Difference between revisions of "Matrix - T-Cobbler40 for Pi/zh"

From FriendlyELEC WiKi
Jump to: navigation, search
(介绍)
(特性)
Line 6: Line 6:
  
 
==特性==
 
==特性==
* 2个2.54mm 40Pin排针
+
* 1个2.54mm 40Pin排线插座
* 1个2.0mm 4Pin I2C0接口端子
+
* 2个2.54mm 20Pin排针
* 1个2.0mm 4Pin UART1接口端子
+
 
* PCB尺寸(mm):40x64
 
* PCB尺寸(mm):40x64
 
[[File:Matrix - T-Cobbler40 for Pi_PCB.png | frameless|400px|Matrix - T-Cobbler40 for Pi_PCB.PCB]]
 
[[File:Matrix - T-Cobbler40 for Pi_PCB.png | frameless|400px|Matrix - T-Cobbler40 for Pi_PCB.PCB]]
Line 58: Line 57:
 
|39  || GND              ||        ||40    || UART3_RX/SPI1_CLK/GPIOA14  || 14
 
|39  || GND              ||        ||40    || UART3_RX/SPI1_CLK/GPIOA14  || 14
 
|}
 
|}
 
 
  
 
==硬件连接==
 
==硬件连接==

Revision as of 05:25, 16 November 2016

English

1 介绍

Matrix - T-Cobbler40 for Pi
  • 模块Matrix - T-Cobbler40 for Pi是一个方便、实用的专为创客DIY打造的40 Pin IO接口扩展模块,模块使用40 Pin排线与Pi连接,2.54mm间距的排针可直接插接在面包板上,并在面包板上搭建电路。
  • 相比于使用杜邦线杂乱的连接面包板,使用T-Cobbler40 for Pi模块能更高效、快速、美观的搭建好电路,并能使用所有的Pi的40 Pin接口。

2 特性

  • 1个2.54mm 40Pin排线插座
  • 2个2.54mm 20Pin排针
  • PCB尺寸(mm):40x64

Matrix - T-Cobbler40 for Pi_PCB.PCB

  • 引脚说明:
  • 40 Pin排针引脚定义:
Pin# Name Linux gpio Pin# Name Linux gpio
1 SYS_3.3V 2 VDD_5V
3 I2C0_SDA 4 VDD_5V
5 I2C0_SCL 6 GND
7 GPIOG11 203 8 UART1_TX/GPIOG6 198
9 GND 10 UART1_RX/GPIOG7 199
11 UART2_TX/GPIOA0 0 12 PWM1/GPIOA6 6
13 UART2_RTS/GPIOA2 2 14 GND
15 UART2_CTS/GPIOA3 3 16 UART1_RTS/GPIOG8 200
17 SYS_3.3V 18 UART1_CTS/GPIOG9 201
19 SPI0_MOSI/GPIOC0 64 20 GND
21 SPI0_MISO/GPIOC1 65 22 UART2_RX/GPIOA1 1
23 SPI0_CLK/GPIOC2 93 24 SPI0_CS/GPIOC3 67
25 GND 26 SPDIF-OUT/GPIOA17 17
27 I2C1_SDA/GPIOA19 19 28 I2C1_SCL/GPIOA18 18
29 GPIOA20 20 30 GND
31 GPIOA21 21 32 GPIOA7 7
33 GPIOA8 8 34 GND
35 UART3_CTS/SPI1_MISO/GPIOA16 16 36 UART3_TX/SPI1_CS/GPIOA13 13
37 GPIOA9 9 38 UART3_RTS/SPI1_MOSI/GPIOA15 15
39 GND 40 UART3_RX/SPI1_CLK/GPIOA14 14

3 硬件连接

3.1 连接NanoPi M1

参考下图连接模块:
Matrix-T-Cobbler40_nanopi_m1

4 代码说明

5 相关资料