Difference between revisions of "BakeBit - Buzzer"

From FriendlyELEC WiKi
Jump to: navigation, search
(Hardware Connection)
(示例源代码)
Line 40: Line 40:
 
|}
 
|}
  
=== 示例源代码 ===
+
=== Source Code ===
  
 
<syntaxhighlight lang="python">
 
<syntaxhighlight lang="python">

Revision as of 13:44, 11 December 2016

查看中文

1 Introduction

Buzzer
  • The BakeBit-Buzzer is a passive buzzer. To drive this buzzer an oscillating source generating 2.7K square waves is needed.
  • PWM input signals with different frequencies generate different sounds.
  • It can be used in electronic devices that need sound generators.

2 Hardware Spec

  • Standard 2.0mm pitch 4 Pin BakeBit interface
  • PWM input
  • PCB dimension(mm): 20 x 24

Buzzer PCB

  • Pin Description:
Pin Description
GND Supply Voltage 5V
5V Gound
NC Not Connected
SIG PWM Input

3 Code Sample: Button And Buzzer

A BakeBit - Button module is needed in this test case.

3.1 Hardware Connection

Connect the buzzer module to the NEO-Hub at D3 and the button module to the NEO-Hub at D4:

Button And Buzzer-1.jpg Button And Buzzer-2.jpg

3.2 Source Code

import bakebit
import time
# Connect the BakeBit Ultrasonic Ranger to digital port D4
# SIG,NC,VCC,GND
ultrasonic_ranger = 4
 
# Connect the BakeBit LED to digital port D3
led = 3                                                                      
 
bakebit.pinMode(led,"OUTPUT")
light = 0
 
while True:
    try:
        # Read distance value from Ultrasonic
	distance = bakebit.ultrasonicRead(ultrasonic_ranger)
        print(distance)
	if distance > 0:
		if distance<10: 
			if light == 0:
				print("\ton")
				bakebit.digitalWrite(led,1)
				light = 1
		else:
			if light == 1:
				print("\toff")
				bakebit.digitalWrite(led,0)
				light = 0
	time.sleep(.2)
 
    except KeyboardInterrupt:
	bakebit.digitalWrite(led,0)
        break
 
    except TypeError:
        print ("Error")
    except IOError:
        print ("Error")

Github

3.3 运行示例

假设你已经参考bakebit教程安装了BakeBit源代码,
要运行示例程序,可以在开发板上进入 BakeBit/Software/Python目录,运行bakebit_prj_Button_And_Buzzer.py:

cd ~/BakeBit/Software/Python
sudo python bakebit_prj_Button_And_Buzzer.py

3.4 运行结果

当按下按键时,蜂鸣器会响起,松开按键时,蜂鸣器停止。

4 相关资料