devices that match these VID&PIDs would most likely work.
(2) Click on "System>Reboot" and reboot your NanoPi-R5S

(3) Click on "Network>Wireless" to enter the WiFi configuration page

(4) Click on "Edit" to edit the configuration

(5) On the "Interface Configuration" page you can set the WiFi mode and SSID, and then go to "Wireless Security" to change the password. By default the password is "password". After you make your changes click on "Save" to save

(6) After you change the settings you can use a smartphone or PC to search for WiFi

5.14.3 Common USB WiFi issues

1) It is recommended to plug in the usb wifi in the off state, then power it on, FriendlyWrt will automatically generate the configuration file /etc/config/wireless, if not, see if there is wlan0 by ifconfig -a, if there is no wlan0, usually there is no driver.
2) If ifconfig -a sees wlan0, but the hotspot is not working properly, try changing the channel and country code, an inappropriate country code can also cause the WiFi to not work.
3) Some USB WiFis (e.g. MTK MT7662) work in CD-ROM mode by default and need to be switched by usb_modeswitch, you can try to add usb_modeswitch configuration to the following directory: /etc/usb_modeswitch.d.

5.14.4 Change the default WiFi hotspot configuration

FriendlyWrt sets the country, hotspot name and other parameters for USB WiFi by default, with the aim of being as plug-and-play as possible, but this does not guarantee that all modules will be compatible with this setting, you can change these behaviors by modifying the following file:

/lib/wifi/mac80211.sh

5.15 Work with Docker Applications

5.15.1 Work with Docker: Install JellyFin

mkdir -p /jellyfin/config
mkdir -p /jellyfin/videos
docker run --restart=always -d -p 8096:8096 -v /jellyfin/config:/config -v /jellyfin/videos:/videos jellyfin/jellyfin:10.1.0-arm64 -name myjellyfin

After installation, visit port 8096 and here is what you would find:
FriendlyWrt+JerryFin

5.15.2 Work with Docker: Install Personal Nextcloud

mkdir /nextcloud -p
docker run -d -p 8888:80  --name nextcloud  -v /nextcloud/:/var/www/html/ --restart=always --privileged=true  arm64v8/nextcloud

After installtion, visit port 8888.

5.15.3 Expand Docker Storage

  • Stop docker service first:
/etc/init.d/dockerd stop
  • Rename the original /opt directory, create an empty /opt directory:
mv /opt /opt-old && mkdir /opt
  • Format your drive as ext4, and mount it to the /opt directory:

Friendlywrt mount nvme opt-en.jpg

  • Enter the command "mount | grep /opt" to check the mount status:
root@FriendlyWrt:~# mount | grep /opt
/dev/nvme0n1p1 on /opt type ext4 (rw,relatime)
root@FriendlyWrt:~#
  • Copy the files from the original /opt directory to the new /opt directory:
cp -af /opt-old/* /opt/ && rm -rf /opt-old
  • Reboot the device
reboot
  • After reboot, go to the "Docker" -> "Overview" page, check the information in the "Docker Root Dir" line, you can see that the Docker space has been expanded:

Friendlywrt docker info-en.jpg

5.15.4 Docker FAQ and solutions

5.15.4.1 Unable to access the network services provided by the Docker container

Solution:

  • Go to the "Firewall" settings and set "Forwarding" to "Accept";
  • Turn off "Software Offload";

5.16 Mount smbfs

mount -t cifs //192.168.1.10/shared /movie -o username=xxx,password=yyy,file_mode=0644

5.17 Use sdk to compile the package

5.17.1 Install the compilation environment

Download and run the following script on 64-bit Ubuntu (version 18.04+): How to setup the Compiling Environment on Ubuntu bionic

5.17.2 Download and decompress sdk from the network disk

The sdk is located in the toolchain directory of the network disk:

tar xvf openwrt-sdk-*-rockchip-armv8_gcc-11.2.0_musl.Linux-x86_64.tar.xz
# If the path is too long, it will cause some package compilation errors, so change the directory name here
mv openwrt-sdk-*-rockchip-armv8_gcc-11.2.0_musl.Linux-x86_64 sdk
cd sdk
./scripts/feeds update -a
./scripts/feeds install -a

5.17.3 Compile the package

download the source code of the example (a total of 3 examples are example1, example2, example3), and copy to the package directory:

git clone https://github.com/mwarning/openwrt-examples.git
cp -rf openwrt-examples/example* package/
rm -rf openwrt-examples/

