Difference between revisions of "1-bay NAS Dock"

From FriendlyELEC WiKi
Jump to: navigation, search
(Introduction)
(特性)
Line 9: Line 9:
 
* Its dual-color LED can indicate a connected hard disk's status. When the LED is green it means the power is on. When it is red-blinking it means the connected hard disk is reading/writing.Warning: when the status LED is red-blinking do NOT shut down the power or plug/unplug the power.
 
* Its dual-color LED can indicate a connected hard disk's status. When the LED is green it means the power is on. When it is red-blinking it means the connected hard disk is reading/writing.Warning: when the status LED is red-blinking do NOT shut down the power or plug/unplug the power.
  
==特性==
+
==Hardware Spec==
* 使用高速稳定的USB转SATA芯片
+
* High-speed USB2SATA IC JM20329
* 输入电压:12V
+
* Supply voltage:12V
* 板载电源开关
+
* Onboard switch
* 双色状态指示灯
+
* Dual-color status LED
* USB Host接口
+
* USB Host
* 定制的金属外壳
+
* Customized aluminum case
* 完善的软件解决方案
+
* Ready-to-go software system
* PCB尺寸(mm):151x89.7
+
* PCB dimension(mm): 151 x 89.7
 
[[File:NAS Dock.png | frameless|500px|NAS Dock-01.PCB]]
 
[[File:NAS Dock.png | frameless|500px|NAS Dock-01.PCB]]
  

Revision as of 14:09, 1 April 2017

查看中文

1 Introduction

1-bay NAS Dock
  • The 1-bay NAS Dock is an expansion board which can be used to connect an external hard disk to a FriendlyElec’s NanoPi NEO. Together with FriendlyElec's customized aluminum case and NanoPi NEO you can quickly assemble a storage server.
  • It uses JM20329 USB2SATA IC and communicates with a NanoPi NEO via USB interface.
  • It works with a 2.5" SATA hard disk.
  • It uses TI’s DC-DC chipset to convert a 12V input to 5V. It has a power switch for users to turn on/off the device.
  • Its dual-color LED can indicate a connected hard disk's status. When the LED is green it means the power is on. When it is red-blinking it means the connected hard disk is reading/writing.Warning: when the status LED is red-blinking do NOT shut down the power or plug/unplug the power.

2 Hardware Spec

  • High-speed USB2SATA IC JM20329
  • Supply voltage:12V
  • Onboard switch
  • Dual-color status LED
  • USB Host
  • Customized aluminum case
  • Ready-to-go software system
  • PCB dimension(mm): 151 x 89.7

NAS Dock-01.PCB

3 硬件组装步骤

搭建NAS设备,您需要准备以下物品:
(1) 1-bay NAS Dock;
(2) 配套螺丝;
(3) 2.5寸HDD硬盘;
(4) 带散热片的NanoPi NEO。
清单
NAS设备组装步骤如下:
(1)把硬盘装配在模块的SATA接口,并在底面用螺丝固定,如下图所示
步骤(1) 步骤(2)
(2)把NanoPi NEO倒扣安装在排母上,如下图所示
步骤(3)
(3)接上12V电源,硬件组装就完成了,如下图所示
步骤(4)

4 软件安装

4.1 制作一张运行OpenMediaVault的TF卡

4.1.1 下载系统固件

首先访问下载地址下载固件文件(officail-ROMs目录)和烧写工具(tools目录):

使用以下固件:
Debian-for-nas-YYYYMMDD.img.zip 预装了OpenMediaVault软件的Debian系统固件
烧写工具:
win32diskimager.rar Windows平台下的系统烧写工具,Linux平台下可以用dd命令烧写系统

4.1.2 制作系统TF卡

将固件Debian-for-nas-YYYYMMDD.img.zip和烧写工具win32diskimager.rar分别解压,在Windows下插入TF卡(限4G及以上的卡),以管理员身份运行 win32diskimager 工具, 在win32diskimager工具的界面上,选择你的TF卡盘符,选择系统固件,点击 Write 按钮烧写即可。

烧写完成后,将制作好TF卡插入NanoPi NEO,使用12V电源给1-Bay NAS供电, 打开1-Bay NAS开关,看到NanoPi NEO上的蓝色LED闪烁,这说明系统已经开始启动了。

4.2 OpenMediaVault 的使用

test

5 相关资料