Difference between revisions of "1-bay NAS Dock v1.2 for NanoPi NEO/NEO2"

From FriendlyELEC WiKi
Jump to: navigation, search
(→‎硬件组装步骤)
Line 23: Line 23:
 
[[File:NAS Dock v1.2.png | frameless|500px|1-bay NAS Dock v1.2 for NanoPi NEO/NEO2.PCB]]
 
[[File:NAS Dock v1.2.png | frameless|500px|1-bay NAS Dock v1.2 for NanoPi NEO/NEO2.PCB]]
  
−
==硬件组装步骤==
+
==Hardware Setup==
−
搭建NAS设备，您需要准备以下物品：<br>
+
Essentials You Need for a Complete NAS Solution:<br>
−
(1) 1-bay NAS Dock v1.2 for NanoPi NEO/NEO2；<br>
+
(1) 1-bay NAS Dock v1.2 for NanoPi NEO/NEO2;<br>
−
(2) 配套螺丝；<br>
+
(2) Screw set;<br>
−
(3) 2.5寸HDD硬盘；<br>
+
(3) 2.5" HDD hard disk;<br>
−
(4) 带散热片的NanoPi NEO。<br>
+
(4) NanoPi NEO/Air/NEO2 with heat sink<br>
−
[[File:step0-v1.2.png | frameless|500px|清单]]<br>
+
[[File:step0-v1.2.png | frameless|500px| List]]<br>
−
NAS设备组装步骤如下：<br>
+
Steps to Assemble a NAS Device:<br>
−
(1)把硬盘装配在模块的SATA接口，并在底面用螺丝固定，如下图所示<br>
+
(1) Connect a 2.5"SATA hard disk to the dock and mount the disk on the dock with four screws<br>
−
[[File:step1-v1.2.png | frameless|500px|步骤(1)]] [[File:step2-v1.2.png | frameless|500px|步骤(2)]] <br>
+
[[File:step1-v1.2.png | frameless|500px| Step (1)]] [[File:step2-v1.2.png | frameless|500px| Step (2)]] <br>
−
(2)把NanoPi NEO倒扣安装在排母上，如下图所示<br>
+
(2) Connect a NanoPi NEO/Air/NEO2 with pin-headers to the NAS Dock<br>
−
[[File:step3-v1.2.png | frameless|500px|步骤(3)]]<br>
+
[[File:step3-v1.2.png | frameless|500px| Step (3)]]<br>
−
(3)接上12V电源，硬件组装就完成了，如下图所示<br>
+
(3) Connect a 12V power to the NAS Dock and all done<br>
−
[[File:step4-v1.2.png | frameless|500px|步骤(4)]]<br>
+
[[File:step4-v1.2.png | frameless|500px| Step(4)]]<br>
  
 
==1-bay NAS Dock v1.2 for NanoPi NEO/NEO2软件系统==
 
==1-bay NAS Dock v1.2 for NanoPi NEO/NEO2软件系统==

Revision as of 09:31, 28 April 2017

查看中文

1 Introduction

1-bay NAS Dock v1.2 for NanoPi NEO/NEO2
  • The 1-bay NAS Dock v1.2 for NanoPi NEO/NEO2 is an expansion board which can be used to connect an external hard disk to a FriendlyElec's NanoPi NEO/Air/NEO2. Together with FriendlyElec's customized aluminum case and NanoPi NEO/Air/NEO2 you can quickly assemble a storage server.
  • It uses JM20329 USB2SATA IC and communicates with a NanoPi NEO/Air/NEO2 via USB interface.
  • It works with a 2.5" SATA hard disk or SSD.
  • It uses TI's DC-DC chipset to convert a 12V input to 5V. It has a power switch for users to turn on/off the device.
  • Its dual-color LED can indicate a connected hard disk's status. When the LED is green it means the power is on. When it is red-blinking it means the connected hard disk is reading/writing.Warning: when the status LED is red-blinking do NOT shut down the power or plug/unplug the power.
  • The onboard DS1307 RTC IC can provide precise clock for the board. A button cell can be used to power the RTC when the board is disconnected from power supply.
  • It has an I2C interface.