Then enter the configuration menu through the following command:

make menuconfig

In the menu, select the following packages we want to compile (actually selected by default):

"Utilities" => "example1"
"Utilities" => "example3"
"Network" => "VPN" => "example2"

execute the following commands to compile the three software packages:

make package/example1/compile V=99
make package/example2/compile V=99
make package/example3/compile V=99

After the compilation is successful, you can find the ipk file in the bin directory, as shown below:

$ find ./bin -name example*.ipk
./bin/packages/aarch64_generic/base/example3_1.0.0-220420.38257_aarch64_generic.ipk
./bin/packages/aarch64_generic/base/example1_1.0.0-220420.38257_aarch64_generic.ipk
./bin/packages/aarch64_generic/base/example2_1.0.0-220420.38257_aarch64_generic.ipk

5.17.4 Install the ipk to NanoPi

You can use the scp command to upload the ipk file to NanoPi:

cd ./bin/packages/aarch64_generic/base/
scp example*.ipk root@192.168.2.1:/root/

Then use the opkg command to install them:

cd /root/
opkg install example3_1.0.0-220420.38257_aarch64_generic.ipk
opkg install example1_1.0.0-220420.38257_aarch64_generic.ipk
opkg install example2_1.0.0-220420.38257_aarch64_generic.ipk

5.18 Build FriendlyWrt using GitHub Actions

Please refre this link: https://github.com/friendlyarm/Actions-FriendlyWrt

5.19 Compile u-boot,kernel or friendlywrt

6 Work with FriendlyCore

6.1 FriendlyCore User Account

  • Non-root User:
   User Name: pi
   Password: pi
  • Root:
   User Name: root
   Password: fa

6.2 Update Software Packages

$ sudo apt-get update

6.3 Setup Network Configurations

6.3.1 Set static IP address

By default "eth0" is assigned an IP address obtained via dhcp. If you want to change the setting you need to change the following file:

vi /etc/network/interfaces.d/eth0

For example if you want to assign a static IP to it you can run the following commands:

auto eth0
iface eth0 inet static
    address 192.168.1.231
    netmask 255.255.255.0
    gateway 192.168.1.1

The other two ethernet ports are set up with static IP addresses, as follows:
eth1: 192.168.2.1
eth2: 192.168.3.1 (Note: if there are three network ports)

6.3.2 Set a DNS

You also need to modify the following file to add the DNS configuration:

vi /etc/systemd/resolved.conf

For example, set to 192.168.1.1:

[Resolve]
DNS=192.168.1.1

Restart the systemd-resolved service with the following command:

sudo systemctl restart systemd-resolved.service
sudo systemctl enable systemd-resolved.service

6.3.3 Set up to use another network interface

To change the setting of "eth1" you can add a new file similar to eth0's configuration file under the /etc/network/interfaces.d/ directory.

6.4 Setup Wi-Fi

First, use the following command to check if Network-Manager is installed on your system:

which nmcli

If you have installed it, refer to this link to connect to WiFi: Use NetworkManager to configure network settings, If you do not have Network-Manager installed on your system, please refer to the following method to configure WiFi,
By default the WiFi device is "wlan0". You need to create a configuration file under "/etc/network/interfaces.d/" for WiFi:

vi /etc/network/interfaces.d/wlan0

Here is a sample wlan0 file:

auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid YourWiFiESSID
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk YourWiFiPassword

Please replace "YourWiFiESSID" and "YourWiFiPassword" with your WiFiESSID and password. After save and close the file you can connect to your WiFi source by running the following command:

sudo systemctl daemon-reload
sudo systemctl restart networking

After you power on your board it will automatically connect to your WiFi source.
Please note that if you use one TF card to boot multiple boards the WiFi device name will likely be named to "wlan1", "wlan2" and etc. You can reset it to "wlan0" by deleting the contents of the following file and reboot your board: /etc/udev/rules.d/70-persistent-net.rules

6.4.1 WiFi models supported

6.4.1.1 M.2 WiFi Module
  • RTL8822CE
6.4.1.2 Usb Dongle
  • RTL8821CU (Vid: 0BDA, Pid: C811) (Test sample:TP-Link TL-WDN5200H)
  • RTL8812AU (Vid: 0BDA, Pid: 8812)
  • MediaTek MT7662 (Vid: 0E8D, Pid: 7612) (Test sample:COMFAST CF-WU782AC V2)

6.5 Install the kernel-header package

sudo dpkg -i /opt/linux-headers-*.deb

6.6 Config status LEDs

First determine whether the system already exists the leds initialization service:

sudo systemctl status leds

If the leds service already exists, change the default behavior of the LEDs by editing the following file:

/etc/init.d/leds.sh

Since there is no leds service in the early firmware, you need to refer to the following guide to manually configure the LEDs. First, set the following kernel modules to be automatically loaded at boot:

modprobe ledtrig-netdev
echo ledtrig-netdev > /etc/modules-load.d/ledtrig-netdev.conf

Put the following into the autorun script to associate the status leds with the ethernet interface, and you can configure it to behave in other ways by referring to these content:

echo netdev > /sys/class/leds/wan_led/trigger
echo eth0 > /sys/class/leds/wan_led/device_name
echo 1 > /sys/class/leds/wan_led/link
 
echo netdev > /sys/class/leds/lan1_led/trigger
echo eth1 > /sys/class/leds/lan1_led/device_name
echo 1 > /sys/class/leds/lan1_led/link
 
echo netdev > /sys/class/leds/lan2_led/trigger
echo eth2 > /sys/class/leds/lan2_led/device_name
echo 1 > /sys/class/leds/lan2_led/link

7 Compile FriendlyWrt

7.1 Download Code

mkdir friendlywrt-rk3568
cd friendlywrt-rk3568
repo init -u https://github.com/friendlyarm/friendlywrt_manifests -b master-v22.03 \
        -m rk3568.xml --repo-url=https://github.com/friendlyarm/repo  --no-clone-bundle
repo sync -c  --no-clone-bundle

7.2 1-key Compile

./build.sh nanopi_r5s.mk

All the components (including u-boot, kernel, and friendlywrt) are compiled and the sd card image will be generated, then execute the following command to generate the image file for installing the system into the emmc:

./build.sh emmc-img

8 Make Your Own OS Image

9 Link to Rockchip Resources

10 Schematic, PCB CAD File

  • Schematic: []
  • PCB CAD File:[]


11 Update Logs

11.1 2024-03-15

11.1.1 Ubuntu focal desktop

  • Fix the bluetooth issue

11.2 2024-01-31

11.2.1 Debian/Ubuntu/FriendlyCore/Buildroot

  • Add adb support

11.2.2 Android 12 & Android TV

  • Add wifidisplay (no hdcp) support
  • Add Wi-Fi direct support for rtl8822ce and rtl8812au

11.2.3 FriendlyWrt

  • Add wireless repeater mode support for rtl8822ce

11.3 2023-12-23

11.3.1 Android 12 & Android TV

  • Fix the UsbCamera preview abnormal issue
  • Fix connection for ps5/dualshock controller
  • Improve support for non-16:9 resolutions in HDMI output
  • Update SDK to Rockchip Android 12.1 rkr14.2

11.3.2 FriendlyWrt

  • Fix an issue that unable to use eMMC tools for large-capacity eMMC

11.4 2023-12-01

11.4.1 FriendlyWrt

  • Update to openwrt-23.05.2

11.5 2023-11-13

11.5.1 Debian/Ubuntu/FriendlyCore

  • Updated npu driver to 0.9.2, fixed known issues

11.6 2023-10-31

11.6.1 Add a new system

  • Add NAS system OpenMediaVault, base on Debian 11 with kernel 6.1

11.6.2 Debian/Ubuntu/FriendlyCore

  • Update to kernel 6.1

11.6.3 FriendlyWrt

  • Update to kernel 6.1
  • Update to openwrt-23.05

11.7 2023-09-09

11.7.1 Android 12

11.8 2023-08-15

  • Update buildroot to linux-5.10-gen-rkr5.1

11.9 2023-07-19

11.9.1 Ubuntu Focal Desktop

  • Add Ubuntu 20.04 desktop, with LXQT lightweight desktop

11.9.2 Debian/Ubuntu/Android

  • Fix RTL9210 enclosures slowdown issue

11.9.3 FriendlyCore

  • Fixed HDMI display issue

11.10 2023-07-01

11.10.1 Debian11

  • Update to rockchip bsp linux-5.10-gen-rkr5, improve xserver and video playback performance
  • Update kernel to 5.10.160
  • Fix some known issues

11.11 2023-06-25

11.11.1 Debian11

  • Update mpp/ffmpeg/gsteamer-rockchip/libv4l-rkmpp/libdrm-cursor packages

11.11.2 Android TV & Android 12

  • Update to rockchip android-12.1-mid-rkr14
  • Upgrade kernel to 5.10.160
  • Add support for MediaTek MT7921 wireless card (WiFi only)

