Difference between revisions of "NanoPC-T4"

From FriendlyELEC WiKi
Jump to: navigation, search
(Introduction)
(Introduction)
Line 23: Line 23:
 
* USB 2.0: 2 independent native USB 2.0 Host A interfaces
 
* USB 2.0: 2 independent native USB 2.0 Host A interfaces
 
* USB 3.0: 1 native USB 3.0 Host A type interface
 
* USB 3.0: 1 native USB 3.0 Host A type interface
* USB Type-C: Supports USB3.0 Type-C DisplayPort 1.2 Alt Mode on USB Type-C
+
* USB Type-C: Supports USB3.0 Type-C and DisplayPort 1.2 Alt Mode on USB Type-C
 
* PCIe: One M.2 M-Key PCIe x4 socket, compatible with PCIe 2.1, Dual operation mode; Onboard M.2 2280 moduel M3 mounting Stud  
 
* PCIe: One M.2 M-Key PCIe x4 socket, compatible with PCIe 2.1, Dual operation mode; Onboard M.2 2280 moduel M3 mounting Stud  
 
* 40Pin GPIO Extension ports:  
 
* 40Pin GPIO Extension ports:  

Revision as of 04:41, 21 May 2018

查看中文

1 Introduction

Overview
Front
Back
  • SoC: Rockchip RK3399
    • CPU: big.LITTLE,Dual-Core Cortex-A72(up to 2.0GHz) + Quad-Core Cortex-A53(up to 1.5GHz)
    • GPU: Mali-T864 GPU,supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC
    • VPU: 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
  • PMU: RK808-D PMIC, cooperated with independent DC/DC, enabling DVFS, solfware power-down, RTC wake-up, system sleep mode
  • RAM: Dual-Channel 4GB LPDDR3
  • Flash: 16GB eMMC 5.1 Flash
  • Ethernet: Native Gigabit Ethernet
  • Wi-Fi/BT: 802.11a/b/g/n/ac, Bluetooth 4.1, Wi-Fi and Bluetooth combo module, dual antenna interface
  • Video Input: two 4-Line MIPI-CSI, dual ISP, up to 13MPix/s,supports simultaneous input of dual camera data
  • Video output
    • HDMI: HDMI 2.0a, supports 4K 60Hz,HDCP 1.4/2.2
    • DP on Type-C: DisplayPort 1.2 Alt Mode on USB Type-C
    • LCD Interface: one eDP 1.3(4 line,10.8Gbps), one 4-Line MIPI-DSI
  • Audio Out: 3.5mm Dual channel headphone jack, or HDMI
  • Audio In: Onboard microphone
  • USB 2.0: 2 independent native USB 2.0 Host A interfaces
  • USB 3.0: 1 native USB 3.0 Host A type interface
  • USB Type-C: Supports USB3.0 Type-C and DisplayPort 1.2 Alt Mode on USB Type-C
  • PCIe: One M.2 M-Key PCIe x4 socket, compatible with PCIe 2.1, Dual operation mode; Onboard M.2 2280 moduel M3 mounting Stud
  • 40Pin GPIO Extension ports:
    • 1 X 3V/1.8V I2C, up to 2 x 3V UART, 1 X 3V SPI, 1 x SPDIF_TX, up to 8 x 3V GPIOs
    • Eight-channel I2S, supports 8-channel digital microphone array input, 1.8V signal level
  • ADC: 3 x 1.8V ADC inputs, 5 Pin 2.54mm header
  • Debug: one Debug UART, 4 Pin 2.54mm header, 3V level, 1500000bps
  • Keys: PowerKey, Reset, MASKROM(BOOT), Recovery
  • LED: 1 x power LED and 1 x GPIO Controled LED
  • IR reciver: Onboard IR reciver, Acceptes 38KHz carrier frequency
  • RTC Battery: 2 Pin 1.27/1.25mm RTC battery input connector
  • Cooling: two 2.5mm studs for mounting heat sink; 3 Pin 12V cooling fan interface with PWM
  • Power supply: DC 12V/2A
  • PCB: Ten Layer, 100 mm x 64 mm
  • Ambient Operating Temperature: 0℃ to 80℃

2 Software Features

3 Diagram, Layout and Dimension

3.1 Layout

  • 40Pin GPIO Pin Spec
Pin# Name Pin# Name
  • eDP Interface Pin Spec
Pin# Name Pin# Name
  • MIPI-CSI Interface Pin Spec
Pin# MIPI-CSI2
  • MIPI-DSI Interface Pin Spec
Pin# Name


Notes
  1. For more details refer to the document:

3.2 Board Dimension

NanoPC-T3 Dimensions

For more details refer to the document:
  • Power Jack

4 Notes in Hardware Design