Matrix - T-Cobbler40 for Pi/zh

From FriendlyELEC WiKi
Revision as of 05:56, 16 November 2016 by Kangjing (Talk | contribs) (特性)

Jump to: navigation, search

English

1 介绍

Matrix - T-Cobbler40 for Pi
  • 模块Matrix - T-Cobbler40 for Pi是一个方便、实用的专为创客DIY打造的40 Pin IO接口扩展模块,模块使用40 Pin排线与Pi连接,2.54mm间距的排针可直接插接在面包板上,并在面包板上搭建电路。
  • 相比于使用杜邦线杂乱的连接面包板,使用T-Cobbler40 for Pi模块能更高效、快速、美观的搭建好电路,并能使用所有的Pi的40 Pin接口。

2 特性

  • 1个2.54mm 40Pin排线插座
  • 2个2.54mm 20Pin排针
  • PCB尺寸(mm):40x64

Matrix - T-Cobbler40 for Pi_PCB.PCB

  • 引脚说明:
  • 40 Pin排针引脚定义:
Pin# Name Pin# Name
1 SYS_3.3V 2 VDD_5V
3 SDA 4 VDD_5V
5 SCL 6 GND
7 GPIO#7 8 UART_TX
9 GND 10 UART_RX
11 GPIO#11 12 GPIO#12
13 GPIO#13 14 GND
15 GPIO#15 16 GPIO#16
17 SYS_3.3V 18 GPIO#18
19 SPI_MOSI 20 GND
21 SPI_MISO 22 GPIO#22
23 SPI_CLK 24 SPI_CS
25 GND 26 GPIO#26
27 GPIO#27 28 GPIO#28
29 GPIO#29 30 GND
31 GPIO#31 32 GPIO#32
33 GPIO#33 34 GND
35 GPIO#35 36 GPIO#36
37 GPIO#37 38 GPIO#38
39 GND 40 GPIO#40

3 硬件连接

3.1 连接NanoPi M1

参考下图连接模块:
Matrix-T-Cobbler40_nanopi_m1

4 代码说明

5 相关资料