11.12 2023-06-16

11.12.1 Debian11

  • Merge changes from upsteam version rockchip linux-5.10-gen-rkr4.1
  • Improved UI performance and video playback performance
  • Add support for MediaTek MT7921 wireless card
  • Fix some known issues

11.13 2023-06-09

11.13.1 FriendlyWrt

  • Add support for MediaTek MT7921 wireless card

11.14 2023-06-06

11.14.1 Android TV & Android 12

  • Auto expand storage space for SD boot

11.15 2023-06-02

11.15.1 Android TV

  • Fix home button issue

11.16 2023-05-26

11.16.1 Debian11

  • Optimized r8125 performance and stability

11.16.2 FriendlyWrt

  • Updated v22.03 to openwrt-22.03.5
  • Updated v21.02 to openwrt-21.02.7
  • Optimized r8125 performance and stability

11.17 2023-05-21

11.17.1 Debian11

  • Update to Rockchip sdk version linux-5.10-gen-rkr4
  • Switch desktop to LXDE

11.18 2023-05-15

11.18.1 FriendlyCore Focal

  • Add Qt 5.10 support

11.19 2023-05-05

11.19.1 Android

  • Add USB bluetooth dongle support (rtl8761bu)
  • Add M.2 RTL8822CE bluetooth support

11.20 2023-04-26

11.20.1 FriendlyWrt:

  • Upgrade v22.03 to openwrt-22.03.4
  • Upgrade v21.02 to openwrt-21.02.6

11.21 2023-03-24

  • Fix the issue that Android Tablet and Android TV cannot start

11.22 2023-02-10

11.22.1 Android update

  • First release android tv for rk3568
  • android support direct boot from sd card
  • Fix the problem that in some cases hdmi has no signal output and needs to be plugged in once to recover
  • Support enable adb function through android interface

11.22.2 Added Debian11

There are three versions:

  • Debian11 Core: Command-line only
  • Debian11 Minimal: With Xfce desktop, lite version
  • Debian11 Desktop: With Xfce desktop, full version

11.23 2023-01-09

11.23.1 Android:

  • Fixed the problem that Android12 could not run on NanoPi-R5C
  • Add support for USB WiFi module and M.2 WiFi module (Model: RTL8822CE/RTL8812AU/MediaTek MT7662)
  • Update SDK to Rockchip android-12.1-mid-rkr12

11.23.2 FriendlyCore:

  • optimized the systemd service

11.24 2022-12-04

11.24.1 FriendlyWrt:

  • Fix the issue that the storage space cannot be expanded
  • Improve stability of the eMMC Tools
  • Add support for NanoPi-R5C

11.25 2022-09-06

11.25.1 FriendlyWrt:

  • Added Fullcone NAT support
  • upgrade to 22.03.0

11.26 2022-08-03

11.26.1 FriendlyWrt:

  • Upgrade FriendlyWrt to the latest version 22.03-rc6

11.27 2022-07-27

11.27.1 FriendlyWrt:

  • Add NAS menu category
  • Add wg driver module
  • Tweak configuration, docker version and non-docker version have exactly the same features, the difference is only docker

11.28 2022-07-04

11.28.1 FriendlyWrt & FriendlyCore:

  • Improved pci-e stability

11.28.2 Debian 10(buster) Desktop (New)

  • Uses LXDE as default desktop
  • Pre-installed mpv, smplayer and chromium brower
  • Supports hardware acceleration

11.29 2022-06-22

11.29.1 FriendlyWrt:

  • Upgrade kernel to 5.10.110

11.30 2022-06-21

11.30.1 FriendlyWrt:

11.30.1.1 eMMC Tools
  • Add support for burning firmware packaged in rockchip firmware format
  • Add an eMMC erase action when burning firmware to enhance compatibility

11.31 2022-06-15

11.31.1 FriendlyCore:

  • eth1, eth2 ports initialized with static IPs 192.168.2.1, 192.168.3.1
  • Added interrupt settings for NICs

11.32 2022-06-14

11.32.1 FriendlyWrt:

  • Optimised network performance, fixed poor tx performance in previous version of software
  • Improved package compatibility
  • Add support for "Restore factory settings"
  • eMMC Tools adds checksum for gz format firmware files
  • FriendlyWrt official stable version 21.02.3 is available, version 22.03.0 is still available
  • Some other detailed adjustments: Set time zone to Shanghai by default, remove lcd2usb, improve security settings, tune sysctl parameters, fix docker firewall settings, etc.

11.33 2022-05-16

Initial Release