Difference between revisions of "BakeBit - Button"

From FriendlyELEC WiKi
Jump to: navigation, search
(Created page with "查看中文")
 
Line 1: Line 1:
 
[[BakeBit - Button/zh|查看中文]]
 
[[BakeBit - Button/zh|查看中文]]
 +
 +
==Introduction==
 +
[[File:BakeBit - Button01.jpg|thumb|Button]]
 +
*BakeBit - Button是一个瞬时（非自锁）按钮开关模块，用于检测按键事件，按钮被释放后自动恢复到常态。
 +
*在按钮未被按下时模块输出高电平，按钮被按下后输出低电平。
 +
 +
==特性==
 +
* 使用标准的2.0mm 4 Pin BakeBit接口
 +
* 数字信号输出
 +
* PCB尺寸（mm）：20x24
 +
 +
[[File:BakeBit - Button002.png | frameless|300px|BakeBit - Button.PCB]]
 +
 +
* 引脚说明:
 +
{| class="wikitable"
 +
|-
 +
|名称 || 描述
 +
|-
 +
|GND  || 地
 +
|-
 +
|5V    || 电源5V
 +
|-
 +
|NC    || 空
 +
|-
 +
|SIG  || 信号
 +
|}
 +
== 示例程序：Button And Buzzer ==
 +
 +
本示例需要配合蜂鸣器使用。
 +
 +
=== 硬件连接 ===
 +
简单的将 蜂鸣器 模块插入 D3接口，将 按键 插入 D4 接口，如下面这样：
 +
 +
::{| class="wikitable"
 +
|-
 +
|[[File:Button And Buzzer-1.jpg |frameless|300px]]    || [[File:Button And Buzzer-2.jpg |frameless|300px]]
 +
|-
 +
|}
 +
 +
=== 示例源代码 ===
 +
 +
<syntaxhighlight lang="python">
 +
import bakebit
 +
import time
 +
# Connect the BakeBit Ultrasonic Ranger to digital port D4
 +
# SIG,NC,VCC,GND
 +
ultrasonic_ranger = 4
 +
 +
# Connect the BakeBit LED to digital port D3
 +
led = 3                                                                     
 +
 +
bakebit.pinMode(led,"OUTPUT")
 +
light = 0
 +
 +
while True:
 +
    try:
 +
        # Read distance value from Ultrasonic
 +
distance = bakebit.ultrasonicRead(ultrasonic_ranger)
 +
        print(distance)
 +
if distance > 0:
 +
if distance<10:
 +
if light == 0:
 +
print("\ton")
 +
bakebit.digitalWrite(led,1)
 +
light = 1
 +
else:
 +
if light == 1:
 +
print("\toff")
 +
bakebit.digitalWrite(led,0)
 +
light = 0
 +
time.sleep(.2)
 +
 +
    except KeyboardInterrupt:
 +
bakebit.digitalWrite(led,0)
 +
        break
 +
 +
    except TypeError:
 +
        print ("Error")
 +
    except IOError:
 +
        print ("Error")
 +
</syntaxhighlight>
 +
 +
[https://github.com/friendlyarm/BakeBit/blob/master/Software/Python/bakebit_prj_Button_And_Buzzer.py.py Github]
 +
 +
=== 运行示例 ===
 +
 +
假设你已经参考[http://wiki.friendlyarm.com/bakebit bakebit教程]安装了BakeBit源代码，<br />
 +
要运行示例程序，可以在开发板上进入 BakeBit/Software/Python目录,运行bakebit_prj_Button_And_Buzzer.py:
 +
<syntaxhighlight lang="bash">
 +
cd ~/BakeBit/Software/Python
 +
sudo python bakebit_prj_Button_And_Buzzer.py
 +
</syntaxhighlight>
 +
 +
=== 运行结果 ===
 +
 +
当按下按键时，蜂鸣器会响起，松开按键时，蜂鸣器停止。
 +
 +
==相关资料==
 +
*[Schematic]([http://wiki.friendlyarm.com/wiki/images/8/8a/05-SCHEMATIC_Button.pdf BakeBit - Button.pdf])
 +
*[BakeBit Github项目](https://github.com/friendlyarm/BakeBit)
 +
*[BakeBit Starter Kit手册](http://wiki.friendlyarm.com/bakebit/bakebit_starter_kit_manual_cn.pdf)

Revision as of 14:08, 11 December 2016

查看中文

1 Introduction

Button
  • BakeBit - Button是一个瞬时（非自锁）按钮开关模块，用于检测按键事件，按钮被释放后自动恢复到常态。
  • 在按钮未被按下时模块输出高电平，按钮被按下后输出低电平。

2 特性

  • 使用标准的2.0mm 4 Pin BakeBit接口
  • 数字信号输出
  • PCB尺寸（mm）：20x24

BakeBit - Button.PCB

  • 引脚说明:
名称 描述
GND 地
5V 电源5V
NC 空
SIG 信号

3 示例程序：Button And Buzzer

本示例需要配合蜂鸣器使用。

3.1 硬件连接

简单的将 蜂鸣器 模块插入 D3接口，将 按键 插入 D4 接口，如下面这样：

Button And Buzzer-1.jpg Button And Buzzer-2.jpg

3.2 示例源代码

import bakebit
import time
# Connect the BakeBit Ultrasonic Ranger to digital port D4
# SIG,NC,VCC,GND
ultrasonic_ranger = 4
 
# Connect the BakeBit LED to digital port D3
led = 3                                                                      
 
bakebit.pinMode(led,"OUTPUT")
light = 0
 
while True:
    try:
        # Read distance value from Ultrasonic
	distance = bakebit.ultrasonicRead(ultrasonic_ranger)
        print(distance)
	if distance > 0:
		if distance<10: 
			if light == 0:
				print("\ton")
				bakebit.digitalWrite(led,1)
				light = 1
		else:
			if light == 1:
				print("\toff")
				bakebit.digitalWrite(led,0)
				light = 0
	time.sleep(.2)
 
    except KeyboardInterrupt:
	bakebit.digitalWrite(led,0)
        break
 
    except TypeError:
        print ("Error")
    except IOError:
        print ("Error")

Github

3.3 运行示例

假设你已经参考bakebit教程安装了BakeBit源代码，
要运行示例程序，可以在开发板上进入 BakeBit/Software/Python目录,运行bakebit_prj_Button_And_Buzzer.py: 

cd ~/BakeBit/Software/Python
sudo python bakebit_prj_Button_And_Buzzer.py

3.4 运行结果

当按下按键时，蜂鸣器会响起，松开按键时，蜂鸣器停止。

4 相关资料

Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=BakeBit_-_Button&oldid=8283"