4x USB 3.0 HAT for M4

From FriendlyELEC WiKi
Revision as of 03:23, 26 June 2019 by Yonganch (Talk | contribs) (→‎Features)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

1 Features

Overview
Front
Back
M4 with USB HAT
  • USB 3.0
    • based on VL805 USB 3.0 host Controller, via a single PCIe 2.0 Lane
    • 4x USB 3.0 share 5Gbps Bandwidth
    • fully backward compatible with USB 2.0 and 1.1 specifications
  • USB 2.0
    • Two 4-PIN PH2.0 USB 2.0 host connectors, independent bandwidth
  • Power
    • One 5.5*2.1mm DC-Jack and One 4Pin PH2.0 connector for 12V Power Input
    • The output current of the 12V to 5V DC/DC regulator is up to 8A
    • One PowerKey button
  • Heat dissipation
    • One 2-PIN PH2.0 connector for fan. The 12V output is modulated by PWM1
  • GPIO
    • ALL the signals of the NanoPi M4's 40-PIN connector are populated

M4 USB HAT layout.jpg

2 Block

M4 USB HAT Block.jpg

3 USB3 19Pin IDC

Signal Pin# Pin# Signal
/ / 1 5V
5V 19 2 USB3 SSRX-_C
USB3 SSRX-_D 18 3 USB3 SSRX+_C
USB3 SSRX+_D 17 4 GND
GND 16 5 USB3 SSTX-_C
USB3 SSTX-_D 15 6 USB3 SSTX+_C
USB3 SSTX+_D 14 7 GND
GND 13 8 USB2 D-_C
USB2 D-_D 12 9 USB2 D+_C
USB2 D+_D 11 10 GND

4 Mechanical Specification

M4 USB HAT DIM.jpg

Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=4x_USB_3.0_HAT_for_M4&oldid=19589"