2 Hardware Spec

  • High-speed USB2SATA IC JM20329
  • Input voltage:12V
  • Onboard switch
  • Onboard RTC
  • Dual-color LED
  • USB Host
  • Customized aluminum case
  • Ready-to-go software system
  • PCB dimension(mm): 151 x 90

1-bay NAS Dock v1.2 for NanoPi NEO/NEO2.PCB

3 Hardware Setup

Essentials You Need for a Complete NAS Solution:
(1) 1-bay NAS Dock v1.2 for NanoPi NEO/NEO2;
(2) Screw set;
(3) 2.5" HDD hard disk;
(4) NanoPi NEO/Air/NEO2 with heat sink
List
Steps to Assemble a NAS Device:
(1) Connect a 2.5"SATA hard disk to the dock and mount the disk on the dock with four screws
Step (1) Step (2)
(2) Connect a NanoPi NEO/Air/NEO2 with pin-headers to the NAS Dock
Step (3)
(3) Connect a 12V power to the NAS Dock and all done
Step(4)

4 1-bay NAS Dock v1.2 for NanoPi NEO/NEO2软件系统

1-bay NAS Dock v1.2 for NanoPi NEO/NEO2的软件系统是一个基于 Debian8 Jessie构建，并预装 OpenMediaVault 的集成系统，OpenMediaVault丰富的功能插件也集成其中，开箱即用。

OpenMediaVault是Linux下目前最为流行的开源网络附加存储(NAS)解决方案，它包含众多服务,如SSH,(S)FTP,SMB / CIFS,DAAP媒体服务器,RSync,BitTorrent客户机等，并且支持插件扩展。

5 软件系统安装

5.1 制作可直接启动的TF卡

5.1.1 下载Debian for NAS固件

请根据开发板型号，下载对应的固件文件和工具，固件文件位于officail-ROMs目录，工具位于tools目录:

开发板型号 固件文件名 下载地址
NanoPi NEO nanopi-neo_debian-nas-jessie_4.11.0_YYYYMMDD.img.zip 点击进入
NanoPi NEO2 nanopi-neo2_debian-nas-jessie_4.11.0_YYYYMMDD.img.zip 点击进入
烧写工具：
win32diskimager.rar Windows平台下的系统烧写工具，Linux平台下可以用dd命令烧写系统

为Nas所提供的系统基于Debian构建，并预装了OpenMediaVault软件。

5.1.2 制作TF卡

将固件Debian-for-nas-YYYYMMDD.img.zip和烧写工具win32diskimager.rar分别解压，在Windows下插入TF卡（限4G及以上的卡)，以管理员身份运行 win32diskimager 工具， 在win32diskimager工具的界面上，选择你的TF卡盘符，选择系统固件，点击 Write 按钮烧写即可。

烧写完成后，将制作好TF卡插入NanoPi NEO，使用12V电源给1-Bay NAS供电， 打开1-Bay NAS开关，看到NanoPi NEO上的蓝色LED闪烁，这说明系统已经开始启动了。

6 NAS的配置

访问你的路由器管理页面，在连接主机列表中找到 NanoPi NEO 的IP地址 (Hostname显示为FriendlyELEC)，然后在电脑游览器上，直接访问该IP地址即可进入 OpenMediaVault 界面，OpenMediaVault默认的帐号为：
用户名：admin
密码：openmediavault

OpenMediaVault登录后的首页如下图所示：
OpenMediaVault

7 更新日志

7.1 2017-04-05

  • 升级Linux内核至版本为4.11，使用主线内核

8 相关资料

OpenMediaVault官方网站：http://www.openmediavault.org/。

Retrieved from "https://wiki.friendlyelec.com/wiki/index.php?title=1-bay_NAS_Dock_v1.2_for_NanoPi_NEO/NEO2&oldid=10308"